Aero system? - Vertical / Colosseum Growing - International Cannagraphic Magazine Forums

Mr G · 07-27-2009, 09:55 AM

Does anyone know of a good aero system like this

07-27-2009, 11:30 PM

Not sure if you are looking for a guide to building one or to buy an already made unit. That one looks like it could easily be built from PVC pipe and fittings from the local hardware store.

There's builds posted here that are very similar to that.

Mr G · 07-28-2009, 07:13 AM

Ya I was planning on building one, but those 3" pvc wye pieces are around 3 bucks each!! Has anyone built one like this? i've seen the octagon shaped pvc ones but not up and down like these columns.

growshower · 07-28-2009, 07:25 AM

yeah google the aerofalls unit, similar, i have a thread on it, would love to see someone do it, i don't have the space, all my rooms are full

Power13 · 07-28-2009, 07:35 AM

You don't have to use wyes. Long pieces of pvc would work fine. You can use a 2" hole, and neoprene covers. Only thing left would be a support system for the plant.

07-28-2009, 08:48 AM

This should help:
https://www.icmag.com/ic/showthread.php?t=17863

I've also seen one where they didn't use the wyes and just drilled holes into the PVC for the net pots. Cutting the corner of the pot allows them to tip upright a little.

Mr G · 07-29-2009, 07:25 AM

exactly what i was looking for squirrel. you da man!
I thought about just using straight pvc pipe but I was worried about leaks. I really want to try this vertical setup but i'm worried about how much it will cost to operate

07-27-2009, 09:55 AM	#1
Mr G Member Join Date: Mar 2009 Posts: 33	Aero system? Does anyone know of a good aero system like this
	Quote

07-27-2009, 11:30 PM	#2
squirrelfooker Guest Posts: n/a	Not sure if you are looking for a guide to building one or to buy an already made unit. That one looks like it could easily be built from PVC pipe and fittings from the local hardware store. There's builds posted here that are very similar to that.
	Quote

07-28-2009, 07:13 AM	#3
Mr G Member Join Date: Mar 2009 Posts: 33	Ya I was planning on building one, but those 3" pvc wye pieces are around 3 bucks each!! Has anyone built one like this? i've seen the octagon shaped pvc ones but not up and down like these columns.
	Quote

07-28-2009, 07:25 AM	#4
growshower Keepin buddies higher than giraffe pussy since 99 Join Date: Jun 2009 Location: Pappa Johnny Road Posts: 548	yeah google the aerofalls unit, similar, i have a thread on it, would love to see someone do it, i don't have the space, all my rooms are full __________________ Widespreadmotherfuckinpanic Like i told you what i said, steal your face right off your head......... Everything I say on here is a lie, I just want to look cool. is it working?
	Quote

07-28-2009, 07:35 AM	#5
Power13 Member Join Date: Oct 2008 Posts: 101	You don't have to use wyes. Long pieces of pvc would work fine. You can use a 2" hole, and neoprene covers. Only thing left would be a support system for the plant.
	Quote

07-28-2009, 08:48 AM	#6
squirrelfooker Guest Posts: n/a	This should help: https://www.icmag.com/ic/showthread.php?t=17863 I've also seen one where they didn't use the wyes and just drilled holes into the PVC for the net pots. Cutting the corner of the pot allows them to tip upright a little.
	Quote

07-29-2009, 07:25 AM	#7
Mr G Member Join Date: Mar 2009 Posts: 33	exactly what i was looking for squirrel. you da man! I thought about just using straight pvc pipe but I was worried about leaks. I really want to try this vertical setup but i'm worried about how much it will cost to operate
	Quote