[moshli]

Originally Posted by beanja

whats your ph ? They seem like there locking up on you. Double check your calibration too. Gotta be ph related.

pH is staying really steady... 5.6- 6.1

[justanotherbozo]

...i would suggest that you simplify your approach until you get a few harvey's under your belt.

...part of your problem is that you're climbing 2 learning curves, the hydro curve and the plant growing curve, believe me, knowing how cannabis grows going in makes dialing in active hydro much easier.

...that's not to say that what you're attempting can't be done, just that without the plant reading skills it becomes much more difficult.

...i personally would suggest that you consider coco hempy buckets fed KISS style, which is a passive form of hydro that is very simple and formulaic to run and with the added benefits of being very simple and inexpensive to run, very forgiving to the inexperienced hand and very productive with growth rates similar to DWC without all the drama.

DWC can be a real bitch to nail down.

peace, bozo

[moshli]

Originally Posted by justanotherbozo

...i would suggest that you simplify your approach until you get a few harvey's under your belt.

...part of your problem is that you're climbing 2 learning curves, the hydro curve and the plant growing curve, believe me, knowing how cannabis grows going in makes dialing in active hydro much easier.

...that's not to say that what you're attempting can't be done, just that without the plant reading skills it becomes much more difficult.

...i personally would suggest that you consider coco hempy buckets fed KISS style, which is a passive form of hydro that is very simple and formulaic to run and with the added benefits of being very simple and inexpensive to run, very forgiving to the inexperienced hand and very productive with growth rates similar to DWC without all the drama.

DWC can be a real bitch to nail down.

peace, bozo

Thanks for the advice, wish I asked you before I started. But I'm trying to deal my current situation...

I've already bought buckets, netpots, hydroton, water pumps, air pumps, air lines, etc. It's all already setup. And paid for. There's a plant in there already. It has a deficiency.

Was hoping an experienced set of eyes could identifiy the deficiency? Does anyone recognise this deficiency?

[beanja]

you should be hand watering till roots poke out net pots. once they start poking out and reach water then turn on your pump and then raise water level in bucket

[beanja]

whats your ec after nutes

[moshli]

Originally Posted by beanja

whats your ec after nutes

EC 520

Originally Posted by beanja

you should be hand watering till roots poke out net pots. once they start poking out and reach water then turn on your pump and then raise water level in bucket

The roots are already very much in the water, like a horsetail

[beanja]

is that.ppm ? if so try lower. dwc likes lower ec.
they about 2 wks old ? try ec .3 or 210 ppm

[moshli]

Originally Posted by beanja

is that.ppm ? if so try lower. dwc likes lower ec.
they about 2 wks old ? try ec .3 or 210 ppm

So it looks like nute burn to you?

[moshli]

Just to clarify:

the water comes out of my tap at 0.31 ec or 150ppm (0.5x scale).
After adding bennies and nutes it's up to 0.52 ec or 260ppm.

[justanotherbozo]

Originally Posted by moshli

Thanks for the advice, wish I asked you before I started. But I'm trying to deal my current situation...

I've already bought buckets, netpots, hydroton, water pumps, air pumps, air lines, etc. It's all already setup. And paid for. There's a plant in there already. It has a deficiency.

Was hoping an experienced set of eyes could identifiy the deficiency? Does anyone recognise this deficiency?

...yeah, i understand where you're coming from but putting your active hydro experiment on hold until you have some idea what to expect doesn't mean you can't go back once you DO know what to expect or that your efforts to date have been wasted, it just gives you a chance to get some experience at growing successfully before you move toward more advanced techniques.

...i personally haven't used any of my pumps in several years, and i have several, and while i could look at that as that i wasted my money buying all those pumps i instead choose to look at it as just a part of my evolution as a grower.

...each grower needs to have a serious inner discussion to define thier goals, what they expect to reap, and what level of labor they are willing to expend, me, i'm an old guy who aims for consistency and lack of labor and drama.

...with 8x 2gallon hempy buckets inside a 4x4 tent with a single 600HPS, barebulb vertical style, i pull between 12 and 16 zipz per cycle like clockwork and it's simple enough so i can nap through most of it. The reason that the yield varies so widely is because i never monocrop.



...i am NOT telling you that you can't do DWC successfully if you stick with it but i worry knowing how frustrating it can be to see your plants consistently doing poorly, i've seen a LOT of people come and go over the years and so i always recommend that newcomers aim for simplicity and reliability until they earn some experience points before over-complicating things.

...anyway, all any of us can do is make suggestions, it's you that has to make the call.

peace, bozo

PS: i would also recommend that you consider photoperiodic plants going forward, with autos you get one grow per seed and if you find something special, tough shit, you can buy more seeds and hope but you can't clone and be sure of what you'll get, i have a few in my collection that i have been enjoying for years and hundreds of others that have been tried and discarded, keepers are hard to find, lol. ...especially among autos.