Bcuzz Bloom? - Indoor Grows - Hydro - International Cannagraphic Magazine Forums

BenitoCereno · 10-12-2004, 04:05 AM

Has anyone used this stuff in conjunction with GH 3-part?

My lastest grow I am trying to keep simple, I have been just using GH flora series but now I need a bloom enhancer.

I didn't want to use KoolBloom because I sisn't what to just go the phosphorus overload route...so I was sold on B'cuzz Bloom at the grow store. But now that I get it home I see on the label that it says "avoid the use of synthetic additives while using B'cuzz."

I think I'm O.K. does anyone think this stuff will bind with the GH and clump up or godforbid cause lockouts?

BenitoCereno · 10-12-2004, 07:57 AM

O.K. a bit impulsive of me but I couldn't wait for a response I put some in at half strength.

Hooked-On-Grown · 10-12-2004, 08:22 AM

BenitoCereno..... hey bro....
Was loking around and xould not find anything that said it would be harmful or have a negative reaction. Good to go half strength....... I would add your GH nutes first then wait a few minutes so it can circu;ate in res then add the B'Cuzz.

I found when I mixed in my Floralicious too soon with my nutes it caused it to foam a little and sludge on bottom and in circulation pump.

Let us know......

BenitoCereno · 10-12-2004, 09:54 AM

Thanks hooked.

I will let you know. I will make this a little B'cuzz bloom thread and maybe post some pictures if all is well.

This grow is exciting for me, I am about three days away from getting my new light. My shop was out and they placed an order and it is enroute A 430watt hps. Dude, this is a big step up from me, I've been using envirolites for a little over a year.

BenitoCereno · 10-18-2004, 09:35 AM

I have been using Bcuzz Bloom for almost a week now and I am please with the bud boosting, basically I have gone from no buds, just a few white hairs to actual formed colas in like 5 days with this stuff.

One thing though. I have been using relatively low strength GH 3 part nutes like 600 ppm because I usually burn my plants and I wanted to see if minor deficiencies are better than burn...anyway, I changed my rez yesterday and added nutes and B'cuzz today ppms read like 400...

Is it possible that the B'cuzz is causing nutrient effeciency to multiply so that the plants are axtually sucking the ppms out of the nutes?

Hooked-On-Grown · 10-18-2004, 10:33 AM

If your PPm dropped that means your plants are hungry and looking for more food. If your PPM rises, it means your plants have taken what they need and are not taking up anymore so you dilute with ph balanced water.
I would boost the PPM way up.......what day are you on? They should be at around at least 600ppm I would think.

BenitoCereno · 10-18-2004, 12:08 PM

Today is day 14.

I know my PPMs were low for a long time but I had been trying to do GH at half strength. Now it looks like I need to go over recommended dosage to get to an acceptable level... I am wondering If I should just dump anothoer teaspoon per gallon of Micro and Bloom just to bring up the PPM.

I.M. Boggled · 10-18-2004, 07:36 PM

With fresh water, add Micro first, mix thoroughly, then add your Gro or Bloom.
Mixing grow&/or bloom first before adding the micronutrient will cause nutrient lock up, making important nutes unavailable to your plants.
The act of tossing additional G.H. micronutrient into an existing nutrient solution will also cause a reaction/ lock-out.

Good luck with dem buds

Quote:

Is it possible that the B'cuzz is causing nutrient effeciency to multiply so that the plants are axtually sucking the ppms out of the nutes?

I wouldn't be suprised if that were the case, increased nutrient absorption,
as a side effect of the B'cuzz bloom enhancer. I don't know what the goodies are in that product is that makes it work so well, but they're definitely on to something.The product has a good reputation.
I have found that Botanicare's "Liquid Karma" causes that kind of an increased nutrient absorbtion to readily occur also. Plants dig it.

BenitoCereno · 10-19-2004, 04:51 AM

Thanks for lookin out Boggled...

I guess I am just going to add some bloom to my solution and stay away from the micro for now, thanks.

BenitoCereno · 10-22-2004, 01:21 AM

Check this out!

I have been using the B'cuzz Bloom for like 10 days now.

I changed rez do to the nutrient absorbtion ability of this strain, GH and B'cuzz. I hab been running half strength about 600PPM

I drained and uped it to just a wee bit under full strength. It cam out to 1200PPM.

That was 16 hours ago.

I just checked my PPMs. About a gallon of sollution was missing and PPm were down to 750.

Holy CRap!!!!! Those are some hungry plants.

