aeroponics clone machine? - Cuttings & Propagation Techniques - International Cannagraphic Magazine Forums

SMALLTUBES · 10-28-2016, 04:16 AM

anybody try the clone king machine from amazon....i got one and it blows...olg school humidity dome and a tray ith promix...and rootech gel...let me now who's tried to use one and results and also others using bubble/aero machines....

SMALLTUBES · 10-31-2016, 12:29 AM

Well i switched back to the tradish way of cloning and already had success...now i got over confident and im damping off now...well anyways...

Vanilla Phoenix · 11-03-2016, 09:36 PM

I've been running a clone King and have had great results!

SMALLTUBES · 11-09-2016, 06:45 PM

WHAT KIND OF TEMPS? I SAID FUCK THAT THING AND WENT STRAIGHT PERLITE AND DOME AND BEEN DOIN BETTER SINCE THE SWITCH....NOT 1 WITH THE CLONE KING

MJPassion · 11-18-2016, 06:30 PM

When I got my EZ-Cloner 30 I had awesome success for about 3 years. Since then it's been fairly good but every once in a while I can't get shit to root.

I'm guessing my water quality has something to do with my success/failure ratio as I typically use hard tap water.

I've experienced good results once again using the dead res method of cloning.
It works pretty damn fine from my point of view. Without using the dead res method, H2O temps are probably going to cause issues,

Lyfespan · 11-18-2016, 06:35 PM

i love mine i get roots in 3-5 days, i actually have 3 of the 64 site, and 3 of the 36 site. ebay had them cheaper in sets of 2btw

i have no idea what the temps are i never check, sometimes its really hot 90+ and sometimes its cold 70ish

Vanilla Phoenix · 11-18-2016, 11:03 PM

I use a cycle timer on mine (15 on 15 off). The propagation area it's in is on 18/6 light schedule. Ambient temps in area are 67F-72F. Temp of rez stays around 70F. Only thing i put in rez is an air stone and some bloom nutes at around 1/8 strength. I keep the pH between 6.0-6.2 Cuts stay nice and green with no yellowing at all and they usually take 10 days to root.

Because my rez temps are so low, I never get any slime or bacteria. I only top off the rez with same strength nute solution and I only clean it every three months or so. I run a perpetual grow so I always have rooted and unrooted cuts in cloner.

DemonTrich · 11-19-2016, 02:02 AM

I run 4 of the 25 site ones. 2 running for 2+yrs. Use dip n grow cloning solution. Pony up the 10.00, it's good for up to 1000 cuttings, roots faster than 10 other cloning dips/gels/ect I've tried in 4 yrs.

One strain, 3 days from cut I have nubs, 5 days a beard, 8 days I pot in solo cups.

SMALLTUBES · 11-19-2016, 03:16 AM

damn you guys are doing something right...i had all my conditions correct..just no luck...although my water comes out at 7....tried 3 diffrent batches of about 25 and no luc out of 75...went back to promix and dome and roots in 7-10 days repotting at about 15 days and all is good...just dont now what was up...

Herb Al Cure · 11-20-2016, 08:35 PM

Built my own cloning bucket and have had great success until I chose to clone a sativa then all hell went down, I have heard that they don't clone well and have to wait a long time to see roots popping. My Indica's are beautiful and really do well. My Ph is 6.5 constantly sprayed with the pump in 75-80 degree temps. My mother plant for Sativa is an extra from each session of cloning that provides children for the new cycle. The only thing I can say is that my Sativa has been cloned dozen and dozens of time, perhaps its running out of juice? Any help would be appreciated

10-28-2016, 04:16 AM	#1
SMALLTUBES Member Join Date: Jan 2005 Posts: 53	aeroponics clone machine? anybody try the clone king machine from amazon....i got one and it blows...olg school humidity dome and a tray ith promix...and rootech gel...let me now who's tried to use one and results and also others using bubble/aero machines....
	Quote

10-31-2016, 12:29 AM	#2
SMALLTUBES Member Join Date: Jan 2005 Posts: 53	Well i switched back to the tradish way of cloning and already had success...now i got over confident and im damping off now...well anyways...
	Quote

11-03-2016, 09:36 PM	#3
Vanilla Phoenix Super Lurker Join Date: Jan 2015 Posts: 2,438	I've been running a clone King and have had great results!
	Quote 1 members found this post helpful.

