Getting started with a new veg cab!
- Thread starter bounty29
- Start date
Thanks for the posts everyone, hopefully I'll be able to upload some pics soon, I was hoping to get a side by side comparison every 7 days. That'll be tomorrow. If we still can't upload them here I'll find someplace else to put them so everyone can see them.
The plants are looking great, they responded very well to their feeding yesterday, they're very perky and healthy looking today.
Also, in the past few days I've been extremely productive and there's been a few changes. I think I'll be staying in this apartment so I can start flowering in the next couple weeks. That's not even the best part. I've been running around the past two days from the hardware store to the hydro shop and back to the hardware store. In total I probably spent about $150, but what that got me was...
Four site recirculating drip coco setup, with a six gallon reservoir
GH FloraMicro, FloraBloom, Liquid KoolBloom
Some other misc. odds and ends for the cabinets
Overall I'm pretty excited, as soon as I can get some clones off the plants going right now I'm going to put them into flower. I'm not sure if I'll veg them, if I do it won't be more than a week or so. I'm going to use Rezdog's feeding schedule this time around, see how that works out for me. Hopefully I'll be showing you guys some great things in a few months!
The plants are looking great, they responded very well to their feeding yesterday, they're very perky and healthy looking today.
Also, in the past few days I've been extremely productive and there's been a few changes. I think I'll be staying in this apartment so I can start flowering in the next couple weeks. That's not even the best part. I've been running around the past two days from the hardware store to the hydro shop and back to the hardware store. In total I probably spent about $150, but what that got me was...
Four site recirculating drip coco setup, with a six gallon reservoir
GH FloraMicro, FloraBloom, Liquid KoolBloom
Some other misc. odds and ends for the cabinets
Overall I'm pretty excited, as soon as I can get some clones off the plants going right now I'm going to put them into flower. I'm not sure if I'll veg them, if I do it won't be more than a week or so. I'm going to use Rezdog's feeding schedule this time around, see how that works out for me. Hopefully I'll be showing you guys some great things in a few months!
Blockhead Day 18......................................Day 24....................................................Day 31
MaT1 Day 14............................................Day 21....................................................Day 28
MaT2 Day 14............................................Day 21....................................................Day 28
MaT3 Day 14............................................Day 21....................................................Day 28
MaT4 Day 14............................................Day 21....................................................Day 28
MaT5 Day 14............................................Day 21....................................................Day 28
This post has been optimized for 1280x1024 resolution.
MaT1 Day 14............................................Day 21....................................................Day 28
MaT2 Day 14............................................Day 21....................................................Day 28
MaT3 Day 14............................................Day 21....................................................Day 28
MaT4 Day 14............................................Day 21....................................................Day 28
MaT5 Day 14............................................Day 21....................................................Day 28
This post has been optimized for 1280x1024 resolution.
Last edited:
Huggie bear
Active member
jrw said:Yeh! Great update
Love the comparison pics.
And dude, all I've ever tried is soil - wtf is this thing? Heh
What's the idea behind it?
Are you gonna wait for them to show sex before you move them into the coco-drip-apparatus?
lol I was wondering the same thing
Hey bounty your plants are looking great stop by my micro cab grow and drop some wisdom on my current questions for me
InPotiTrust
Member
Hey bounty your grow is moving faster than a 5 crack whore that just saw a cop 
.Your plants are looking great tho 
.Your plants are looking great tho
Thanks for the posts guys, let me explain my current plan, it changes just about every day now. Right now, I think I'm going to top these plants very soon and put the tops into 12/12 for them to show sex. Then I'll get rid of the males, and hopefully by that time I'll be able to take a few clones from the remaining female plants.
As soon as those root, depending on how many I have, I might put four clones from one plant into my dripper setup, which would probably end better because they'll all respond the same to feedings, but if I have a few females I'll probably put at least one of each into the coco. It all depends on what I get for females, so that's what I'm shooting for right now, sexing the plants.
What that dripper setup is is basically an automated watering system. Even if you're growing soil, you could set a timer to water it once every few days or whatever, but the way I'm using it is going to be more of a hydro application. There's an amazing amount of info in the Growing in Coco Coir sub-forum and I'm still deciding on the details. I have a pretty fine coco so I'll probably only be watering twice a day at most, but we'll see how the plants respond and how moist the coco is once it's all setup.
Huggiebear - You should put a link to your grow in your signature so people can check it out easier, go to the User Menu up top, and then go to Edit Signature. Put the url for your grow there with a little description or something, you'll get more visitors! I'll check it out right now though.
One of my plants, the one with the least soil in the cup, was looking thirsty before all the other ones today. I watered it and let it sit in a dish of water so it could soak it up for maybe an hour, but it looks extremely over watered now. I think the submerge watering technique has contributed a lot to my grow, it's definitely something I'll be using for a long time.
As soon as those root, depending on how many I have, I might put four clones from one plant into my dripper setup, which would probably end better because they'll all respond the same to feedings, but if I have a few females I'll probably put at least one of each into the coco. It all depends on what I get for females, so that's what I'm shooting for right now, sexing the plants.
What that dripper setup is is basically an automated watering system. Even if you're growing soil, you could set a timer to water it once every few days or whatever, but the way I'm using it is going to be more of a hydro application. There's an amazing amount of info in the Growing in Coco Coir sub-forum and I'm still deciding on the details. I have a pretty fine coco so I'll probably only be watering twice a day at most, but we'll see how the plants respond and how moist the coco is once it's all setup.
Huggiebear - You should put a link to your grow in your signature so people can check it out easier, go to the User Menu up top, and then go to Edit Signature. Put the url for your grow there with a little description or something, you'll get more visitors! I'll check it out right now though.
