DIY Aero Cloner the EZ-Cloner Replica in 10 Easy Steps! - Page 15 - Indoor Grows - Hydro - International Cannagraphic Magazine Forums

Bonzo · 04-20-2007, 10:42 AM

hey pipedream, nice job! where did you get those lil green "cups" that the puck sits in?

StealthSniper · 04-21-2007, 08:10 AM

Hey King Ralph, awesome tutorial, thanks for that! Cloning has never been so simple.

On a scale of 1 - 10 with ten being the most difficult, building this DIY project was a 2...

Here's a couple pics from start to finish, and my first cloning attempt:

2 Velcro straps to pull the lid down for a good seal, in order to make it leak proof:

100% Success rate for roots!!

Transplanted into soil:

Pipedream · 04-23-2007, 06:28 AM

Bonzo, They are the top half of bottom piece of baby training cups, also known as sippies. Got them at the local Dollar Store. 6 for one buck!

You can see the packaging and other part in this pic if you look at it full size.

04-23-2007, 06:43 AM

Way cool, that's what i love about us cannabis grower's. We come up with some of the greatest idea's. I would have never guessed baby trainer cups. That would have saved me some money on the net pots and foam ez cloner tops. My next unit will be the same setup. Dollar store, her i come.lolol Thanks for sharing the info everyone. I love the thread and think it's just awesome.
Later,
BG

04-23-2007, 06:45 AM

Quote:

Originally Posted by Pipedream

Bonzo, They are the top half of bottom piece of baby training cups, also known as sippies. Got them at the local Dollar Store. 6 for one buck!

You can see the packaging and other part in this pic if you look at it full size.

Hey Pipedream, forgot to ask you. What size Whole Saw did you use to cut your holes in the tub lid?
Thanks,
BG

Pipedream · 04-23-2007, 06:56 AM

I used a 3-inch hole saw, plus I left them a bit apart. I wanted the sites to be larger than usual so that I could grow my clones a bit bigger before moveing them into their final containers. They'll go from here directly into flower. I used the same saw for both the holes in the lid and the foam pucks. Of course, any size will work as long as you find the right size drinking cup to fill the difference between the hole and the puck.

Sloppy Seconds · 04-24-2007, 09:35 PM

Quick question, how do you get air into the tub for the roots? do you use as air pump? is there enough air already inside to keep roots happy?
thanks for the help. be cool

Bonzo · 04-25-2007, 12:34 AM

Thank you Pipe and BG! DIYin' at its finest!!!!

peace

bonz

>>>>>>>>>>>>>>>>>>>>>>Nam myoho renge kyo!!!!>>>>>>>>>>>>>>>>>>>>>>> >

dbcooper · 04-25-2007, 01:02 AM

Anyone try using a rainforest vortex spayer? my rainforest is awesome just don't have many holes for clones, thinkin of makin a rubbermaid version and using my motor in it.

Pipedream · 04-25-2007, 06:16 AM

Yes, I'm using a small pump and airstone to add air for the roots. I found that if you don't, the water can create a good seal around the top and all holes and allow little air to enter. I have it terminated under the water level in a single stone.

04-20-2007, 10:42 AM	#141
Bonzo Member Join Date: Sep 2004 Location: not quite sure Posts: 4,008	hey pipedream, nice job! where did you get those lil green "cups" that the puck sits in? __________________ Bonzo BoUnCeS back... FREEDOM for BONZ "When one objectively acknowledges, accepts, and embraces one's weaknesses; they in fact, no longer continue to be that."(PTD)
	Quote

04-21-2007, 08:10 AM	#142
StealthSniper Member Join Date: Mar 2006 Location: Earth Creature Posts: 190	Hey King Ralph, awesome tutorial, thanks for that! Cloning has never been so simple. On a scale of 1 - 10 with ten being the most difficult, building this DIY project was a 2... Here's a couple pics from start to finish, and my first cloning attempt: 2 Velcro straps to pull the lid down for a good seal, in order to make it leak proof: 100% Success rate for roots!! Transplanted into soil: __________________ ********************** 8KW Grow Room Construction & Kush Grow! DIY 60 Site Aero Cloner & First Cloning Attempt Where I get everything I need Grow Related! **********************
	Quote 2 members found this post helpful.

04-23-2007, 06:28 AM	#143
Pipedream Proudly Growing My Own Since 1969 Join Date: Feb 2006 Posts: 759	Bonzo, They are the top half of bottom piece of baby training cups, also known as sippies. Got them at the local Dollar Store. 6 for one buck! You can see the packaging and other part in this pic if you look at it full size. __________________ *"I was so much older then, I'm younger than that now"* Link To: Pipedream's 150w Tiny Bubbler System Link To: The Ultimate Hash Press Under $20 Last edited by Pipedream; 04-23-2007 at 06:30 AM..
	Quote

04-23-2007, 06:56 AM	#146
Pipedream Proudly Growing My Own Since 1969 Join Date: Feb 2006 Posts: 759	I used a 3-inch hole saw, plus I left them a bit apart. I wanted the sites to be larger than usual so that I could grow my clones a bit bigger before moveing them into their final containers. They'll go from here directly into flower. I used the same saw for both the holes in the lid and the foam pucks. Of course, any size will work as long as you find the right size drinking cup to fill the difference between the hole and the puck. __________________ *"I was so much older then, I'm younger than that now"* Link To: Pipedream's 150w Tiny Bubbler System Link To: The Ultimate Hash Press Under $20 Last edited by Pipedream; 04-23-2007 at 06:58 AM..
	Quote

04-24-2007, 09:35 PM	#147
Sloppy Seconds Outlawed Join Date: Aug 2006 Posts: 283	Quick question, how do you get air into the tub for the roots? do you use as air pump? is there enough air already inside to keep roots happy? thanks for the help. be cool __________________ OG Refugee
	Quote

04-23-2007, 06:43 AM	#144
Guest Guest Posts: n/a	Way cool, that's what i love about us cannabis grower's. We come up with some of the greatest idea's. I would have never guessed baby trainer cups. That would have saved me some money on the net pots and foam ez cloner tops. My next unit will be the same setup. Dollar store, her i come.lolol Thanks for sharing the info everyone. I love the thread and think it's just awesome. Later, BG
	Quote

04-25-2007, 12:34 AM	#148
Bonzo Member Join Date: Sep 2004 Location: not quite sure Posts: 4,008	Thank you Pipe and BG! DIYin' at its finest!!!! peace bonz >>>>>>>>>>>>>>>>>>>>>>Nam myoho renge kyo!!!!>>>>>>>>>>>>>>>>>>>>>>> > __________________ Bonzo BoUnCeS back... FREEDOM for BONZ "When one objectively acknowledges, accepts, and embraces one's weaknesses; they in fact, no longer continue to be that."(PTD)
	Quote

04-25-2007, 01:02 AM	#149
dbcooper Member Join Date: Mar 2007 Posts: 69	Anyone try using a rainforest vortex spayer? my rainforest is awesome just don't have many holes for clones, thinkin of makin a rubbermaid version and using my motor in it.
	Quote

04-25-2007, 06:16 AM	#150
Pipedream Proudly Growing My Own Since 1969 Join Date: Feb 2006 Posts: 759	Yes, I'm using a small pump and airstone to add air for the roots. I found that if you don't, the water can create a good seal around the top and all holes and allow little air to enter. I have it terminated under the water level in a single stone. __________________ *"I was so much older then, I'm younger than that now"* Link To: Pipedream's 150w Tiny Bubbler System Link To: The Ultimate Hash Press Under $20
	Quote