10-12-2004, 04:05 AM	#1
BenitoCereno Self-Hating Gnostic Join Date: Feb 2004 Location: On the far left end of the couch, shaving my cat... Posts: 490	Bcuzz Bloom? Has anyone used this stuff in conjunction with GH 3-part? My lastest grow I am trying to keep simple, I have been just using GH flora series but now I need a bloom enhancer. I didn't want to use KoolBloom because I sisn't what to just go the phosphorus overload route...so I was sold on B'cuzz Bloom at the grow store. But now that I get it home I see on the label that it says "avoid the use of synthetic additives while using B'cuzz." I think I'm O.K. does anyone think this stuff will bind with the GH and clump up or godforbid cause lockouts?
	Quote

10-18-2004, 09:35 AM	#5
BenitoCereno Self-Hating Gnostic Join Date: Feb 2004 Location: On the far left end of the couch, shaving my cat... Posts: 490	Strange thing happening I have been using Bcuzz Bloom for almost a week now and I am please with the bud boosting, basically I have gone from no buds, just a few white hairs to actual formed colas in like 5 days with this stuff. One thing though. I have been using relatively low strength GH 3 part nutes like 600 ppm because I usually burn my plants and I wanted to see if minor deficiencies are better than burn...anyway, I changed my rez yesterday and added nutes and B'cuzz today ppms read like 400... Is it possible that the B'cuzz is causing nutrient effeciency to multiply so that the plants are axtually sucking the ppms out of the nutes?
	Quote

10-19-2004, 04:51 AM	#9
BenitoCereno Self-Hating Gnostic Join Date: Feb 2004 Location: On the far left end of the couch, shaving my cat... Posts: 490	Hmmmmm Thanks for lookin out Boggled... I guess I am just going to add some bloom to my solution and stay away from the micro for now, thanks.
	Quote

10-12-2004, 07:57 AM	#2
BenitoCereno Self-Hating Gnostic Join Date: Feb 2004 Location: On the far left end of the couch, shaving my cat... Posts: 490	O.K. a bit impulsive of me but I couldn't wait for a response I put some in at half strength.
	Quote

10-12-2004, 08:22 AM	#3
Hooked-On-Grown Banned Join Date: Mar 2004 Location: I'm in here.....somewhere... Posts: 2,158	BenitoCereno..... hey bro.... Was loking around and xould not find anything that said it would be harmful or have a negative reaction. Good to go half strength....... I would add your GH nutes first then wait a few minutes so it can circu;ate in res then add the B'Cuzz. I found when I mixed in my Floralicious too soon with my nutes it caused it to foam a little and sludge on bottom and in circulation pump. Let us know......
	Quote

10-12-2004, 09:54 AM	#4
BenitoCereno Self-Hating Gnostic Join Date: Feb 2004 Location: On the far left end of the couch, shaving my cat... Posts: 490	Thanks hooked. I will let you know. I will make this a little B'cuzz bloom thread and maybe post some pictures if all is well. This grow is exciting for me, I am about three days away from getting my new light. My shop was out and they placed an order and it is enroute A 430watt hps. Dude, this is a big step up from me, I've been using envirolites for a little over a year.
	Quote

10-18-2004, 10:33 AM	#6
Hooked-On-Grown Banned Join Date: Mar 2004 Location: I'm in here.....somewhere... Posts: 2,158	If your PPm dropped that means your plants are hungry and looking for more food. If your PPM rises, it means your plants have taken what they need and are not taking up anymore so you dilute with ph balanced water. I would boost the PPM way up.......what day are you on? They should be at around at least 600ppm I would think.
	Quote

10-18-2004, 12:08 PM	#7
BenitoCereno Self-Hating Gnostic Join Date: Feb 2004 Location: On the far left end of the couch, shaving my cat... Posts: 490	Today is day 14. I know my PPMs were low for a long time but I had been trying to do GH at half strength. Now it looks like I need to go over recommended dosage to get to an acceptable level... I am wondering If I should just dump anothoer teaspoon per gallon of Micro and Bloom just to bring up the PPM.
	Quote

10-22-2004, 01:21 AM	#10
BenitoCereno Self-Hating Gnostic Join Date: Feb 2004 Location: On the far left end of the couch, shaving my cat... Posts: 490	Check this out! I have been using the B'cuzz Bloom for like 10 days now. I changed rez do to the nutrient absorbtion ability of this strain, GH and B'cuzz. I hab been running half strength about 600PPM I drained and uped it to just a wee bit under full strength. It cam out to 1200PPM. That was 16 hours ago. I just checked my PPMs. About a gallon of sollution was missing and PPm were down to 750. Holy CRap!!!!! Those are some hungry plants.
	Quote