What are you thinking of adding?
Thanks for the write up on purging. My issue with purging the ethanol in the vac chamber is it pops bubbles all over the inside if the chamber and makes a mess. Do you have this problem? Or do you vac once you have evaporated most of the ethanol off?
This is a very interesting thread! I am days away from buying an extractor and I am so torn as what to get. Im on the fence because I like the ease of the Tamisium but I like the fact that with MKIII I can produce better. However I am a complete newbie and I just am not sure if I will know what I am doing with this set up verses the Tami. I guess my reason for posting was to ask if I am entry level and have zero idea as to how to extract what will be easier? I am very quick at catching on and I am very technical when needed but I do not want to devote a bunch of time to trial and error. I just want to make oil and go. So is the MKIII for me or the Tami?
Father Earth, have you come up with a method to heat the column? I am looking at a Greenlee heat blanket but am unsure how to throttle back the 300 degrees it heats up to. So basically once I find a way to control the heat blanket I'll pull the trigger and make the purchase.
Father Earth, have you come up with a method to heat the column? I am looking at a Greenlee heat blanket but am unsure how to throttle back the 300 degrees it heats up to. So basically once I find a way to control the heat blanket I'll pull the trigger and make the purchase.
use a thermostat such as this... http://www.amazon.com/RANCO-ETC-111000-Digital-Temperature-Control/dp/B0015NV5BE
wire the controller to a receptacle and use a power cord to power the ranco and recep