The NEW E-Papillon 1000W Thread - Page 5 - Growroom Lighting - International Cannagraphic Magazine Forums

pHive.8 · 10-01-2013, 10:54 AM

@thewhitelotus
Great to hear you will be trying the ePapillon fixtures! You will be amazed by the yield!
Your 4x4 area will definately be covered by the footprint of the ePapillon 1000W.
500 cfm should be sufficient. You can expect about 4000 BTU on heat coming from them.
The ePap's have just regular 240V plugs.

thewhitelotus · 10-01-2013, 05:12 PM

thanks for the info. found a dealer locally that can get the units in a day or two since were fairly close to Irvine. think i might step up the fan to a 725 and get a controller just to be on the safe side

pHive.8 · 10-02-2013, 03:06 PM

@thewhitelotus
Good to hear! Good luck with your ePap's. I'm sure you'll definately like them!

habeeb · 10-03-2013, 05:32 AM

DGS,

another question on the 315 fixture..

do they ship with a bulb? or do I have to buy separate?

Thanks

pHive.8 · 10-03-2013, 10:16 AM

@Habeeb
I can be either way. Please check with your shop.
The dPapillon can come with two types of lamps and both can be supplied by your shop.

Ogmijukush · 10-08-2013, 04:28 AM

Hello, I was wondering I want to cover a 4'x16.5' footprint. Should I use 3 or 4 e-paps?

pHive.8 · 10-08-2013, 01:03 PM

Quote:

Originally Posted by Ogmijukush

Hello, I was wondering I want to cover a 4'x16.5' footprint. Should I use 3 or 4 e-paps?

3 ePapillon 1000W fixtures will result in about 1000 µmol/m²s.
4 ePapillon 1000W fixtures will result in about 1200 µmol/m²s.

It's up to you!
Either way, the light will be uniform over the total surface when putting them 3 ft above the plants.

rawgutter · 10-08-2013, 06:48 PM

I'm a big fan of max lighting... How close could I stack these, 8 lights side by side? 3'x4', 3.5'x4'? Thanks

pHive.8 · 10-08-2013, 08:12 PM

@rawgutter:

How close could you stack these. I'm not sure what you mean, but you can stack them as close as you want. The lightdistribution is made in such a way that it is very clean so very smooth.
This is necessary for greenhouses that do flowers.
Lighting for chrysanthemum is installed in a pattern of 31 ft by 4 ft at a height of 9 ft. They get uniformities of > 90% with no problem at all.
They work with lightlevels of 100 micromol/m2s. Medicine will grow best at about 1000 micromol/m2s.
So the closer you put up the lights, the better the uniformity will be and the higher the lightlevel will be. The lightdistribution will only get better when more lights are installed.

Or did you ask a complete different question? I'm Dutch so I might have misunderstood you.

rawgutter · 10-08-2013, 08:25 PM

Lets say I have room for a bed that is 8 foot by 12 foot or 8 foot by 14 foot, could I put 8 lights in that area with out issue? CO2 sealed room with plenty of AC.

I currently run 12 radiant 8s in a 9 foot x 12 foot area and like the results.

10-01-2013, 05:12 PM	#42
thewhitelotus Senior Member Join Date: Nov 2012 Posts: 3,174	thanks for the info. found a dealer locally that can get the units in a day or two since were fairly close to Irvine. think i might step up the fan to a 725 and get a controller just to be on the safe side
	Quote 1 members found this post helpful.

10-08-2013, 04:28 AM	#46
Ogmijukush Newbie Join Date: May 2013 Posts: 1	Hello, I was wondering I want to cover a 4'x16.5' footprint. Should I use 3 or 4 e-paps?
	Quote 1 members found this post helpful.

10-08-2013, 08:12 PM	#49
pHive.8 Vendor Join Date: Mar 2013 Posts: 153	@rawgutter: How close could you stack these. I'm not sure what you mean, but you can stack them as close as you want. The lightdistribution is made in such a way that it is very clean so very smooth. This is necessary for greenhouses that do flowers. Lighting for chrysanthemum is installed in a pattern of 31 ft by 4 ft at a height of 9 ft. They get uniformities of > 90% with no problem at all. They work with lightlevels of 100 micromol/m2s. Medicine will grow best at about 1000 micromol/m2s. So the closer you put up the lights, the better the uniformity will be and the higher the lightlevel will be. The lightdistribution will only get better when more lights are installed. Or did you ask a complete different question? I'm Dutch so I might have misunderstood you. Last edited by pHive.8; 10-08-2013 at 08:37 PM.. Reason: misunderstood question
	Quote

10-01-2013, 10:54 AM	#41
pHive.8 Vendor Join Date: Mar 2013 Posts: 153	@thewhitelotus Great to hear you will be trying the ePapillon fixtures! You will be amazed by the yield! Your 4x4 area will definately be covered by the footprint of the ePapillon 1000W. 500 cfm should be sufficient. You can expect about 4000 BTU on heat coming from them. The ePap's have just regular 240V plugs.
	Quote

10-02-2013, 03:06 PM	#43
pHive.8 Vendor Join Date: Mar 2013 Posts: 153	@thewhitelotus Good to hear! Good luck with your ePap's. I'm sure you'll definately like them!
	Quote

10-03-2013, 05:32 AM	#44
habeeb follow your heart Join Date: Feb 2008 Posts: 4,088	DGS, another question on the 315 fixture.. do they ship with a bulb? or do I have to buy separate? Thanks
	Quote

10-03-2013, 10:16 AM	#45
pHive.8 Vendor Join Date: Mar 2013 Posts: 153	@Habeeb I can be either way. Please check with your shop. The dPapillon can come with two types of lamps and both can be supplied by your shop.
	Quote

10-08-2013, 06:48 PM	#48
rawgutter Newbie Join Date: Aug 2012 Posts: 7	I'm a big fan of max lighting... How close could I stack these, 8 lights side by side? 3'x4', 3.5'x4'? Thanks
	Quote

10-08-2013, 08:25 PM	#50
rawgutter Newbie Join Date: Aug 2012 Posts: 7	Lets say I have room for a bed that is 8 foot by 12 foot or 8 foot by 14 foot, could I put 8 lights in that area with out issue? CO2 sealed room with plenty of AC. I currently run 12 radiant 8s in a 9 foot x 12 foot area and like the results.
	Quote