So you want to make easy safe hash oil with everclear?

Jammal · May 22, 2019

I'm fixing to make a batch tomorrow and getting everything together I need to make QWET I believe they call it...

Any fuk who's this is how I do it....I only run buds,,, Trim is just not worth my efforts for anything.

Will work out my list of stuff,,,but you can guess by pics...

I'll do my best ,only one set of hands.

Mind you,,,I might be missing a few things,,,but I think I really got it all here.

I won't need all this bud, but all 4 of the pint Mason jars 3/4 full of ground buds....and 90% of the booze...

The bong / dab tools and stereo are must haves.

clearheaded · May 22, 2019

freeze the ethanol! and at least have bud at fridge temp! keeps chlorophyl down...

Jammal · May 22, 2019

clearheaded said:
freeze the ethanol! and at least have bud at fridge temp! keeps chlorophyl down...

Yeah, I've done by it all the fore mentioned ways,,, really all you need is your everclear as cold as you can get your freezer to keep it.... I'll hold it the 5 min wash in the freezer...

But anyways,,,more of they to come.

P.S. notice how frosty the bottle of booze is.

Rico Swazi · May 22, 2019

Have you seen this Jammal? should have been a sticky but easily came up with the search term 'qwet'

https://www.icmag.com/ic/showthread.php?threadid=200660

The only thing missing that I see in your set up would be a way to reclaim the ethanol instead of evaporating it.
Perhaps that is your intention and I spoke too soon.

Good luck with your extractions and be safe :tiphat:

Jammal · May 22, 2019

Rico Swazi said:
Have you seen this Jammal? should have been a sticky but easily came up with the search term 'qwet'

https://www.icmag.com/ic/showthread.php?threadid=200660

The only thing missing that I see in your set up would be a way to reclaim the ethanol instead of evaporating it.
Perhaps that is your intention and I spoke too soon.

Good luck with your extractions and be safe

Yeah man, I'll just evaporate the ethanol off...

I got a easy measured out formula, that's quick and efficient...I seen it come up in topic recently and thought it be cool to quickly share how I do.

Jammal · May 22, 2019

Here is a picture that helps explain what is about to happen.

Jammal · May 22, 2019

Ok , provided you have a clue.

1st step....baam, freezing cold everclear in with groud bud in pint jar, lid, shake, in freezer for 5 min.

Give a shake every few min...

Put your everclear back in freezer also...try to keep cold....(my freezer is stupid cold , in the -55f range, so I don't worry to much) just try to keep things cold...I've tried with out diligence and honestly it's not much different.

Jammal · May 22, 2019

Next step :

Transfer the juice to the next jar using mesh filter..

Jammal · May 22, 2019

Next step: the "chemical rinse"

Ok, so you need to drain the last little bit of the good stuff from the jar you just emptied....

Quick pour a little fresh cold everclear in, toss on the lid, shake a second and drain into the next jar...

Jammal · May 22, 2019

Ok...

Now repeat this process for as many jars as you need.up to 4 I do.

Jammal · May 22, 2019

Next: filter

Filter all the good stuff into the challace of bliss

Jammal · May 22, 2019

Second filter in to the pyrex dish for evaporation

Jammal · May 22, 2019

I use a slow cooker to help evaporate off...

First flat..

Then at an angle....

Looking yummy..

Jammal · May 22, 2019

Got a ways to go,,,

Caught up to real time,,,now we wait

Jammal · May 22, 2019

Burned off a good amount of alcohol,,moved to kitchen counter now to finish...

Until it's really thick you can swirl it around and it will recollect itself to a point...it's easier than scraping it up with a razor....

Most of it ,,,right at the end,, while it's still warm goo,,, I'll pour it off.. .

It will harder to shatter if you want, but since only everclear and water are the last things to purge it's not bad to leave it just a touch gooie to work with....I melt it into bowls pre smoking them until it absolutely absorbs and hardens...it's fun to watch holding a lighter to the hash oil and watching it bubble and then nelt and harden into the bud..

Jammal · May 23, 2019

Getting thicker, looking good

Jammal · May 23, 2019

This last little bit at the end takes the longest,,, must be the bit of water in the everclear..

Not long now

Jammal · May 23, 2019

Just finishing up...

Test oil for consistency...you can see it's turning to shatter where fully dried,,,,it's nice to try to get just under that...like tree sap...

Scrap up with razor and tools...

Ended up with 8 g of potent concentrate ,,, probably do a lot better with hash plants as oppose to sativa but,,,you can't get the same effect...

Strain is Malawi X Caribe

Vaporizando192 · Jan 21, 2020

How to RECLAIM the ethanol ??

How to RECLAIM the ethanol ??

Rico Swazi said:
Have you seen this Jammal? should have been a sticky but easily came up with the search term 'qwet'

https://www.icmag.com/ic/showthread.php?threadid=200660

The only thing missing that I see in your set up would be a way to reclaim the ethanol instead of evaporating it.
HOW TO RECLAIM THE ETHANOL ??

Perhaps that is your intention and I spoke too soon.

Good luck with your extractions and be safe

Thx

G.O. Joe · Jan 21, 2020

Much of it could be distilled in a simple distillation apparatus, but it would be diluted with water and other things from the plant matter, making it a less effective solvent. The water can be removed later without fractional distillation, but a little alcohol would have to remain in the residue for the resin to be fluid enough to transfer. Much solvent is retained by the pot - it would need to be heated to remove it, and some other solvent would be needed to remove the baked-on pot. Using alkane solvent is much simpler with the water insolubility, you get a higher recovery of purer solvent.

So you want to make easy safe hash oil with everclear?

Member

Attachments

Active member

Member

Active member

Member

Member

Attachments

Member

Attachments

Member

Attachments

Member

Attachments

Member

Member

Attachments

Member

Attachments

Member

Attachments

Member

Attachments

Member

Attachments

Member

Attachments

Member

Attachments

Member

Attachments

Member

Well-known member