11-09-2016, 06:45 PM	#4
SMALLTUBES Member Join Date: Jan 2005 Posts: 53	WHAT KIND OF TEMPS? I SAID FUCK THAT THING AND WENT STRAIGHT PERLITE AND DOME AND BEEN DOIN BETTER SINCE THE SWITCH....NOT 1 WITH THE CLONE KING
	Quote

11-18-2016, 06:30 PM	#5
MJPassion Observer Join Date: Dec 2012 Location: uni-verse Posts: 5,584	When I got my EZ-Cloner 30 I had awesome success for about 3 years. Since then it's been fairly good but every once in a while I can't get shit to root. I'm guessing my water quality has something to do with my success/failure ratio as I typically use hard tap water. I've experienced good results once again using the dead res method of cloning. It works pretty damn fine from my point of view. Without using the dead res method, H2O temps are probably going to cause issues,
	Quote

11-18-2016, 06:35 PM	#6
Lyfespan Senior Member Join Date: Jan 2015 Location: SoCal Posts: 1,329	i love mine i get roots in 3-5 days, i actually have 3 of the 64 site, and 3 of the 36 site. ebay had them cheaper in sets of 2btw i have no idea what the temps are i never check, sometimes its really hot 90+ and sometimes its cold 70ish __________________ https://www.icmag.com/ic/showthread.php?t=299327 https://www.icmag.com/ic/showthread.php?t=299307
	Quote 1 members found this post helpful.

11-18-2016, 11:03 PM	#7
Vanilla Phoenix Super Lurker Join Date: Jan 2015 Posts: 2,438	I use a cycle timer on mine (15 on 15 off). The propagation area it's in is on 18/6 light schedule. Ambient temps in area are 67F-72F. Temp of rez stays around 70F. Only thing i put in rez is an air stone and some bloom nutes at around 1/8 strength. I keep the pH between 6.0-6.2 Cuts stay nice and green with no yellowing at all and they usually take 10 days to root. Because my rez temps are so low, I never get any slime or bacteria. I only top off the rez with same strength nute solution and I only clean it every three months or so. I run a perpetual grow so I always have rooted and unrooted cuts in cloner.
	Quote 1 members found this post helpful.

11-19-2016, 02:02 AM	#8
DemonTrich Senior Member Join Date: Jan 2013 Posts: 1,088	I run 4 of the 25 site ones. 2 running for 2+yrs. Use dip n grow cloning solution. Pony up the 10.00, it's good for up to 1000 cuttings, roots faster than 10 other cloning dips/gels/ect I've tried in 4 yrs. One strain, 3 days from cut I have nubs, 5 days a beard, 8 days I pot in solo cups.
	Quote 1 members found this post helpful.

11-19-2016, 03:16 AM	#9
SMALLTUBES Member Join Date: Jan 2005 Posts: 53	damn you guys are doing something right...i had all my conditions correct..just no luck...although my water comes out at 7....tried 3 diffrent batches of about 25 and no luc out of 75...went back to promix and dome and roots in 7-10 days repotting at about 15 days and all is good...just dont now what was up...
	Quote

11-20-2016, 08:35 PM	#10
Herb Al Cure Newbie Join Date: Jun 2016 Posts: 1	Built my own cloning bucket and have had great success until I chose to clone a sativa then all hell went down, I have heard that they don't clone well and have to wait a long time to see roots popping. My Indica's are beautiful and really do well. My Ph is 6.5 constantly sprayed with the pump in 75-80 degree temps. My mother plant for Sativa is an extra from each session of cloning that provides children for the new cycle. The only thing I can say is that my Sativa has been cloned dozen and dozens of time, perhaps its running out of juice? Any help would be appreciated
	Quote