A new start - Page 6 - Grow Diaries - International Cannagraphic Magazine Forums

Palindrome · 02-22-2018, 12:22 PM

Quote:

Originally Posted by Kaskadian

Looking good m8! Really nice work seriously!

Thanks mate, im just taking my time. I am sure most ppl could do this fairly easy, if they just take their time to plan it out and just go step by step.

The right tools, are half of a job well done.

starke · 02-22-2018, 02:17 PM

That is going to be one sweet setup when you are done.

Palindrome · 02-22-2018, 05:11 PM

Im not sure you guys know this, but Carbon wraping your car makes it faster, improves your mileage and gives a shit load of street cred!!!

I figured I would see if this will apply to other things, so instead of painting my tank. I desided to wrap it in carbon film.

And sure enough the magic of carbon wrapping, applies to pretty much anything.

Im now able to fit about 400 Liters, into my 250 L tank!
It automaticly adjust the Ph!
And i of cause expect less nutrients will be needed!

Okay, well it looks nice and it was cheaper.

Palindrome · 02-23-2018, 03:12 PM

Today I got started on mt Table top, still waiting on some sliders and other parts from E-bay.

The idea with the slide table is, that I can use a larger area for plants. And still be able to move up, on one side of the table.

The drain I have placed, so if will drain directly into the tank. No matter where the table is placed.

Now I mainly need to mount the sides, paint and fit the channel/ripple plate. And the table top and drain, are done.

bsgospel · 02-23-2018, 03:37 PM

Cool thread- cool room. Get any further with the seeds? *subbed*

Palindrome · 02-23-2018, 04:24 PM

Quote:

Originally Posted by bsgospel

Cool thread- cool room. Get any further with the seeds? *subbed*

Thank you and welcome aboard mate

No the seeds have not made it, still got them in moist paper towel.
I think they are a lost cause :(

I will be running clones the first grow(s), once im done with the flower room. Then I plan on building a LED light for a closet, where I can house a few moms and clones.

I have some seeds on the way from a good friend, and who knows I might be able to collect a few other goddies. From old friends, and friendly souls here at ICmag.

Palindrome · 02-24-2018, 12:22 PM

Got started on painting the table last night, today I cut, pre drilled and painted the sides for the table with the first coating.
I made the table in MDF to save money, but it need a better pain cover then plywood. Im using a good quality water based paint with wood preservation.

After the first coat is dry, the plan is to mount the sides and then give it a 2nd coating.

It's starting to look like something

9DRAGONS · 02-24-2018, 12:28 PM

will be nice to see it in action good luck with the build

bsgospel · 02-24-2018, 03:31 PM

I'm having some trouble with old seeds myself. The newer stuff is great but I have some batches that just aren't around anymore. It was this killer Bordello that got open pollinated by accident. 1 out of 8 popped and planted :/ My buddy had bundles of the stuff but now he can't find it.

Palindrome · 02-24-2018, 04:59 PM

Quote:

Originally Posted by 9DRAGONS

will be nice to see it in action good luck with the build

Thank you, im also looking forward to hte 'Action' part

Quote:

Originally Posted by bsgospel

I'm having some trouble with old seeds myself. The newer stuff is great but I have some batches that just aren't around anymore. It was this killer Bordello that got open pollinated by accident. 1 out of 8 popped and planted :/ My buddy had bundles of the stuff but now he can't find it.

It's a PITA to start over, and yeah most of the good old seems to be gone. I am sure they are out there as clones, and some have frozen beans. On the other hand, it will also be interessting to see, what have they come up with in the past 10 years. I read some crazy things about 25-30+ % strains, so it's clearly something have happend

Back to the build:
After they dried, I got the sides mounted on the table. They are just made from cut-off's, but the main function is not looking pretty. They are just there, to keep pot's from falling off the table

Once I was done with the sides, I gave the top side another coating of paint.

Next I'll paint the bottom side, with two coats and once it's dry.
Im debating with my self, if I should do a 3rd coating as well. The paint I got for free, and MDF is really bad at handling water. So to be on the safe side, I might give it all 3 layers of paint.

