[PeytriaRx Eng.]

I just wanted to drop by and let everyone on here know that we have custom certified and stamped turn-key processing labs available.

Our Containerized Process Facilities are manufactured in Everett Washington. They are fairly custom units and the cost can vary greatly depending on the application and location. We usually recommend our 20' units that are suitable for up to one 60L hydrocarbon CLS + work space. It will also fit a dual 150L reactor set up and recovery unit very comfortably. The cost is also very dependent on occupancy ratings and use permits as well as environmental conditions the unit will be operating in. We usually like to get involved with our clients Local AHJ to present and review our specifications prior to final design. Sometimes the scope and cost of the units can be significantly reduced depending on your needs and the local requirements.

Some other information we ask for includes:

Floor plan showing proposed container on site (if they don’t have this we usually start here with our architects)
Current use permit
Current occupancy rating for the intended location
Do they have backup power already?
List of vessels and powered devices inside and outside the container

The most import things are the power type and budget from the incomer and max in-use solvent amounts per area. For our units that are designed to power all the auxiliary equipment we usually recommend 400 amp distribution that we install on the exterior of the unit. This can be used reduce the cost of fixed electrical installation and can be designed to power every single item in the facility including packaging equipment where it make sense.

Our average lead time is 8.5 weeks on custom units. These units typically run $90-$130K FOB depending on features and permitting. The unit we have available in stock from a client who did not come through on final payment is currently discounted from 116K to 106K FOB.

The unit was designed for the following compliance
· WA/OR State Cannabis Regulations
· NFPA90A
· NFPA70
· NFPA30
· NFPA58
· OSHA
· DOT
· NEC500 C1div1 group D
· Title 24 ( California)
· UL (certified)

The current design has the following components:
· Full gas detection and ventilation automation
· 4 cfm/sq.ft
· Smoke detection
· Chemical fire suppression
· Water fire suppression
· 2 interior 220V plugs
· 4 interior 115V plugs
· 8 exterior 115V plugs
· 1 exterior 30HP 480 disconnects
· 2 exterior high current 220V plugs
· 2 20 amp exterior 220V plugs
· 400 amp 480V service
· Caster package
· Esd floor package
· Food grade sink package with hot and cold water plumbing
· 6 1/2"-1.75" adjustable c1d1 process connection pass-throughs
· Chemical storage cabinets
· Secure cylinder storage
· uL508 operator control panel
· Exterior Indicator lights for in use and alarms

Semi-Standard features not included currently:
· Heater w/ thermostat
· Outdoor insulation package

Common additional items and costs:
· Caster package $2,500
· Average Freight: $950
· Average price of crane rental for unloading - $1400
· PE stamp (installed at location) $6500

Feel free to give me a call if you have any questions. Here is a 3D tour of our 40’ unit. https://my.matterport.com/show/?m=rpG2HdxZvTN

We are an engineering and compliance firm specializing in light commercial hazard material processing facility and process design. If you are currently in the processes of applying for a rec license or building a facility do not hesitate to give us a call.

Zach Jordan | Director of Engineering
PeytriaRx
Mobile: 503.703.6939
Email:Zach@PeytriaRx.com
227 Bellevue way NE #460 Bellevue, WA. 98004