Hi guys
I just need help with a couple of things before my setup is complete. I hope you guys can help a noob.
My grow room is: 57 cm. (1.87 feet) x 61 cm. (2 feet) x 120 cm. (3.4 feet).
ft²: 3,74.
The plan is to buy an oversized fan and dial it down as I want my grow room to be as silent as possible.
The fan will be placed in an insulated fan box. I will hang this fan box inside another bigger box which I place on top of my grow room. Does that make sense? [FONT="][/FONT]
Then the 4 x cobs LED (cxm22) and carbon filter will be inside the grow room with the plants.
Here comes the first question: is the size of the fan okay?
Solerpalau TD-500/150-160 SILENT. 550 m3/h (323 CFM).
It seems like this fan is very quiet which is why it seems interesting. I’m going to make a variac fan speed controller, so I can dial down the oversized fan down as I want no hum/noise. The fan is not going to run at full blast, perhaps at 40 % speed if that’s possible.
And the second question: how big should the filter be?
I am confused since I chose an oversized fan which is not going to run at full speed.
Which one of these carbon filters should I chose?
CarboAir 50 Carbon Filter 100/330mm 410m3/hr (241 CMF)
CarboAir 50 Carbon Filter 125/330mm 480m3/hr (282 CFM)
CarboAir 50 Carbon Filter 150/330mm 600m3/hr (353 CFM)
Thanks
Stuggy
I just need help with a couple of things before my setup is complete. I hope you guys can help a noob.
My grow room is: 57 cm. (1.87 feet) x 61 cm. (2 feet) x 120 cm. (3.4 feet).
ft²: 3,74.
The plan is to buy an oversized fan and dial it down as I want my grow room to be as silent as possible.
The fan will be placed in an insulated fan box. I will hang this fan box inside another bigger box which I place on top of my grow room. Does that make sense? [FONT="][/FONT]
Then the 4 x cobs LED (cxm22) and carbon filter will be inside the grow room with the plants.
Here comes the first question: is the size of the fan okay?
Solerpalau TD-500/150-160 SILENT. 550 m3/h (323 CFM).
It seems like this fan is very quiet which is why it seems interesting. I’m going to make a variac fan speed controller, so I can dial down the oversized fan down as I want no hum/noise. The fan is not going to run at full blast, perhaps at 40 % speed if that’s possible.
And the second question: how big should the filter be?
I am confused since I chose an oversized fan which is not going to run at full speed.
Which one of these carbon filters should I chose?
CarboAir 50 Carbon Filter 100/330mm 410m3/hr (241 CMF)
CarboAir 50 Carbon Filter 125/330mm 480m3/hr (282 CFM)
CarboAir 50 Carbon Filter 150/330mm 600m3/hr (353 CFM)
Thanks
Stuggy