One of my plants, the one with the least soil in the cup, was looking thirsty before all the other ones today. I watered it and let it sit in a dish of water so it could soak it up for maybe an hour, but it looks extremely over watered now. I think the submerge watering technique has contributed a lot to my grow, it's definitely something I'll be using for a long time.
Huggie bear
Active member
Going to have to research this submersion water technique you are talking about..
upgradeshafted
Member
nice cab bounty29 if you dont mind where did you get that darkoom vent?
Huggie bear
Active member
I have seen the 4 inch round ones but cant seem to find the 6 inch square ones.
upgradeshafted - Thanks for stopping by, your SD is looking great, getting close now huh? I just sprouted two the other day, can't wait to get them flowering again.
http://www.adorama.com/DKL82.html?searchinfo=louver&item_no=8
Two for $40, so much easier than doing ducting with a bunch of turns, takes up a lot less space too. They have the round ones on that site too, but I've heard they're not as light-proof as these ones, and also I find it easier to cut square holes than it is to cut circles.
Huggie bear -
I just fed them with a new recipe today, instead of PBP and LK, I used 6ml FloraMicro and 9ml of FloraBloom, at 6.0PH. This new recipe has almost twice as much N, so we'll see how they respond. I think I'll top them in about 6 hours and then throw those right into 12/12 to figure out sex asap.
http://www.adorama.com/DKL82.html?searchinfo=louver&item_no=8
Two for $40, so much easier than doing ducting with a bunch of turns, takes up a lot less space too. They have the round ones on that site too, but I've heard they're not as light-proof as these ones, and also I find it easier to cut square holes than it is to cut circles.
Huggie bear -
That's from DrBudGreeneGene's "Compact SOG with CFL's" thread, there's a lot of good information in it if you read through, he does things differently than a lot of people but he has great results. I'm going to mix up some food for the plants, then probably top them sometime later, after they've drank their fill.DrBudGreengenes said:Well first ya take one outta the Cab
Then you put it in the bucket.....
Then fill bucket to 1/4" above soil line with Nute mix
When the Bubbles stop....wait 1 more min then drain and replace in cab
That should cover it eh...
I just fed them with a new recipe today, instead of PBP and LK, I used 6ml FloraMicro and 9ml of FloraBloom, at 6.0PH. This new recipe has almost twice as much N, so we'll see how they respond. I think I'll top them in about 6 hours and then throw those right into 12/12 to figure out sex asap.
Last edited:
Huggie bear
Active member
I saw Sour Diesels on Seedbo and didn't pick them up I am so kicking myself after reading all the love for that strain..
How often are you doing that soaking routine?
How often are you doing that soaking routine?
By the soaking routine I think you mean the submerge watering I do? I'd say it's a split between how the plants are looking and how light the cups are. I watered them all this morning and topped them
I'm not going to show any pictures of the clones I'm sexing until they've sexed, I don't know if what I'm doing is going to work so I'm going to hold off on that. Either way, in a week or two I'll let everyone know and post some pics of how it went.
I didn't top the Blockead, I'm just going to let that one do it's thing and try to treat it nice, hopefully it'll grow a little more vigorously. It's my only chance at having Blockhead so I'm really rooting for it. It looks really healthy, just stunted. We'll see how she goes.
I'm not going to show any pictures of the clones I'm sexing until they've sexed, I don't know if what I'm doing is going to work so I'm going to hold off on that. Either way, in a week or two I'll let everyone know and post some pics of how it went.
I didn't top the Blockead, I'm just going to let that one do it's thing and try to treat it nice, hopefully it'll grow a little more vigorously. It's my only chance at having Blockhead so I'm really rooting for it. It looks really healthy, just stunted. We'll see how she goes.
Last edited:
Huggie bear
Active member
Snagged the avatar from you hope you don't mind.
Huggie bear
Active member
OK lets see some pics of the kids..
PoP3yE
New member
any info is good info
any info is good info
hey bounty, luvin the grow so far man,
any way you could talk some more about how you put together your watering setup and how you built your cab?
dont know if you have a construction thread i can look at if so srry for the time waste, a link would b greatly appreciated
any info is good info
hey bounty, luvin the grow so far man,
any way you could talk some more about how you put together your watering setup and how you built your cab?dont know if you have a construction thread i can look at if so srry for the time waste, a link would b greatly appreciated
Well the veg cab is just about empty right now, all I've got in there are two SD seedlings, one of the MaT plants, the Blockhead, and some shrooms. I put the other four MaT plants into the flower cab a couple days ago, and they're under 24 hours of light for a little while, until I see some new growth, then I'll switch them to 12/12. I'll try and get some pics up today.
PoP3yE - Which watering setup do you mean? The cab was pretty easy to set up. I first cut the holes I needed, one on the bottom of the left side panel, an 8"x8" square for my light trap, and the top of the right side, about 4.5"x9" for my two PC fan exhaust. I then put the cabinet together as per instructions. I then added the light sockets and wiring, the carbon filter, and weatherstripping along the door. That's about it, just took it one step at a time and it came out really well.
PoP3yE - Which watering setup do you mean? The cab was pretty easy to set up. I first cut the holes I needed, one on the bottom of the left side panel, an 8"x8" square for my light trap, and the top of the right side, about 4.5"x9" for my two PC fan exhaust. I then put the cabinet together as per instructions. I then added the light sockets and wiring, the carbon filter, and weatherstripping along the door. That's about it, just took it one step at a time and it came out really well.
Huggie bear
Active member
how soon after topping did you put them under the bloom light?
Hey man, plants are looking sweet. Looking forward to the flip.
B/R
B/R
