Promix HP and AN nutes? - AN Forum Displaced Members - International Cannagraphic Magazine Forums

Koskesh · 10-16-2008, 05:40 PM

Thinking of switching to AN, not sure which base to use for straight promix HP for best yields.. they have so many additives, I don't think I need them all but judging from what I've read some of them are really popular, and since I'm not a nute pro I wouldn't even know which ones go well together, etc. Frying is bad, mmkay

Maybe one of their base plus B1, sensi cal, carboload, big bud - but then there's also overdrive, bud blood, barricade, voodoo... seems like using all of them might do more harm than good, at least at full strength. Any help would be appreciated, I wouldn't want to rely on a salesperson lol

MysteryMachine · 10-16-2008, 10:41 PM

I would use either the 3 part or connie for a base, then calmag, bigbud and overdrive thats all you need.

Koskesh · 10-16-2008, 11:17 PM

Thanks. Would you use the 3 part at 1-1-1 as AN suggests? Seems a little off using the same ratio through veg and flowering... connie is too expensive lol I don't want to spend 3k a year on nutes

10-16-2008, 11:18 PM

conni a & B big bud over drive carbo load

imo sensi a & b offer no benefit over gh or other bases

1 gallon each of conni a & b has feed 50 plants for a harvest and the bottles are at least half full AND it was still to aggressive

its much stronger than sensi a & b in promix i use 50 mil per 5 gallons max

i used it the day i put the girls in 12.12

I only vegged 10 days of because i know connie causes mad stretch and I figured let em stretch just flip em early and save some time worked liek a charm

Koskesh · 10-16-2008, 11:23 PM

nobody use B1? or does one of these take care of that

Koskesh · 10-16-2008, 11:38 PM

Thanks for the replies at any rate. So far from what I've read and from your replies I'll probably use Promix HP with added perlite and a bit of lime.

Definitely Big Bud, Overdrive, Carboload, and some cal-mag when it's needed - do I even need cal-mag if using the 3part? If so wtf is in the micro bottle lol

Given that my medium is devoid of nutrition, does that sound like a complete fert list? I'm reading that I should feed once a week, my pots tend to dry out after 2 days (8" pots I think are 4 liter, I give about 1L every watering). So I would be doing 1 feed and 2 plain waterings per week - that sound right?

I'll look for more threads about recommended dosage but am open to advice on that too

cheers

10-16-2008, 11:48 PM

im dropping carbo load and moving to mollassas

big bud and overdrive i used regularly

i like the conni if its not a bit $, I will be doing a side by side with GH lucas formula to see what teh differnetial and see if i can t emualte the conni with gh + mollassas adn some benefitials

Koskesh · 10-16-2008, 11:51 PM

Good to know about connie's strength, at that rate you're using like .04L per plant - which is about what I use of my present nutes - but they're shit lol https://www.optimum-hydroponix.com/ I use their AB and B1 and that's it. Best yield was .8gpw but they got too tall so lotsa popcorn from the waist down hehe

If connie causes even more strech, couldn't you just use veg nutes for the first bit of flowering? What would I use in veg btw

Koskesh · 10-17-2008, 12:00 AM

I would use molasses but I'm worried it will muck up my hoses after a while..I mix a big res and pump it to my wand through a garden hose - is carboload sticky lol

10-17-2008, 01:37 AM

https://www.icmag.com/ic/showthread.php?t=95688

this was conni

plus stadium setup and lst training

in the next couple days when i drop my new set of grils to do thier thing i intend to run em sdie by side

10-16-2008, 05:40 PM	#1
Koskesh Member Join Date: Oct 2008 Posts: 223	Promix HP and AN nutes? Thinking of switching to AN, not sure which base to use for straight promix HP for best yields.. they have so many additives, I don't think I need them all but judging from what I've read some of them are really popular, and since I'm not a nute pro I wouldn't even know which ones go well together, etc. Frying is bad, mmkay Maybe one of their base plus B1, sensi cal, carboload, big bud - but then there's also overdrive, bud blood, barricade, voodoo... seems like using all of them might do more harm than good, at least at full strength. Any help would be appreciated, I wouldn't want to rely on a salesperson lol

10-16-2008, 11:18 PM	#4
ureapwhatusow Guest Posts: n/a	conni a & B big bud over drive carbo load imo sensi a & b offer no benefit over gh or other bases 1 gallon each of conni a & b has feed 50 plants for a harvest and the bottles are at least half full AND it was still to aggressive its much stronger than sensi a & b in promix i use 50 mil per 5 gallons max i used it the day i put the girls in 12.12 I only vegged 10 days of because i know connie causes mad stretch and I figured let em stretch just flip em early and save some time worked liek a charm Last edited by ureapwhatusow; 10-16-2008 at 11:32 PM..

10-16-2008, 10:41 PM	#2
MysteryMachine Member Join Date: Jul 2007 Posts: 177	I would use either the 3 part or connie for a base, then calmag, bigbud and overdrive thats all you need.

10-16-2008, 11:17 PM	#3
Koskesh Member Join Date: Oct 2008 Posts: 223	Thanks. Would you use the 3 part at 1-1-1 as AN suggests? Seems a little off using the same ratio through veg and flowering... connie is too expensive lol I don't want to spend 3k a year on nutes

10-16-2008, 11:23 PM	#5
Koskesh Member Join Date: Oct 2008 Posts: 223	nobody use B1? or does one of these take care of that

10-16-2008, 11:38 PM	#6
Koskesh Member Join Date: Oct 2008 Posts: 223	Thanks for the replies at any rate. So far from what I've read and from your replies I'll probably use Promix HP with added perlite and a bit of lime. Definitely Big Bud, Overdrive, Carboload, and some cal-mag when it's needed - do I even need cal-mag if using the 3part? If so wtf is in the micro bottle lol Given that my medium is devoid of nutrition, does that sound like a complete fert list? I'm reading that I should feed once a week, my pots tend to dry out after 2 days (8" pots I think are 4 liter, I give about 1L every watering). So I would be doing 1 feed and 2 plain waterings per week - that sound right? I'll look for more threads about recommended dosage but am open to advice on that too cheers

10-16-2008, 11:48 PM	#7
ureapwhatusow Guest Posts: n/a	im dropping carbo load and moving to mollassas big bud and overdrive i used regularly i like the conni if its not a bit $, I will be doing a side by side with GH lucas formula to see what teh differnetial and see if i can t emualte the conni with gh + mollassas adn some benefitials

10-16-2008, 11:51 PM	#8
Koskesh Member Join Date: Oct 2008 Posts: 223	Good to know about connie's strength, at that rate you're using like .04L per plant - which is about what I use of my present nutes - but they're shit lol https://www.optimum-hydroponix.com/ I use their AB and B1 and that's it. Best yield was .8gpw but they got too tall so lotsa popcorn from the waist down hehe If connie causes even more strech, couldn't you just use veg nutes for the first bit of flowering? What would I use in veg btw

10-17-2008, 12:00 AM	#9
Koskesh Member Join Date: Oct 2008 Posts: 223	I would use molasses but I'm worried it will muck up my hoses after a while..I mix a big res and pump it to my wand through a garden hose - is carboload sticky lol

10-17-2008, 01:37 AM	#10
ureapwhatusow Guest Posts: n/a	https://www.icmag.com/ic/showthread.php?t=95688 this was conni plus stadium setup and lst training in the next couple days when i drop my new set of grils to do thier thing i intend to run em sdie by side