G
Guest
So I hear you wanna learn about NFT.....Also I heard you wanna hear about Aeroponics. Well this is your lucky day! What we have here is a lil thread about both. Both you say? Yes both. But not side by side. Oh No! Then what you ask?......... Well what we have here is a Aero NFT hybrid. A Hydroponic Tube/Channel System fitted with Sprayers that deliver highly oxygenated nutrients over a plants root zone. It combines the Flow/Stream of nutrients from the NFT systems with the application of Sprayers/Misters to deliver the nutrient cocktail.
In no way is this my design
I was put onto NFT by a High Times article a few years back and built my own design from the plans given in the magazine. It has since been the best thing I have come across in growing. From then on I have been reading up on it and learning other ways people have applied it. I came across "Webfish's" thread on Webby Tubes on Cannabis World . It's from his design that he layed out there, that I have built mine. He has gone through all the trials and tribulations as to give me the proven results I am looking for. So I thank webfish for sharing with us his design. I am gonna take his design and do a miniature version for C-13 cabinet. Sound Like Fun? Yah I know.............
Parts List
(1) 4" ABS/PVC Pipe
(2) 4" 90º ABS/PVC Angles
(1) 1/2 PVC pipe
(2) 4" End Caps
(6) 1/2" Cobra Hoses (Blue)
(6) Roto Spinners (sprayers)
(6) 1/2" End Caps
(5) 1/2" T's (threaded angle)
(1) 1/2 90º Angle (One End Threaded)
(1) 10-24 Thread Tap
(1) Inline Filter
(1) Pump (633GPH)
(1) 4" Hole Saw
(1) 3" Hole Saw
(1) 1 1/8 Hole saw
(1) Teflon Tape
(1) 14 Gallon Rubbermaid
In no way is this my design
I was put onto NFT by a High Times article a few years back and built my own design from the plans given in the magazine. It has since been the best thing I have come across in growing. From then on I have been reading up on it and learning other ways people have applied it. I came across "Webfish's" thread on Webby Tubes on Cannabis World . It's from his design that he layed out there, that I have built mine. He has gone through all the trials and tribulations as to give me the proven results I am looking for. So I thank webfish for sharing with us his design. I am gonna take his design and do a miniature version for C-13 cabinet. Sound Like Fun? Yah I know.............
Parts List
(1) 4" ABS/PVC Pipe
(2) 4" 90º ABS/PVC Angles
(1) 1/2 PVC pipe
(2) 4" End Caps
(6) 1/2" Cobra Hoses (Blue)
(6) Roto Spinners (sprayers)
(6) 1/2" End Caps
(5) 1/2" T's (threaded angle)
(1) 1/2 90º Angle (One End Threaded)
(1) 10-24 Thread Tap
(1) Inline Filter
(1) Pump (633GPH)
(1) 4" Hole Saw
(1) 3" Hole Saw
(1) 1 1/8 Hole saw
(1) Teflon Tape
(1) 14 Gallon Rubbermaid