help with first weed donut please - Vertical / Colosseum Growing - International Cannagraphic Magazine Forums

Maina · 01-06-2013, 11:54 PM

Well I'm going to give this a try. I hope I'm doing this right.there is 4 ,45 gallon smart pots in a pod .the base. Is 6x6 just to hold the pots.now the frame is 8 feet tall. I took the scrog fencing and cut it like 12 feet long then took it end to end. Now its a 5 feet across. And 8 feet high. The screen sets inside the pod 1 foot above pots.the screen. Is tied/ wired to the 2x4 frame So this is my screen donut. The plants are on the inside edge of the screen wired flat out like a turkey fan. The screen is full all around and 4 feet high.she is full.veg is being dun with a 1000 mh. Flower there will be 2 1000 ups.maybe 3 stacked. I see a lot of guys have the plants on the out side of screen,I don't get it.

Maina · 01-06-2013, 11:57 PM

I want all the wire covered. By plant. .8 high 5 feet across. Should be full in another 30 days

Maina · 01-06-2013, 11:59 PM

Oh yea height of room 12 feet

Mister_D · 01-07-2013, 12:57 AM

So what's your question?

Maina · 01-07-2013, 01:06 AM

My plants are on the inside of screen. Not the out side is this wrong

Jnugg · 01-07-2013, 01:27 AM

Pics?

**exploziv** · 01-07-2013, 01:30 AM

I'm not an expert at this by any means but here's my try to answer:

How much time it will take you to keep the shoots/tops away from the bulbs and close or tied to the screen? Instead of just taking care of the occasional rebel shoot that goes to the other side of the screen searching for more light.

Grizz · 01-07-2013, 01:49 AM

M you should be fine as long as you have a suffecent fan under your stacked bare bulbs, all mine are inside the screen and tied like you mentioned, some buds are within 6in of the bulb and there is no burn or bleaching, sounds like yours could get alittle over crowded though

Maina · 01-07-2013, 01:56 AM

I have blowers sucking the heat of the bulbs over pods.

Maina · 01-07-2013, 01:59 AM

Well I will be cutting out suckers and leaving main arms. Thinking that will hold back crowding Avery bud will have its own area. No overlapping or crowding.

01-06-2013, 11:54 PM	#1
Maina Senior Member Join Date: Feb 2010 Posts: 1,283	help with first weed donut please Well I'm going to give this a try. I hope I'm doing this right.there is 4 ,45 gallon smart pots in a pod .the base. Is 6x6 just to hold the pots.now the frame is 8 feet tall. I took the scrog fencing and cut it like 12 feet long then took it end to end. Now its a 5 feet across. And 8 feet high. The screen sets inside the pod 1 foot above pots.the screen. Is tied/ wired to the 2x4 frame So this is my screen donut. The plants are on the inside edge of the screen wired flat out like a turkey fan. The screen is full all around and 4 feet high.she is full.veg is being dun with a 1000 mh. Flower there will be 2 1000 ups.maybe 3 stacked. I see a lot of guys have the plants on the out side of screen,I don't get it.
	Quote

01-06-2013, 11:57 PM	#2
Maina Senior Member Join Date: Feb 2010 Posts: 1,283	I want all the wire covered. By plant. .8 high 5 feet across. Should be full in another 30 days
	Quote

01-06-2013, 11:59 PM	#3
Maina Senior Member Join Date: Feb 2010 Posts: 1,283	Oh yea height of room 12 feet
	Quote

01-07-2013, 12:57 AM	#4
Mister_D Senior Member Join Date: Mar 2011 Posts: 3,381	So what's your question? __________________ Satori F2 Vert Grow (Completed) https://www.icmag.com/ic/showthread.php?t=213034 D's Vertical Redemption (Completed) https://www.icmag.com/ic/showthread....57#post4840157 D's Gone Hunting (In limbo) https://www.icmag.com/ic/showthread....=1#post5941311 Cannafornia Seeds Caliente Kong & Alaskan Thunder Kong Test Thread (Completed) https://www.icmag.com/ic/showthread....15#post6280215 D's DIY Automated Vertical Feed and Drain System https://www.icmag.com/ic/showthread....90#post6323290 ""Get It Fucking Done. It’s the truth, it’s the one thing you learn real fast in life is that nobody gives a fucking shit about excuses and the sooner you learn that nobody really gives a fuck about you, that you need to get off your ass and make shit happen then the better off everyone will be""". - Zakk Wylde
	Quote 1 members found this post helpful.

01-07-2013, 01:06 AM	#5
Maina Senior Member Join Date: Feb 2010 Posts: 1,283	My plants are on the inside of screen. Not the out side is this wrong
	Quote

01-07-2013, 01:27 AM	#6
Jnugg Senior Member Join Date: Feb 2006 Location: S.E. USA Posts: 1,720	Pics? __________________ Jnugg Converts & Goes Vertical Organic Tea Party w/ The Rev. Ventilation 101
	Quote

01-07-2013, 01:30 AM	#7
exploziv pure dynamite Join Date: Sep 2006 Posts: 20,173	I'm not an expert at this by any means but here's my try to answer: How much time it will take you to keep the shoots/tops away from the bulbs and close or tied to the screen? Instead of just taking care of the occasional rebel shoot that goes to the other side of the screen searching for more light. __________________ "We ought never do wrong when people are looking." - Mark Twain If the whole world smoked a joint at the same time, there would be world peace for at least two hours. Followed by a global food shortage.
	Quote

01-07-2013, 01:49 AM	#8
Grizz Senior Member Join Date: Feb 2008 Location: down in Mexico killing red legs Posts: 15,275	M you should be fine as long as you have a suffecent fan under your stacked bare bulbs, all mine are inside the screen and tied like you mentioned, some buds are within 6in of the bulb and there is no burn or bleaching, sounds like yours could get alittle over crowded though __________________ proud user of PERFECT GROWER NUTRIENTS
	Quote

01-07-2013, 01:56 AM	#9
Maina Senior Member Join Date: Feb 2010 Posts: 1,283	I have blowers sucking the heat of the bulbs over pods.
	Quote

01-07-2013, 01:59 AM	#10
Maina Senior Member Join Date: Feb 2010 Posts: 1,283	Well I will be cutting out suckers and leaving main arms. Thinking that will hold back crowding Avery bud will have its own area. No overlapping or crowding.
	Quote