Sticky buds
Member
Hi, I am thinking of buying a mammoth G1 tent (110cm x 180cm x 240cm) with 15 x 5 gallon pots (30.5cm wide) (3 rows of 5) and using blumats.. I am hoping that three rows instead of two will not make it too difficult.. I was planning on running 8mm white tubing down to a T splitter over each row of 3 plants then running 3mm tubing Down to a 4 way splitter then a Y splitter at each plant with 2 carrots per pot.. Thing is the distance from the 4 way splitter will be longer for the outside row of plants.. Will this be too long a distance for 3mm tubing? Should I only use 1 carrot per pot with drippers? It is to be a gravity fed system and I noticed that they sell different kits for gravity fed systems so is that what I need? What's the difference? I don't think they supply a pressure reducer in the gravity fed kits but they do recommended using them in gravity fed systems so do I need a pressure reducer? What size rez would you guys recommend? How high Do I need to keep it? They recommend 3 feet apparently.. Is that above the ground or above plant level? Will it be OK to run the line into the inlet hole In the tent which seems very low and is on one side of the tent (not in the middle) or do I need to add another hole in the middle & higher in the tent? Thank you