Stealth Flower Dresser + Hidden Clonecab - Growroom Designs & Equipment - International Cannagraphic Magazine Forums

stickyickyicky · 02-28-2009, 01:46 AM

I have been working on these on and off for awhile. Finally got them ready\working.

I built the clone cab as a mother cab. I had 4x42watt flowering 2600k CFLs. I got the mother large enough to take 8 clones (2-25-09). I put her into flower yesterday (2-26-09). Then switched out the heavy lights for more clone \small plant friendly ones.

here u can see i switched out the lights for 2x26watt 3500k + 2x26watt 6500k

Exhaust above the lights

intake below the shelf

light wiring

Hidden Cab location
unfinished basment room closet with no door

wall inside closet

latch holding the wall\door closed

3 bubbledust seeds and 8 trainwreck clones

stickyickyicky · 02-28-2009, 02:16 AM

here is a buy and build yourself dresser.

here is what happens when u dont built it to the instructions provided

very unnoticeable lock

lock from inside

What the drawers dont pull open???

open. (dont mind the mess - still setting up the inside at that point)

left door open

how the left door latches from the inside

right side lights and (durbon Posion DIY filter) mounded on the T-100x
from hvacquick.com (hidden) set to low speed 100cfm

left side lights

youcan see that i installed plexi glass under the lights.
The air comes in under the cab on the right and goes across it to the top of the leftside where there is a notch cut in the plexi at the wall. air then flows
over all the CFLS and into the box containing the scrubber and fan.
So all the air must travel across the lights before being exhausted under
the cab

under cab shot - i did add another peice of wood and diverted the hot
air out the bottom\side of the dresser and the intake with light trap sucks from the front.

Few shots of the mom train wreck i LST-ed and now has 3 large tops.

stink.whistler · 02-28-2009, 02:20 AM

You are lucky to have that hidden space in your basement closet!

Nice cab, will be interesting to see it progress.

g0dzilla · 02-28-2009, 02:22 AM

great work on these cabs.. thats a load of cfls in there.. gl on this run i bet you get some pretty buds...

stickyickyicky · 02-28-2009, 02:32 AM

Thanks fellas. Thanks!

My Idea is the pre-nup sog (dr.bud style) but i wanted to do the bubble dust first... i got a male BD the first try (thought i ordered the FEM but must of been retarted) . The trainwreck is FEM so i knew she was a girl so i took the clones and then flowered her so i get a decent amount when she finishes. ill either make one of the clones a new mother or plant another TW seed. when i get the results of the 3 BDs ill make one a mother and flower\chop the others. if the bds dont end up producing a female i might order some new seeds, prolly some blueberry or something with a purple bud.

iGro4Me · 02-28-2009, 02:35 AM

You've put alot of thought into this obviously.

How are your temps doing ?

Does the fact you can not move your lights closer to your grow hinder them in any way ?

Looks pretty good and real stealthy man.

Peace,

iGro

FreezerBoy · 02-28-2009, 02:37 AM

Where's the ejector seat for LEO? Stealth cabs. Secret doors. What's not to love? Thumbs up!

stickyickyicky · 02-28-2009, 03:00 AM

Quote:

Originally Posted by iGro4Me

How are your temps doing ?

Does the fact you can not move your lights closer to your grow hinder them in any way ?
iGro

Inside the wall\intake temp: 73
clone cabtemp: 80 (depending how close to the lights)
80 at the top 75 where they sit in the pic.

room temp:75 depending on my eclectic in room heater (basement is freezin this time of the year
flower cab temp:85-86 lights on
intake temp:75
exhaust: 96 with the 8 lights on 106 with all 14
I like the fact that you can put the plants all the way up on a box and can lower as they stretch. cuz they really wont burn because of the plexiglass

Quote:

Where's the ejector seat for LEO? Stealth cabs. Secret doors. What's not to love? Thumbs up!
freezerboy

damn man that is reassuring coming from you! i dont post much but i love your freezer grows + ideas!
Thanks man!

iGro4Me · 02-28-2009, 05:24 AM

Quote:

Originally Posted by stickyickyicky

Inside the wall\intake temp: 73
clone cabtemp: 80 (depending how close to the lights)
80 at the top 75 where they sit in the pic.

room temp:75 depending on my eclectic in room heater (basement is freezin this time of the year
flower cab temp:85-86 lights on
intake temp:75
exhaust: 96 with the 8 lights on 106 with all 14
I like the fact that you can put the plants all the way up on a box and can lower as they stretch. cuz they really wont burn because of the plexiglass

damn man that is reassuring coming from you! i dont post much but i love your freezer grows + ideas!
Thanks man!

Thats awesome man....I don't know what I was thinking about you not being able to get the lights closer....Get bigger box!

My bad, great job.

Peace,

iGro

polish400 · 08-13-2009, 04:31 AM

Thanks for letting me rock your old cab!

02-28-2009, 01:46 AM	#1
stickyickyicky This is WEED college... Join Date: Aug 2006 Posts: 343	Stealth Flower Dresser + Hidden Clonecab I have been working on these on and off for awhile. Finally got them ready\working. I built the clone cab as a mother cab. I had 4x42watt flowering 2600k CFLs. I got the mother large enough to take 8 clones (2-25-09). I put her into flower yesterday (2-26-09). Then switched out the heavy lights for more clone \small plant friendly ones. here u can see i switched out the lights for 2x26watt 3500k + 2x26watt 6500k Exhaust above the lights intake below the shelf light wiring Hidden Cab location unfinished basment room closet with no door wall inside closet latch holding the wall\door closed 3 bubbledust seeds and 8 trainwreck clones __________________ Sticky's Micro GROW PC FAN - 19volt laptop converter Sticky's Stealth dresser and hidden clonecab Sticky murders clones *(M.U.R.D.A.)MEMBER*
	Quote

02-28-2009, 02:16 AM	#2
stickyickyicky This is WEED college... Join Date: Aug 2006 Posts: 343	Stealth Dresser here is a buy and build yourself dresser. here is what happens when u dont built it to the instructions provided very unnoticeable lock lock from inside What the drawers dont pull open??? open. (dont mind the mess - still setting up the inside at that point) left door open how the left door latches from the inside right side lights and (durbon Posion DIY filter) mounded on the T-100x from hvacquick.com (hidden) set to low speed 100cfm left side lights youcan see that i installed plexi glass under the lights. The air comes in under the cab on the right and goes across it to the top of the leftside where there is a notch cut in the plexi at the wall. air then flows over all the CFLS and into the box containing the scrubber and fan. So all the air must travel across the lights before being exhausted under the cab under cab shot - i did add another peice of wood and diverted the hot air out the bottom\side of the dresser and the intake with light trap sucks from the front. Few shots of the mom train wreck i LST-ed and now has 3 large tops. __________________ Sticky's Micro GROW PC FAN - 19volt laptop converter Sticky's Stealth dresser and hidden clonecab Sticky murders clones *(M.U.R.D.A.)MEMBER*
	Quote

02-28-2009, 02:32 AM	#5
stickyickyicky This is WEED college... Join Date: Aug 2006 Posts: 343	Thanks fellas. Thanks! My Idea is the pre-nup sog (dr.bud style) but i wanted to do the bubble dust first... i got a male BD the first try (thought i ordered the FEM but must of been retarted) . The trainwreck is FEM so i knew she was a girl so i took the clones and then flowered her so i get a decent amount when she finishes. ill either make one of the clones a new mother or plant another TW seed. when i get the results of the 3 BDs ill make one a mother and flower\chop the others. if the bds dont end up producing a female i might order some new seeds, prolly some blueberry or something with a purple bud. __________________ Sticky's Micro GROW PC FAN - 19volt laptop converter Sticky's Stealth dresser and hidden clonecab Sticky murders clones *(M.U.R.D.A.)MEMBER*
	Quote

02-28-2009, 02:37 AM	#7
FreezerBoy Was blind but now IC Puckbunny in Training Join Date: Dec 2007 Posts: 11,517	Where's the ejector seat for LEO? Stealth cabs. Secret doors. What's not to love? Thumbs up! __________________ . . FreezerBoy's Destroyer Diary-Completed...... FreezerBoy's Thunk Diary-Completed...... Beginners Links
	Quote

02-28-2009, 02:20 AM	#3
stink.whistler Member Join Date: Feb 2009 Location: right 'chear Posts: 576	You are lucky to have that hidden space in your basement closet! Nice cab, will be interesting to see it progress.
	Quote

02-28-2009, 02:22 AM	#4
g0dzilla Member Join Date: Jan 2009 Posts: 365	great work on these cabs.. thats a load of cfls in there.. gl on this run i bet you get some pretty buds...
	Quote

02-28-2009, 02:35 AM	#6
iGro4Me The Hopeful Protagonist Join Date: Feb 2009 Location: In the dark, with a heightened sense of touch Posts: 2,861	You've put alot of thought into this obviously. How are your temps doing ? Does the fact you can not move your lights closer to your grow hinder them in any way ? Looks pretty good and real stealthy man. Peace, iGro
	Quote

08-13-2009, 04:31 AM	#10
polish400 Member Join Date: Aug 2009 Posts: 64	Thanks for letting me rock your old cab!
	Quote