[trichrider]

doesnt that shit fall through the screen in your pipe? alot of work indeed. peace

fwiw. those are freaking nice boxes...

[bubbleman]

I also wanted to add to this what we cleaned out of all those headies and why dry sift is such a small return> The 70u screen we used will still let gland heads fall thru , but they are smaller than 70u and generaly not the best of the best. I know people who enjoy their 45u bubble but i personaly smoked mostly the 120µ-73µ bubble and thats where my enjoyment lies. So there will still be some active's under your final screen on the catch plate but they will be best in my opinion for making edibles.
Here you see the high percentage of capitate stalks and cystolith hairs with some smaller heads mixed in.. this is why most peoples dry sift DOES NOT MELT..



another shot of the botton catch plate . as you can see with multi screen dry sifting you do not get the BEST at the bottom of the catch plate.. that is reserved for the top of our last screen 70µ





and so as to not leave you with a nasty shot like that for the end of an informative thread i will post one more shot of the bowl im about to consume..




Also if you would like to see how effective i was in getting this non melty dry sift to melt.. please feel free to watch this short youtube video. The title is a mistake it wasnt 40 minutes of carding it was 35!!

IMPORTANT NOTICE: No media files are hosted on these forums. By clicking the link below you agree to view content from an external website. We can not be held responsible for the suitability or legality of this material. If the video does not play, wait a minute or try again later.

I AGREE

https://www.youtube.com/watch?v=8nPje...ature=youtu.be

[burns1n209]

Wow very nice

[bubbleman]

Here is a screen shot i took from the youtube video.. please make sure you check it out its by far the most inspirational part of this thread




Peace
Bubble man

[benzo]

Wow ! Great write up. And awesome pictures. Bet that tastes very delicious.

[midwestHIGHS]

Very Beautiful drysift and thank you for sharing the process with such well taken pictures. Full melt dry sift is a true a art, very few who master the technique or even try these days. I can't wait to get a new set of screens and have go.

Anyone ever dab fullmelt drysift on ti or quartz?

excellent tutorial! Extremely clean dry sifted hashish like that is the pure essence of the plant, it's the ultimate.

and the best part about pure dry sift compared to good quality dry sift is the impact of the high......good dry sift tastes good and gets you high, but the pure really hits much harder warming your ears, sweating up your forehead and giving your brain a Zing! and the taste is ten times better and the other great thing about pure dry sift is that it only takes a tiny amount to achieve a much better experience than by smoking bowl after bowl of the usual mostly contaminated sift that most make with a single screen.

I'd also suggest to add that when sifting at room temperatures, do not try this advanced method with bud or sugar leaf that is only a few weeks old, as although the plant matter is dry enough to sift, the trichomes often take months to lose moisture and become less "gooey" and so may easily rupture and get squashed on the screens....this does three things, the screens become partially blocked, it prolongs the process and you end up with less of the stuff that gets you high. Sam Skunkman's mentioned he uses plants that have been dried for 6 months to make his 99.9% dry sift.

To speed up the process, at the expense of quantity while achieving a similar result, is to stop carding when for example only 50% of the rough sift has been carded or vibrated through the 107 micron screen as the heavier, rounder trichomes tend to pass through at a greater rate initially than the rough shaped lighter weight bits of broken plant matter. Then work this sift over the 70 micron mesh.

Another way is to work the rough sift over the 107 micron mesh, when about 80% has passed through, stop, clean the 107 micron screen by upturning off at the side and tapping it out to get rid of any bits of contaminant in or on the mesh and then re-sift the hash that has passed through the same 107 mesh again, stopping when about 80% has passed through the mesh..doing this should leave you with a slightly cleaner sift....then work the sift over the 70 micron mesh.

Happy Sifting!

[rasras]

Originally Posted by midwestHIGHS

Anyone ever dab fullmelt drysift on ti or quartz?

Im big fan of dabbing drysift on ti. Its easy way to see how potent your drysift/strain is. If your drysift does have some legs etc they just stays in your nail after head has bubble away. Love it! How i do it: I like to make small paddle and dab that to red nail. Mi-cro-dab`s


Fresh/just dried material gives most flavor in my view, but it need to be process in extremely cold temperatures that way your resin head`s dont need to dry out first.

Give thanx to B-man for sharing this.

[gaiusmarius]

awesome job, thanks for sharing. hope you don't mind i embedded the youtube link. that is some amazingly bubbly dry sift!

[CannabisTHC]

Oh so this is what you were trying to explain to me in chat when you were in Amsterdam, didn't realize how much processing needed to be done to make full melt dry sift. Makes me want one of your bubble box's might have to pick one up. Thanks for the tutorial!