Cloning soloutions in bubble cloners? - Indoor Grows - Hydro - International Cannagraphic Magazine Forums

Harry Gypsna · 11-18-2004, 07:18 PM

Hi, i am just wondering ppl, does it make any difference when using a small bubble cloner, to use a cloning soloution in the water or dilute some clonex in2 it? Or would it cause more problems (although i cant think what?) I am just wonderin this because i need to clone a flowering female, i desperately want to keep this plant in clone form, and i am going to use the bubble cloner on them, should i add the clonex, or buy something, or should i just use water? thanks.

11-18-2004, 08:34 PM

I use just water. no treatements.

Avid

Harry Gypsna · 11-19-2004, 10:15 PM

Any1 else? The reason i ask is it took about 4 weeks to root in this last time, so would some clonex diluted in the water speed it up some?? Any1 done this?

11-19-2004, 10:19 PM

Water takes a bit longer, but works well.

If you insist on using the Clonex dip the cut once and it will dissipate in the water. I wouldn't add any to the water itself.

noel · 11-21-2004, 11:13 PM

Quote:

Originally Posted by Harry Gypsna

Hi, i am just wondering ppl, does it make any difference when using a small bubble cloner, to use a cloning soloution in the water or dilute some clonex in2 it? Or would it cause more problems (although i cant think what?) I am just wonderin this because i need to clone a flowering female, i desperately want to keep this plant in clone form, and i am going to use the bubble cloner on them, should i add the clonex, or buy something, or should i just use water? thanks.

NO YOU DONT.ITS A NO NO.JUST USE PLAN WATER AND WAIT..10 DAYS TOPS

Harry Gypsna · 11-22-2004, 12:47 AM

Hi noel, nice to meet another uk grower, u say 10 days tops, well it took 4 weeks last time m8, in the same cloner, i do it in 2 with soil/perlite mix and clonex, i only got the bubbl cloner out because i am trying to root at least 1 clone from a plant i have flowering, they were taken 4 and a half weeks in2 flower, so i thought the bubbler might be the best bet. I am eventually going to build an aero-cloner coz taking 25 cuttings and doing the whole pin pricking, and clonex dip, is a lot of work, lol(im naturally quite lazy)

00420 · 11-24-2004, 09:08 AM

i use just water. i used to use roottech on my stems but found that it along with the water being to hot 80°+ has to do with stem mush

the reason you roots are taking so long is do to the water being to cold. under 70°

i find that 73-78 are best for a water temp. i do use a lil b-1 (superthrive)

i pull root's in 3-7 day strain has a lot to do with it.

allso if its was taken off a flowering plant it might take a lil longer.
sum do sum dont.

heres a silverhaze 4 days from cutting

you will see 2 clones one with roots one with out.

i still dont know why.
they both where cut the same day. from same plant around the same place.

Harry Gypsna · 11-24-2004, 08:31 PM

right, ill see how much a fishtank heater will be, i spose if im buying a heater, i may as well buy a better pump, and make a bigger one.

Dr. D · 11-24-2004, 08:43 PM

Try using a root stimulator b,cuzz or bio-bizz this should help speed it up

00420 · 11-25-2004, 08:13 AM

Quote:

Originally Posted by Harry Gypsna

right, ill see how much a fishtank heater will be, i spose if im buying a heater, i may as well buy a better pump, and make a bigger one.

get a lil temp meter as well there only like 2.99 to chekc you temp.
you might not need a heater. and it could have been that strain...

11-18-2004, 07:18 PM	#1
Harry Gypsna Dirty hippy Bastard Join Date: May 2004 Location: Outside BodyShop, with a Tin Whistle and a dog on a piece of string Posts: 8,157	Cloning soloutions in bubble cloners? Hi, i am just wondering ppl, does it make any difference when using a small bubble cloner, to use a cloning soloution in the water or dilute some clonex in2 it? Or would it cause more problems (although i cant think what?) I am just wonderin this because i need to clone a flowering female, i desperately want to keep this plant in clone form, and i am going to use the bubble cloner on them, should i add the clonex, or buy something, or should i just use water? thanks. __________________ Clowns to the left of me, jokers to the right, and none of these people are very funny.
	Quote

11-19-2004, 10:15 PM	#3
Harry Gypsna Dirty hippy Bastard Join Date: May 2004 Location: Outside BodyShop, with a Tin Whistle and a dog on a piece of string Posts: 8,157	Any1 else? The reason i ask is it took about 4 weeks to root in this last time, so would some clonex diluted in the water speed it up some?? Any1 done this? __________________ Clowns to the left of me, jokers to the right, and none of these people are very funny.
	Quote

11-22-2004, 12:47 AM	#6
Harry Gypsna Dirty hippy Bastard Join Date: May 2004 Location: Outside BodyShop, with a Tin Whistle and a dog on a piece of string Posts: 8,157	Hi noel, nice to meet another uk grower, u say 10 days tops, well it took 4 weeks last time m8, in the same cloner, i do it in 2 with soil/perlite mix and clonex, i only got the bubbl cloner out because i am trying to root at least 1 clone from a plant i have flowering, they were taken 4 and a half weeks in2 flower, so i thought the bubbler might be the best bet. I am eventually going to build an aero-cloner coz taking 25 cuttings and doing the whole pin pricking, and clonex dip, is a lot of work, lol(im naturally quite lazy) __________________ Clowns to the left of me, jokers to the right, and none of these people are very funny.
	Quote

11-24-2004, 09:08 AM	#7
00420 full time daddy Join Date: Jul 2004 Posts: 3,148	i use just water. i used to use roottech on my stems but found that it along with the water being to hot 80°+ has to do with stem mush the reason you roots are taking so long is do to the water being to cold. under 70° i find that 73-78 are best for a water temp. i do use a lil b-1 (superthrive) i pull root's in 3-7 day strain has a lot to do with it. allso if its was taken off a flowering plant it might take a lil longer. sum do sum dont. heres a silverhaze 4 days from cutting you will see 2 clones one with roots one with out. i still dont know why. they both where cut the same day. from same plant around the same place. __________________ [00420]positive side [tokinsmokin] WOW how the hell do u know this [00420] [tokinsmokin]ur blowing my mind here dude this is some fuckin technical shit ur tellin me [00420] done?> [tokinsmokin]alright ur a genius [tokinsmokin]u kind of scare me here man, u answer pretty much every question i've had so far and not only answer it but answer it with the correct answer
	Quote

11-24-2004, 08:31 PM	#8
Harry Gypsna Dirty hippy Bastard Join Date: May 2004 Location: Outside BodyShop, with a Tin Whistle and a dog on a piece of string Posts: 8,157	right, ill see how much a fishtank heater will be, i spose if im buying a heater, i may as well buy a better pump, and make a bigger one. __________________ Clowns to the left of me, jokers to the right, and none of these people are very funny.
	Quote

11-18-2004, 08:34 PM	#2
Guest Guest Posts: n/a	I use just water. no treatements. Avid
	Quote

11-19-2004, 10:19 PM	#4
Guest Guest Posts: n/a	Water takes a bit longer, but works well. If you insist on using the Clonex dip the cut once and it will dissipate in the water. I wouldn't add any to the water itself.
	Quote

11-24-2004, 08:43 PM	#9
Dr. D Senior Member Join Date: Sep 2004 Location: Looking for Shambhala.. Posts: 3,179	wasup Harry Try using a root stimulator b,cuzz or bio-bizz this should help speed it up __________________ Roots.....its all in the roots!!! To fathom hell or soar angelic Just take a pinch of psychedelic Humphrey Osmond
	Quote