Diary padre sereno garden

[hazepadano]

box 120x240
cocco perlite
sx 100x100 300 watt 30 piante vaso 2,4 litri
dx 140x120 400 watt mh/600 watt hps 26 piante vaso 6,5 litri
sx 11 sett 12/12
dx 2 sett 12/12

good morning I am a peaceful father.
I grow in coconut.
I would like to share my garden here too.
i speak very bad english i will use and i am not very familiar with the forum. I hope not to have the wrong section and to be able to interact with you

L'oratorio di padre sereno led experience marshydro fce-3000 1mq sog

Buongiorno coltivatori! apro un nuovo topic per questa esperienza che vorrei condividere con voi, mi raccomando urgono consigli e dritte che coi led son niubbone. setup: box 100x100 marshydro luce fce-3000 marshydro estrattore 150 centrifugo con dimmer filtro umidificatore ultrasuoni...

www.icmag.com

Padre Sereno Garden

sub terra indor vegetazione 1 - ex teca tartarughe, autocostruita, rifiniture di pregio 40x50x50. luce 1 x cfl 50 watt 2 - box ricavato sotto uno scaffale 110x60x90 luce 2 x cfl 125 watt fioritura box SJ dr 90 90x90x180 luce hps 600w riflettore aw con cooltube estrattore tt125 entrata...

www.icmag.com

 

[hazepadano]

I started to pot the new plants. are 40 in 1 liter jar.
I leave them for a few days under a few watt LEDs in this 100x50 tent. as soon as I empty the 100x100 I will insert these which will then bloom under fc e4800 in 120x120

 

[exploziv]

Looking good man! Don't worry, you are sharing your grow in the perfect place!

 

[hazepadano]

I start to cut the 100x100 under fce3000.
I'm curious about the weighing.
I sn found very well with I'm led and I decided to take a fc 4800.
I'm undecided whether to use it in 100x100 or 120x120.

 

[hazepadano]

hello, news!
the new lamp arrived this morning.
marshydro fc 4800.
guys, how beautiful!
I didn't expect it to be so "big".
I just opened the package.
I am busy cutting, as soon as I finish I post the photos of the hps 600 watt box which is between the third and fourth.
not or whether to replace the hps with this led or whether to start a new round vegetating with the fce 3000 (300 watts) in 100x100 and flourish with the fc 4800 in 120x120

 

[DARKSIDER]

I started to pot the new plants. are 40 in 1 liter jar.
I leave them for a few days under a few watt LEDs in this 100x50 tent. as soon as I empty the 100x100 I will insert these which will then bloom under fc e4800 i

 

[GMT]

I'm just going to park myself over here, and watch.

 

[hazepadano]

welcome gtm!
the new lamp arrived I tried to mount it and turn it on, it looks very nice.
after the cut in days we start.

 

[AmanteSativo]

I start to cut the 100x100 under fce3000.
I'm curious about the weighing.
I sn found very well with I'm led and I decided to take a fc 4800.
I'm undecided whether to use it in 100x100 or 120x120.

I never see so many resin!
Great job and great photos!

 

[hazepadano]

photo box 120x120 under hps 600 watts four weeks after the hour change, lights off.
I would be tempted to put them under 4800 fc but, I fear it is not a garden suitable for that type of light

 

[hazepadano]

lights on

 

[hazepadano]

dried the 100x100 300 watts 460 grams.
beaten trim

 

[AmanteSativo]

Great job!

 

[hazepadano]

hello coconut growers!
I planted the marshydro fce3000 lamp.
I modified it by dividing it in half (I sawed it!) and modifying the wiring.
now i have 2 of 150 watts in 2 of 100x50x90.

 

[hazepadano]

I emptied the nursery.
I put 12 glueberry in a 2.4 liter pot, now in the 100x100 under FC 4800 to vegetate, the others cleaned and put under FC e3000 (post above). on the shelf 4 new mothers also in 2.4 liters

 

[hazepadano]

photographic update ... in the hps side we are at the beginning of the fifth, plants left in the wild (I did some croppaggi in extension).
led side I mounted the fc 4800, underneath there are 12 glueberry (and an abusive mother) in a 2.4 liter pot

 

[hazepadano]

after 10 days the plants seem to me beautiful in shape, I have not yet touched anything, lamp always in the same position (the plants have risen almost 10 cm) always 50% power.

 

[hazepadano]

noticed the shoes were getting tight I racked in 6.5 liters and pruned. I patched and cleaned low branches. having a slightly leafy genetics I followed the example of halogen and I cut the leaves without detaching them. the aim was to reduce transpiration, improve the flow of air and also properly illuminate the secondary branches (having patched).
some photos before and after pruning and decanting

 

[hazepadano]

the box at the moment, lamp always at 50%
the sticks are 90 cm high

 

[hazepadano]

forward on the left the more attentive will have identified a mother in education