02-22-2018, 02:17 PM	#52
starke Member Join Date: Aug 2015 Location: Between Key West and Perdido Key Posts: 669	That is going to be one sweet setup when you are done. __________________ “We've all heard that a million monkeys banging on a million typewriters will eventually reproduce the entire works of Shakespeare. Now, thanks to the Internet, we know this is not true.” ~Robert Wilensky "Spread the knowledge, be humble if you don't know, be helpful if you do, if you are wrong, admit it quickly and emphatically, and overgrow the world." (SuperWeed 2017) "Always keep in mind that when the hearse pulls up to pick you up, there is no trunk or luggage rack on that bitch." (Author unknown) Current Grow: https://www.icmag.com/ic/showthread....343153&page=20 Page 20 forward
	Quote 1 members found this post helpful.

02-22-2018, 05:11 PM	#53
Palindrome Member Join Date: Jan 2018 Location: Republic State of Banana Posts: 193	Carbon Wrap Im not sure you guys know this, but Carbon wraping your car makes it faster, improves your mileage and gives a shit load of street cred!!! I figured I would see if this will apply to other things, so instead of painting my tank. I desided to wrap it in carbon film. And sure enough the magic of carbon wrapping, applies to pretty much anything. Im now able to fit about 400 Liters, into my 250 L tank! It automaticly adjust the Ph! And i of cause expect less nutrients will be needed! Okay, well it looks nice and it was cheaper. __________________ A New Start - diary of a retired farmer
	Quote

02-23-2018, 03:12 PM	#54
Palindrome Member Join Date: Jan 2018 Location: Republic State of Banana Posts: 193	Table Top Today I got started on mt Table top, still waiting on some sliders and other parts from E-bay. The idea with the slide table is, that I can use a larger area for plants. And still be able to move up, on one side of the table. The drain I have placed, so if will drain directly into the tank. No matter where the table is placed. Now I mainly need to mount the sides, paint and fit the channel/ripple plate. And the table top and drain, are done. __________________ A New Start - diary of a retired farmer
	Quote

02-23-2018, 03:37 PM	#55
bsgospel Member Join Date: Apr 2014 Posts: 398	Cool thread- cool room. Get any further with the seeds? subbed __________________ It's time for a revolution, but probably not in the terms that people imagine it. The word conjures up images of— a modern day version of peasants going into the street with their pitch forks to go after the bad guy who lives in a big house and we're gonna get that son-of-a-bitch and we'll take all the stuff from him and we'll give it to the workers. That's not the kind of revolution I had in mind. I thought that it might be nice if it was handled a little bit more modern and efficient way, without people getting slaughtered. It's a matter of infiltration…The people who are in control of the media, the government that run the lives of the average person in the street. They aren't doing a good job 'cause they don't really care. The potential is there in the younger generation. Right now they’re not really interested. Their political involvement is on a very superficial basis. They go out for the social aspects of a march or a rally rather than for what it could possibly accomplish. -FZ
	Quote

02-24-2018, 12:22 PM	#57
Palindrome Member Join Date: Jan 2018 Location: Republic State of Banana Posts: 193	Table sides Got started on painting the table last night, today I cut, pre drilled and painted the sides for the table with the first coating. I made the table in MDF to save money, but it need a better pain cover then plywood. Im using a good quality water based paint with wood preservation. After the first coat is dry, the plan is to mount the sides and then give it a 2nd coating. It's starting to look like something __________________ A New Start - diary of a retired farmer
	Quote

02-24-2018, 12:28 PM	#58
9DRAGONS Member Join Date: Jan 2018 Location: The land of the mountains Posts: 117	will be nice to see it in action good luck with the build
	Quote

02-24-2018, 03:31 PM	#59
bsgospel Member Join Date: Apr 2014 Posts: 398	I'm having some trouble with old seeds myself. The newer stuff is great but I have some batches that just aren't around anymore. It was this killer Bordello that got open pollinated by accident. 1 out of 8 popped and planted :/ My buddy had bundles of the stuff but now he can't find it. __________________ It's time for a revolution, but probably not in the terms that people imagine it. The word conjures up images of— a modern day version of peasants going into the street with their pitch forks to go after the bad guy who lives in a big house and we're gonna get that son-of-a-bitch and we'll take all the stuff from him and we'll give it to the workers. That's not the kind of revolution I had in mind. I thought that it might be nice if it was handled a little bit more modern and efficient way, without people getting slaughtered. It's a matter of infiltration…The people who are in control of the media, the government that run the lives of the average person in the street. They aren't doing a good job 'cause they don't really care. The potential is there in the younger generation. Right now they’re not really interested. Their political involvement is on a very superficial basis. They go out for the social aspects of a march or a rally rather than for what it could possibly accomplish. -FZ
	Quote