By far and without a doubt, the least expensive conventional, synthetic fertilizers - Page 30 - Nutrients and Fertilizers - International Cannagraphic Magazine Forums

nastynate420 · 04-02-2016, 06:51 AM

I've got a quick question for people using the jacks hydro and calcnit. I'm running at 600 ppm in straight coco. I use ro'd water and once mixed at a 1:.667 ratio I come out with a ph of 5.3. Do people add ph up or just leave it as is?

2000pm · 04-02-2016, 08:33 AM

Fwiw mine comes out to 6.0 and I ph down to 5.8 at the same ratio but with tap water coming out at 30ppm. Also running more around 700ppm total.

nastynate420 · 04-02-2016, 08:21 PM

Does it matter what I'm using to ph with? I've noticed that my general hydroponics ph up adds about 30-40 ppm per gallon. The ph up isn't going to lock anything out by adding nutrients is it?

McKush · 04-02-2016, 09:44 PM

My rodi is around 5.9 or 6.0. I mix jacks 5 12 26 + calcnit to 600ppm and get 5.4 to 5.6. Ive been adding 2mil/gal of SM90 which brings me back to 5.9 to 6.0. May stop the SM90 tho to check and see how it works for me again. Not sure

Lesterburnum · 11-20-2016, 11:58 PM

Good stuff here. Thanks everyone.
I just switched to dyna foliar pro. But only available in gallons come to find out. And not the cheapest. Still cheaper than the canna I've been using.
Gonna give the jacks a whirl.

guido420 · 01-29-2018, 10:30 PM

Quote:

Originally Posted by brainzfuxed

Anyone know where to get just jugs of 1 pound mixes? One gallon as it is would last me way too long

https://customhydronutrients.com/

Great Service and Shipping is fast......

However, HOWEVER..they do not carry Jacks per se... Long Story short, JR Peters sold versions of their formula as OEM for PETERS professional Line. Everris ICL currently distribute it through AG companies in 25lb bags.

I have used the Peter's Professional 5-11-26 with the same 3-2-1 mixology with damn good results.

The version CHN carries may be the old SKU with 4% Sulphur. The new version is with 8% Sulphur. Closer to the actual Jack's Version.

Welcome to the Rabbit Hole....enjoy the trip.

Guido420
@yetigrow on Instagram

nxsov180db · 02-01-2018, 10:55 AM

Quote:

Originally Posted by guido420

https://customhydronutrients.com/

Great Service and Shipping is fast......

However, HOWEVER..they do not carry Jacks per se... Long Story short, JR Peters sold versions of their formula as OEM for PETERS professional Line. Everris ICL currently distribute it through AG companies in 25lb bags.

I have used the Peter's Professional 5-11-26 with the same 3-2-1 mixology with damn good results.

The version CHN carries may be the old SKU with 4% Sulphur. The new version is with 8% Sulphur. Closer to the actual Jack's Version.

Welcome to the Rabbit Hole....enjoy the trip.

Guido420
@yetigrow on Instagram

CHN doesn't care the 5-11-26 anymore.

Edit: sorry I was thinking of Hydro-Gardens not carrying the 5-11-26 anymore, long night..

bilko · 02-01-2018, 05:17 PM

-

zeke99 · 03-08-2018, 06:46 PM

I don't know if this is *new* per se, but I haven't noticed it before. On the JRPeters website

16-4-17 Hydro FeED
Description & Key Benefits
An innovative formula that provides all the macro, secondary and micronutrients in a one-part system. Designed specially for hydroponically grown herbs (basil, cilantro, chives, parsley etc.), as well as, lettuce and most vegetables. Includes our proprietary blend of iron chelates that keeps iron available even as the pH varies up to a high of 8.0. Also contains a significant level of soluble calcium and magnesium, for an all-around plant nutrition.

For the same formula available in our professional size, check out Oasis Hydroponic

For use on
All plants being grown hydroponically.

AgentPothead · 03-08-2018, 07:21 PM

I just started reading this thread but holy cow, those Peter's Professional nutrients are very cheap compared to the Canna stuff I was using.

04-02-2016, 08:33 AM	#292
2000pm Member Join Date: Oct 2008 Location: Kaskadia Posts: 467	Fwiw mine comes out to 6.0 and I ph down to 5.8 at the same ratio but with tap water coming out at 30ppm. Also running more around 700ppm total.
	Quote 1 members found this post helpful.

04-02-2016, 09:44 PM	#294
McKush Éirinn go Brách Join Date: Sep 2013 Location: In the backwoods, by the rivers of my memory Posts: 2,049	My rodi is around 5.9 or 6.0. I mix jacks 5 12 26 + calcnit to 600ppm and get 5.4 to 5.6. Ive been adding 2mil/gal of SM90 which brings me back to 5.9 to 6.0. May stop the SM90 tho to check and see how it works for me again. Not sure __________________ H. B. McKush Be kind, for everyone you meet is fighting a hard battle.
	Quote

02-01-2018, 05:17 PM	#298
bilko Member Join Date: Jan 2018 Location: above the clouds Posts: 101	- Last edited by bilko; 03-03-2018 at 07:59 AM..
	Quote

03-08-2018, 06:46 PM	#299
zeke99 Member Join Date: Dec 2010 Posts: 567	I don't know if this is new per se, but I haven't noticed it before. On the JRPeters website 16-4-17 Hydro FeED Description & Key Benefits An innovative formula that provides all the macro, secondary and micronutrients in a one-part system. Designed specially for hydroponically grown herbs (basil, cilantro, chives, parsley etc.), as well as, lettuce and most vegetables. Includes our proprietary blend of iron chelates that keeps iron available even as the pH varies up to a high of 8.0. Also contains a significant level of soluble calcium and magnesium, for an all-around plant nutrition. For the same formula available in our professional size, check out Oasis Hydroponic For use on All plants being grown hydroponically. __________________ current grow: https://www.icmag.com/ic/showthread.php?t=342108
	Quote

03-08-2018, 07:21 PM	#300
AgentPothead Member Join Date: Jun 2017 Location: Grassachusetts Posts: 568	I just started reading this thread but holy cow, those Peter's Professional nutrients are very cheap compared to the Canna stuff I was using. __________________ You may not vote on any more threads today. Don't sweat the technique.
	Quote

04-02-2016, 06:51 AM	#291
nastynate420 Member Join Date: Jan 2014 Location: CO Posts: 185	I've got a quick question for people using the jacks hydro and calcnit. I'm running at 600 ppm in straight coco. I use ro'd water and once mixed at a 1:.667 ratio I come out with a ph of 5.3. Do people add ph up or just leave it as is?
	Quote

04-02-2016, 08:21 PM	#293
nastynate420 Member Join Date: Jan 2014 Location: CO Posts: 185	Does it matter what I'm using to ph with? I've noticed that my general hydroponics ph up adds about 30-40 ppm per gallon. The ph up isn't going to lock anything out by adding nutrients is it?
	Quote

11-20-2016, 11:58 PM	#295
Lesterburnum Member Join Date: Feb 2013 Posts: 186	Good stuff here. Thanks everyone. I just switched to dyna foliar pro. But only available in gallons come to find out. And not the cheapest. Still cheaper than the canna I've been using. Gonna give the jacks a whirl.
	Quote