[HereIgrowagain]

Hi lads, my previous grow was inside an out door building so the smell from week 6 of flower on wards from the outtake was not so much of a problem.

I am now contemplating setting a grow up inside the house, I really really need a zero detection of any odours not just for the rest of the family/house but to keep it from the rest of the street/neighbours.

Am I pissing against the wind in thinking that this may be possible?

Toying with the idea of 1m up to a max of a 1.5 m tent. running anything from a 600-1000watt hps single light source.

I would much rather just let that warm air run into the room where the tent is, where I am the added heat will be a side bonus, but, I need it to be odour free.

Intake, no worries there for to keep temps down etc.

I paid quite a few quid for the scorpion filter that is on the outside/inside set up and to be honest, if that was in the house the whole street would have moved out.

Someone please point me in the direction of making the tent as odour free as possible. I understand diff size tents need diff extractions so that makes a diff with filters etc. But which filtration or extra filtration do I need to put in place?

Cheers in advance.

[RudeDog]

Glad you've started this thread. I'm at that point of buying an extractor and scrubber for a 1.2m sq tent with a 600w HPS.

5" filter on a 6" fan I reckon.

[The Pheonix]

can't smell a thing if you set it up properly even the dankest dank can be kept at bay. just costs a few pennies and a bit of fun research thats all

[Chrondiddle O]

ozone generator

[HereIgrowagain]

I have pennies to spend Phoenix. Remember mate, my past youth was outdoor growing. How much research do I have to do ffs, should I turn the house into a lung

[The Pheonix]

i'm really stoned...... you want more going out than you got coming in (slight negative pressure) and a tightly sealed room..... then any little holes wont let any smells escape... i use a nice big carbon filter and 125mm climate controlled extractor attached to acoustic ducting and expelled well away.... not one complaint

[HereIgrowagain]

Sound is not a problem, also as I said I would like if possible to utilise the extra heat from the tent into the surrounding area. Just need it smell free mate. Negative pressure goes without saying just want to add whatever extra odour removal/filters as possible within the extraction. Pennies to spend does not quite stretch as far as ozone control quite yet.

[944s2]

Originally Posted by HereIgrowagain

Sound is not a problem, also as I said I would like if possible to utilise the extra heat from the tent into the surrounding area. Just need it smell free mate. Negative pressure goes without saying just want to add whatever extra odour removal/filters as possible within the extraction. Pennies to spend does not quite stretch as far as ozone control quite yet.

Hey hereigrowagain. ,I been using the same little ozone generator for years and chucks out enough to deal with the smell without detriment to the crop,,,,,it's around £100 or so and is made in Japan,,,,
Check out basement lighting in Boston in linconshire,,,,,
One of those plus an oversized exhaust and filter with acoustic ducting should sort it plus ozone is great for protecting your crop from mold,,,,,,best of luck mate,s2

[theherbalizor]

Over rate the carbon to the fan and not the other way round. So if 6 inch fan, use an 8 inch filter. Not only will you have no detectable smell, you'll also get a lot longer use out of your filter.

I've use Rhino, phresh, can etc. all work as described on the tin.

[HereIgrowagain]

Originally Posted by 944s2

Hey hereigrowagain. ,I been using the same little ozone generator for years and chucks out enough to deal with the smell without detriment to the crop,,,,,it's around £100 or so and is made in Japan,,,,
Check out basement lighting in Boston in linconshire,,,,,
One of those plus an oversized exhaust and filter with acoustic ducting should sort it plus ozone is great for protecting your crop from mold,,,,,,best of luck mate,s2

That is not out of my range 944s2. Is there or as I should say, do you have any pics/diagrams as to how to set that unit up correctly for the extraction or is it just a plug and play system inside the tent set up mate?