[i4disperai]

hi guys,it s my second time that I clone with a clone tray.
the first experiment was not perfect so only a few cut rooted but this rooted so good.
i m also using a dome.

i got two main problems : PH and water temperature..

nobody is using a clone tray ?

[i4disperai]

this rooted like that in 10 days

[i4disperai]

I'm using 1 water pump 1000 l/h with no air pump.
water temperature in couple days go to 30 C° degrees, and the ph from 6 goes up to 8.5 also if i adjust, with ph down, in half day it goes up to 8.5.
but no worry, in 7 days I saw the first roots coming out.

this time im not adjusting ph

and i ' m thinking to add some roots stimularor al the water, i used bottle water and osmosis water mixed in a half.

i'm using BAC , anybody knows if bac roots stimulator works in aeroponic?

thanks guys . PEace

[slownickel]

Your temperature and pH are both too high. Try adjusting the pH BEFORE putting in the plants. Vinegar works well. Try to get down to a pH of 6.2 or so.

I tried putting in nutrients, had a slime problem like you couldn't believe.

[woodchuck3232]

Stop using vinegar for Ph adjusting. Vinegar is also responsible for the slime Bild up - bacteria

[slownickel]

I use white vinegar (acetic acid) and have not had any problems since with my Klone machine.

What would you recommend to acidify with in this case of high pH? Citric acid?

[woodchuck3232]

We usw nitric acid by canna . If tap Water has ph8 use 3ml for 10l to Drop IT to 6 ph

[slownickel]

Here in Peru it is not available. In fact, you would go to jail if found with some. One needs a very special permit to purchase acids, whether muriatic, nitric or sulfuric. This is due to the huge coke biz here....

[woodchuck3232]

Sorry didn't know. And how About mixing tap With distilled water to bring ph down. Distilled water Has around 4-5 ph

[slownickel]

Distilled water from my distiller that I used for drinking water runs about 6.8 por so here. Your distilled water is acid? That's strange.