CrumblinHerb
New member
that show was on BBC, seen it about a year ago.
http://www.youtube.com/watch?v=qA_-zquyY1A found it on the tube. good viewing
-
Happy Birthday ICMag! Been 20 years since Gypsy Nirvana created the forum! We are celebrating with a 4/20 Giveaway and by launching a new Patreon tier called "420club". You can read more here.
-
Important notice: ICMag's T.O.U. has been updated. Please review it here. For your convenience, it is also available in the main forum menu, under 'Quick Links"!
Blue Dream Full Melt tested at 68% THC!!!
- Thread starter Thundurkel
- Start date
that show was on BBC, seen it about a year ago.
http://www.youtube.com/watch?v=qA_-zquyY1A found it on the tube. good viewing
Trick to SUPER QUALITY hash : Using a Bubblenow etc type wash machine, get that water COLD use more ice than the machine can turn and allow a quantity to melt and really chill the water.
Once the water has chilled and enough ice has melted to not jam the washer, add the wash bag with pre-frozen trim and set timer for 3 - 5 minutes. Strain the washer through the bags and drain them at the same time into another bucket.
A SHORT wash serves two purposes:
#1 ) The trim remains super cold the whole time making the trics extremely brittle. You WILL NOT lose much quantity doing a very short first run IMO. I always throw the wash bag into the fridge or freezer (depending on how fast I can work out the first run hash) and do a 2nd wash at the full timer setting of the wash machine. This 2nd run normally contains just as much quantity as the 1st short wash with more contaminate.
#2) The hash from the 1st run will be better for 2 reasons, the first being lower concentration of any impurities. It also helps the resin to retain any terpenes that are be water soluble. My first run hash always taste better and the terpenes have an effect on the way the hash smokes as well IMO.
Once the water has chilled and enough ice has melted to not jam the washer, add the wash bag with pre-frozen trim and set timer for 3 - 5 minutes. Strain the washer through the bags and drain them at the same time into another bucket.
A SHORT wash serves two purposes:
#1 ) The trim remains super cold the whole time making the trics extremely brittle. You WILL NOT lose much quantity doing a very short first run IMO. I always throw the wash bag into the fridge or freezer (depending on how fast I can work out the first run hash) and do a 2nd wash at the full timer setting of the wash machine. This 2nd run normally contains just as much quantity as the 1st short wash with more contaminate.
#2) The hash from the 1st run will be better for 2 reasons, the first being lower concentration of any impurities. It also helps the resin to retain any terpenes that are be water soluble. My first run hash always taste better and the terpenes have an effect on the way the hash smokes as well IMO.
Yeah, you can do a short/long wash by hand but it takes longer, getting the resin out of the water ASAP is key IMO
I'm pretty sure that's how dude got this quality I know he used a Iceolator or whatever the washing machine thing is haha
I have pics, in other member's galleries, of some hash I helped them make using the 2 wash method....
Let me hunt them down and I'll post em up
Let me hunt them down and I'll post em up
Hash from Two wash method
Hash from Two wash method
Bubba Kush hash made with Payload bags and Payload washer. Most of what you see, in the two biggest piles, is the 100u bag 1st and 2nd wash. 1st wash is on the pressing screen, 2nd wash is what's on the cardboard. As you can see, especially on the first wash, the other bags were mostly empty.
And finally, some of the same hash pressed. Pic from the gang's 4/20 gathering:
Hash from Two wash method
Bubba Kush hash made with Payload bags and Payload washer. Most of what you see, in the two biggest piles, is the 100u bag 1st and 2nd wash. 1st wash is on the pressing screen, 2nd wash is what's on the cardboard. As you can see, especially on the first wash, the other bags were mostly empty.
Blue Dreams!! 
I can't even begin to express, just how much I loved the Blue Dream FMB we got at Harborside back in April. It's amazing!! Tastes just like fruity pebbles and disappears as soon as heat comes anywhere near it. Truly delightful medicine! And to think, the batch you got your paws on must be even better! I have a bit left back at my parent's house that I'm hanging on to for a special session.
Cheers Thundurkel! Enjoy that medicine!!
As for testing; you are fortunate to have access to a testing facility; we really need one out here. It's like pulling teeth just to get a dispensary to tell you how the resins were collected; and that's IF they know at all. Most people around here don't understand what you're asking when you ask them what extraction method was used to make the hash...much less having thought to ask the hash maker how it was made.
One particular place, claims to have "cryogenic" hash, touting it as having tested at "100%". Now, I am def. no expert on cryo. but I am pretty sure that this, is not "cryogenic hash", 
more likely BHO.
Perhaps people wouldn't be so bold as to try something like that, if testing was more readily available.
Happy medicating everyone! Cheers!
I can't even begin to express, just how much I loved the Blue Dream FMB we got at Harborside back in April. It's amazing!! Tastes just like fruity pebbles and disappears as soon as heat comes anywhere near it. Truly delightful medicine! And to think, the batch you got your paws on must be even better! I have a bit left back at my parent's house that I'm hanging on to for a special session.
Cheers Thundurkel! Enjoy that medicine!!
As for testing; you are fortunate to have access to a testing facility; we really need one out here. It's like pulling teeth just to get a dispensary to tell you how the resins were collected; and that's IF they know at all. Most people around here don't understand what you're asking when you ask them what extraction method was used to make the hash...much less having thought to ask the hash maker how it was made.
One particular place, claims to have "cryogenic" hash, touting it as having tested at "100%". Now, I am def. no expert on cryo. but I am pretty sure that this, is not "cryogenic hash", more likely BHO. Perhaps people wouldn't be so bold as to try something like that, if testing was more readily available.
Happy medicating everyone! Cheers!
Twisted Metal
Member
Awesome pics and report mate!!!
L
LowGrow
I did not mean to spread misinformation I just didn't explain it correctly which I then re-researched and gave you the complete answer so misinformation I spread not I am learning just like everybody else. Furthermore some people get bad anxiety/headaches with high thc levels so for some people they would not get a "high" instead they would have a bad experience. I am just saying that 100% thc would be useless because without the other chemicals the "high" would not be enjoyable unless you just so happen to be immune to thc's negative effects which are counteracted by the plants other chemicals naturally. If you read my previous post completely you would have learned that thc can be used as a lump term for 3 different chemicals. So yes I did accidentally spread misinformation but in the light of you questioning my ignorance we have both surely learned something unless you ignored/didn't care enough to read my last post and then you would have no right saying anything to me as the refusal to learn is what causes ignorance and misinformation in the first place. Thank you for opening my eyes and other peoples by questioning me, questioning those who appear to have the answers needs to be done more often imho.
D
danimal7
ouch!! your poor lungs must be aching . that is some killer looking shit. the highest I ever got on bubble or weed for that matter ...is when I put a chunk O bubble ,5g's maybe (milkdud sized) in a shot glass with tbl spoon of butter then in the microwave for 5-10 seconds then chugged ...then had to go hide
blinkisback
Member
You sir need to learn what high potency extract looks like... Some of the oil I made turned out like that. However, that screen shot shows something other than oil being burned, hash. If harborside tested it at 68%, it's fuckin 68%.
SnozzleBerry
Member
gimme gimme gimme, that shit looks incredible...
Amen to that bro!
blinkisback
Member
No those are just a lot of resin heads pressed together...
Oh yea? you a chick hahaha j/k
