Register ICMag Forum Menu Features Search Today's Posts Mark Forums Read
You are viewing our:
in:
Forums > Marijuana Growing > Cannabis Growing Questions > Krypto's Ultimate Controler

Thread Title Search
Click to buy cannabis seeds at Ace Seeds
Post Reply
Krypto's Ultimate Controler Thread Tools Search this Thread
Old 10-27-2004, 07:58 PM #41
Guest
Guest

Posts: n/a
Attach three jumpers and three female connects to the negative lead of the cord. The last jumper in line does NOT have a female connect and is to be connected later on .


Quote


Old 10-27-2004, 07:59 PM #42
Guest
Guest

Posts: n/a
Feed your power cord through one of the holes in your container .

Quote


Old 10-27-2004, 08:02 PM #43
Guest
Guest

Posts: n/a
Attach a female connect to the positive lead on your outlets, feed them through the holes provided and snap them in place .




Quote


Old 10-27-2004, 08:06 PM #44
Guest
Guest

Posts: n/a
Mounting your timer.

On the timer you will see three holes that are used to mount the timer. Set the timer in place, mark and drill your holes.

This is where i should have drilled from the inside through.
That damn crack pisses me off. :tdown:



This is what it should look like when finished, "without the crack".




Quote


Old 10-27-2004, 08:10 PM #45
Guest
Guest

Posts: n/a
Take the positive leads from you pwoer supply cord and connect the first female connect to the number ONE position of the timer and the jumper to the number Five position on the timer .

Should look like this:

Quote


Old 10-27-2004, 08:22 PM #46
Guest
Guest

Posts: n/a
Quote:
Originally posted by Kryptonite
Attach three jumpers and three female connects to the negative lead of the cord. The last jumper in line does NOT have a female connect and is to be connected later on .
Take your negative lead and attach the first connection to the Timer #2 position, the second connection goes to the Relay A #8 position, the third conection is to be connected to the Relay B #8 position.

Now using the end of the lead "without the female connect" and attach it to Both Negative leads on your outlets. You can solder them together, twist em or whatever, just make SURE there is good contact and wrap them with some electrical tape.


Quote


Old 10-27-2004, 08:25 PM #47
Guest
Guest

Posts: n/a
Attach the Green common ground wire from the power supply cord to Both Common Ground wires of the outlets.

Should look like this:

Quote


Old 10-27-2004, 08:28 PM #48
Guest
Guest

Posts: n/a
It's a Beautful Day outside today and I have been sitting here for 3.5 hours working on this tutorial.
My ass fell to sleep and hour ago and I think it's about time to get something else done.
I have everything in order to finish this so I'll be back later on to do so.
This model is working like a Charm so if you have all the necessary pieces parts feel free to build up to this point.
Hava Good ONE!!!!!!!



Last edited by Kryptonite; 10-28-2004 at 04:36 AM..
Quote


Old 10-28-2004, 04:44 AM #49
Guest
Guest

Posts: n/a
Working from the top.
Take the lead with the jumpers "three female connects" from the top left switch and feed them through one of the pre-drilled holes.


Quote


Old 10-28-2004, 04:55 AM #50
Guest
Guest

Posts: n/a
Tip:
I use the needle nose pliers to crimp the ends of the female connects just enough to make a firm connection. Best done to all connects before beginning..

Each contact on the relays are numbered.

Now attach the first female connect on the lead to
Relay B #FIVE


Last edited by Kryptonite; 10-28-2004 at 05:56 AM..
Quote


Post Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT +2. The time now is 03:10 PM.


Click to visit Original Seed Store for great Cannabis genetics


This site is for educational and entertainment purposes only.
You must be of legal age to view ICmag and participate here.
All postings are the responsibility of their authors.
Powered by: vBulletin Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.