C 25 Door light leak q? - Growroom Lighting - International Cannagraphic Magazine Forums

Puff Puff Pass · 04-19-2006, 04:46 AM

I know this has probably been answered a few times but I can't seem to find the answer. How did everyone block the light leaks from the doors in a c25 or a c13? I just set up a dual stage c25 grow room as an early birthday present to myself but the last step is to finish off these doors. Any help would be greatly appreciated.

Jnugg · 04-19-2006, 11:30 PM

Foam weather stripping

Vern Equinox · 04-19-2006, 11:53 PM

There's something you can do with some kind of putty/plumber's caulk and vaseline/oil.

Close the doors with the putty in place, with a thin layer of your lube of choice. Ti hardens/cures, and then you're good to go.

I need to do this myself, so specific info on brands would be nice. Thanks in advance.

SEEDYNONO · 04-19-2006, 11:56 PM

Quote:

Originally Posted by Jnugg

Foam weather stripping

yep i got some vinyl stripping from home depot and ran it around all the seams on the front of the cab. this really makes it easy.

Puff Puff Pass · 04-20-2006, 03:07 AM

Thx for the advice. I've used weather stripping before and have always had problems it never comes out looking clean for me.
Vern that sounds like an interesting idea.

04-19-2006, 04:46 AM	#1
Puff Puff Pass Member Join Date: Feb 2006 Posts: 68	C 25 Door light leak q? I know this has probably been answered a few times but I can't seem to find the answer. How did everyone block the light leaks from the doors in a c25 or a c13? I just set up a dual stage c25 grow room as an early birthday present to myself but the last step is to finish off these doors. Any help would be greatly appreciated. __________________ "I would rather die like a man than live like a coward'' - Pac
	Quote

04-19-2006, 11:30 PM	#2
Jnugg Senior Member Join Date: Feb 2006 Location: S.E. USA Posts: 1,720	Foam weather stripping __________________ Jnugg Converts & Goes Vertical Organic Tea Party w/ The Rev. Ventilation 101
	Quote

04-20-2006, 03:07 AM	#5
Puff Puff Pass Member Join Date: Feb 2006 Posts: 68	Thx for the advice. I've used weather stripping before and have always had problems it never comes out looking clean for me. Vern that sounds like an interesting idea. __________________ "I would rather die like a man than live like a coward'' - Pac
	Quote

04-19-2006, 11:53 PM	#3
Vern Equinox Member Join Date: Apr 2006 Location: Tube of Green! 70 SQ FT of Flowering Screen Posts: 133	There's something you can do with some kind of putty/plumber's caulk and vaseline/oil. Close the doors with the putty in place, with a thin layer of your lube of choice. Ti hardens/cures, and then you're good to go. I need to do this myself, so specific info on brands would be nice. Thanks in advance.
	Quote