Cool Tube Cord... - Growroom Lighting - International Cannagraphic Magazine Forums

03-25-2006, 06:12 AM

what do you guys do with the cord that goes to the modul when you have ducting on both ends of the cool tube? I was thinking about this today

03-25-2006, 06:42 AM

I just cut a hole in the ducting ran it through, and sealed it up with aluminum tape.

NiteTiger · 03-25-2006, 06:44 AM

Just go around

03-27-2006, 12:20 AM

the aluminum tape sounds like a good idea...NICE

Sauce · 03-27-2006, 05:56 AM

I got a fat cord coming off of mine and just cut a hole in the reducer and then added tape over. My mogul base is still on which kills airflow but I didn't want to rewire my lamp.

Aluminum tape is very nice to have for many situations. It's really strong and reflective.

AlexanderS · 03-28-2006, 11:22 PM

you could run it thru the duct or cut a hole and just seal it, long as its air tight wont matter too much.

03-30-2006, 12:05 AM

i just ran it thru the ducting and then taped around the hole...pics coming sooon~~~

bostrom155 · 03-30-2006, 06:48 AM

Here's what i did

03-30-2006, 08:36 AM

I like how you made the fixture easy to get to. Now that i'm having to work on mine, i'm dreading tearing it apart to get to that.

bostrom155 · 03-30-2006, 09:46 AM

Quote:

Originally Posted by akrazy

I like how you made the fixture easy to get to. Now that i'm having to work on mine, i'm dreading tearing it apart to get to that.

Yea but the other way is easier for cleaning the glass, but because of the light pattern this is better

Had it this way before

03-25-2006, 06:12 AM	#1
Guest Guest Posts: n/a	Cool Tube Cord... what do you guys do with the cord that goes to the modul when you have ducting on both ends of the cool tube? I was thinking about this today
	Quote

03-25-2006, 06:44 AM	#3
NiteTiger Tiger, Tiger, burning bright... Join Date: May 2005 Posts: 4,256	Just go around __________________ *Remember - Every 'elite' started off as someone's bagseed* kingjobber - This hash just uncentered my chi Growing cannabis is only as complicated and expensive as you want it to be. Current Grow: Knowledge Guides: Diatomaceous Earth - The Best Pesticide You've Never Heard Of Pontiac's DIY Link-O-Rama Unofficial Glossary for New Growers The Water Cure- How, when, and why How to remove 'HPS Orange' quick and easy!
	Quote

03-27-2006, 05:56 AM	#5
Sauce Member Join Date: Feb 2006 Posts: 713	I got a fat cord coming off of mine and just cut a hole in the reducer and then added tape over. My mogul base is still on which kills airflow but I didn't want to rewire my lamp. Aluminum tape is very nice to have for many situations. It's really strong and reflective. __________________ Recovered Overgrow GrowFAQ's CannaStats Info OG Refugee :
	Quote

03-30-2006, 06:48 AM	#8
bostrom155 Ben Spies...enough said Join Date: Feb 2006 Posts: 775	Here's what i did __________________ https://www.superbikeplanet.com/newind.htm/ AMA Superbike.. World Superbike.. Moto GP
	Quote

03-25-2006, 06:42 AM	#2
Guest Guest Posts: n/a	I just cut a hole in the ducting ran it through, and sealed it up with aluminum tape.
	Quote

03-27-2006, 12:20 AM	#4
Guest Guest Posts: n/a	the aluminum tape sounds like a good idea...NICE
	Quote

03-28-2006, 11:22 PM	#6
AlexanderS Toaster Repair Specialist Join Date: May 2004 Location: home Posts: 223	you could run it thru the duct or cut a hole and just seal it, long as its air tight wont matter too much.
	Quote

03-30-2006, 12:05 AM	#7
Guest Guest Posts: n/a	i just ran it thru the ducting and then taped around the hole...pics coming sooon~~~
	Quote

03-30-2006, 08:36 AM	#9
Guest Guest Posts: n/a	I like how you made the fixture easy to get to. Now that i'm having to work on mine, i'm dreading tearing it apart to get to that.
	Quote