THE ULTIMATE PERSONAL PROFESSIONAL HASH PRESS FOR UNDER 20 BUCKS !! - Page 5 - Hashish - International Cannagraphic Magazine Forums

Guest423 · 02-10-2007, 02:16 AM

nice find, that is killer, i'd probably throw in the extra few bucks and get the stainless one, looks more beefy.

Pipedream · 02-11-2007, 06:34 PM

Hey all,

Been away for a few days. Glad to see you are keeping the thread active and offering up some ideas as well. I wish I had known they made one from SS when I came up with this idea, I might of held out for it. However, $15 bucks for the amount I'll use it is hard to beat. I'm curious though, does anyone know the dimensions of the SS model?

I'll be doing a bit more pressing in the next week or so and I'll be sure to post my results. I hope you will do the same.

(edit) OK, I did a bit of research, and it turns out that the SS model is only available on-line. For now, Makin's is exclusively marketing it thru wwwpmcsupplycom (insert appropriate dots). As stated, its $49.95. Of course they do offer free shipping for orders over 50 bucks, and there is a surcharge for Alaska, Hawaii, & Canada

Regards to all, PD

Kaibe · 02-11-2007, 07:00 PM

Pipedream- The diameter is the same for both units but the stainless steel unit's barrel is about half as long as the aluminum one, 3" and 5 1/2" respectively. The stainless steel unit is the right size for pucks (don't know why anyone would want to make a 5" tootsie roll plug of hash) and it fits into a stash box compartment well.

Pipedream · 02-12-2007, 07:26 AM

Kaibe, Did you get yours online from PMC, or were you able to locate it elsewhere? What was the actual cost if different than the list of $49.95, and how about shipping if you did get it thru the mail? Have you used it yet? I'm guessing its much stronger. Any and all info is greatly appreciated.

Kaibe · 02-12-2007, 03:40 PM

Pipedream- Got it from PMC via USPS Priority mail. $49.95 plus$5 shipping. Got it 3 day after I ordered it online. It's well-built (thicker threads in the cap where the screw twists through); it would be hard to break by over-tightening. PMC even sent a $5 coupon for my next order, not sure if they ship out of the US.

SUNSIMULATOR+ · 02-12-2007, 03:48 PM

thats a nice press!!! very good ability to adapt!!!overcome !!

sugabear_II · 02-13-2007, 07:53 AM

I'm really likeing the stainless model ...

here's some hash pucks I have made and been nibblin on back two right top are brand new. as you can see I've been doing little designs in there with some of the different molds - I hit the top with a lighter to seal a bit more and browned the teardrop one...

sugabear_II · 02-15-2007, 01:54 AM

a few more pics from a new puck I made today.

captain bigbud · 02-27-2007, 07:01 AM

way cool got to get me one

beaner · 02-27-2007, 04:31 PM

Thanks for the great idea, picking one of these up to make some hash from my first harvest!

02-10-2007, 02:16 AM	#41
Guest423 Banned Join Date: Feb 2006 Posts: 3,304	nice find, that is killer, i'd probably throw in the extra few bucks and get the stainless one, looks more beefy.
	Quote

02-11-2007, 06:34 PM	#42
Pipedream Proudly Growing My Own Since 1969 Join Date: Feb 2006 Posts: 759	Hey all, Been away for a few days. Glad to see you are keeping the thread active and offering up some ideas as well. I wish I had known they made one from SS when I came up with this idea, I might of held out for it. However, $15 bucks for the amount I'll use it is hard to beat. I'm curious though, does anyone know the dimensions of the SS model? I'll be doing a bit more pressing in the next week or so and I'll be sure to post my results. I hope you will do the same. (edit) OK, I did a bit of research, and it turns out that the SS model is only available on-line. For now, Makin's is exclusively marketing it thru wwwpmcsupplycom (insert appropriate dots). As stated, its $49.95. Of course they do offer free shipping for orders over 50 bucks, and there is a surcharge for Alaska, Hawaii, & Canada Regards to all, PD __________________ *"I was so much older then, I'm younger than that now"* Link To: Pipedream's 150w Tiny Bubbler System Link To: The Ultimate Hash Press Under $20 Last edited by Pipedream; 02-11-2007 at 06:58 PM..
	Quote

02-11-2007, 07:00 PM	#43
Kaibe New Member Join Date: Nov 2006 Posts: 4	Pipedream- The diameter is the same for both units but the stainless steel unit's barrel is about half as long as the aluminum one, 3" and 5 1/2" respectively. The stainless steel unit is the right size for pucks (don't know why anyone would want to make a 5" tootsie roll plug of hash) and it fits into a stash box compartment well. Last edited by Kaibe; 02-12-2007 at 01:08 AM..
	Quote

02-12-2007, 07:26 AM	#44
Pipedream Proudly Growing My Own Since 1969 Join Date: Feb 2006 Posts: 759	Kaibe, Did you get yours online from PMC, or were you able to locate it elsewhere? What was the actual cost if different than the list of $49.95, and how about shipping if you did get it thru the mail? Have you used it yet? I'm guessing its much stronger. Any and all info is greatly appreciated. __________________ *"I was so much older then, I'm younger than that now"* Link To: Pipedream's 150w Tiny Bubbler System Link To: The Ultimate Hash Press Under $20
	Quote

02-12-2007, 03:40 PM	#45
Kaibe New Member Join Date: Nov 2006 Posts: 4	Pipedream- Got it from PMC via USPS Priority mail. $49.95 plus$5 shipping. Got it 3 day after I ordered it online. It's well-built (thicker threads in the cap where the screw twists through); it would be hard to break by over-tightening. PMC even sent a $5 coupon for my next order, not sure if they ship out of the US.
	Quote

02-12-2007, 03:48 PM	#46
SUNSIMULATOR+ Banned Join Date: Dec 2006 Posts: 228	thats a nice press!!! very good ability to adapt!!!overcome !!
	Quote

02-13-2007, 07:53 AM	#47
sugabear_II Senior Member Join Date: Mar 2006 Location: gone phishin Posts: 1,051	I'm really likeing the stainless model ... here's some hash pucks I have made and been nibblin on back two right top are brand new. as you can see I've been doing little designs in there with some of the different molds - I hit the top with a lighter to seal a bit more and browned the teardrop one... __________________ [glow=green]150HPS club(click here)[/glow]Converting a security lamp to a remote ballasted grow light(click here) SugaBear's Den(click here) ICMAG'S OFFICIAL ~DIY~ LINK-O-RAMA (bookmark this) medical user in protest of my states lack of compassion
	Quote

02-15-2007, 01:54 AM	#48
sugabear_II Senior Member Join Date: Mar 2006 Location: gone phishin Posts: 1,051	a few more pics from a new puck I made today. __________________ [glow=green]150HPS club(click here)[/glow]Converting a security lamp to a remote ballasted grow light(click here) SugaBear's Den(click here) ICMAG'S OFFICIAL ~DIY~ LINK-O-RAMA (bookmark this) medical user in protest of my states lack of compassion
	Quote

02-27-2007, 07:01 AM	#49
captain bigbud Member Join Date: Apr 2006 Posts: 36	way cool got to get me one
	Quote

02-27-2007, 04:31 PM	#50
beaner jerk Join Date: Jan 2004 Location: sunshine Posts: 115	Thanks for the great idea, picking one of these up to make some hash from my first harvest!
	Quote