MICHAELPITO
Member
SETUP:
growbox 60x60x160
light spiderfarmer sf1000 100watt
quiet line extractor 90 cubic meters per hour
active carbon filter
sound absorbing pipelines
humidifier with hygrostat embedded
clip fan
coco cane professional plus substrate and perlite al 50/50
0.25l black plastic germination pot
1, 4 and 11 geotextile fabric maintenance pots liters (I also have a 16 liter but we will then see if use it instead of the 11)
nutrients advanced nutrients line senses coco ph perfect grow & bloom + voodoo juice, b52, overdrive & big bud.
DTW automatic irrigation system with black pipes
5, 8 and 30 litre solution storage black canisters.
air pump with porous stone
aquarium heater
run off recovery tray with 15 litre support grid to serve as saucer
22/11: It starts again!
- lights on 24/0 to 60cm to raise ambient temperature
- extractor on
- humidifier set to 70%
- fan on
- air pump with porous stone and heater 21 degrees lit in the jerrycan.
I sowed in 0.25 litre plastic pot in coconut and perlite mixed 50/50. I prepared the solution for the first week at full dosages provided by ADV in Lauretana water (water starting values ph 6/6.4 and ex 20) and pre fertilized the substrate before putting the seed, the rest I set aside in the jerrycan. The solution at the time of preparation measured ph 5.98 and ec 800 at a temperature of 20/21 degrees. Ambient temperature 21/23 degrees, humidity 70%.
24/11: After 48 hours the coconut started to dry on the surface, so I watered it from underneath with a saucer.
26/11: Germination.
growbox 60x60x160
light spiderfarmer sf1000 100watt
quiet line extractor 90 cubic meters per hour
active carbon filter
sound absorbing pipelines
humidifier with hygrostat embedded
clip fan
coco cane professional plus substrate and perlite al 50/50
0.25l black plastic germination pot
1, 4 and 11 geotextile fabric maintenance pots liters (I also have a 16 liter but we will then see if use it instead of the 11)
nutrients advanced nutrients line senses coco ph perfect grow & bloom + voodoo juice, b52, overdrive & big bud.
DTW automatic irrigation system with black pipes
5, 8 and 30 litre solution storage black canisters.
air pump with porous stone
aquarium heater
run off recovery tray with 15 litre support grid to serve as saucer
22/11: It starts again!
- lights on 24/0 to 60cm to raise ambient temperature
- extractor on
- humidifier set to 70%
- fan on
- air pump with porous stone and heater 21 degrees lit in the jerrycan.
I sowed in 0.25 litre plastic pot in coconut and perlite mixed 50/50. I prepared the solution for the first week at full dosages provided by ADV in Lauretana water (water starting values ph 6/6.4 and ex 20) and pre fertilized the substrate before putting the seed, the rest I set aside in the jerrycan. The solution at the time of preparation measured ph 5.98 and ec 800 at a temperature of 20/21 degrees. Ambient temperature 21/23 degrees, humidity 70%.
24/11: After 48 hours the coconut started to dry on the surface, so I watered it from underneath with a saucer.
26/11: Germination.
Attachments
Last edited:
