I'm not sure its the proper way for my question to open a new thread,but honestly i never was a too active member on any forums, i just googled th information i need but now i planing to built my first sealed grow room and i haven't found similar setups like the one in my mind. But i would be happy if guys or girls whose has more experience with setup like thiis would add a few thought where im wrong etc.
So my idea is to use my wine cellar end for the project, it has a very high humidity obviously. The temperiture is about 15°C in the hottest days of the summer,in the winter if its really cold it can drop to 5°C. I would make a room out of OSB boards(8 or 10mm thick),two layers an d beetwen them rockwool for insulation. Strong white foliage on the inside wall to make sure nothing goes in or out.The size of the room would be 3m x 3m and 2.2m in height. For the first run i would use two 600w hps with cooltubes and the cooltubes would be ducted from one and to the nother so it could vent out most of the heat. I'm gonna setup a 3.2kw split clima but i hope its not going to run too much, so theres gonna be a dehumidifier with 16l/day capacity.If heating needed i have a 2.7kw oil radiator with a thermostat. For the smell i planing to use an 1500m3/h carbon filter on a dimmable 2500m3/h fan. For the co2 i would use a standard timer to dose when the lights on. Whats y'all opinions on this setup? is it overthinked a bit or im gonna have problems with the heat, humidity or anything im not thought about?
So my idea is to use my wine cellar end for the project, it has a very high humidity obviously. The temperiture is about 15°C in the hottest days of the summer,in the winter if its really cold it can drop to 5°C. I would make a room out of OSB boards(8 or 10mm thick),two layers an d beetwen them rockwool for insulation. Strong white foliage on the inside wall to make sure nothing goes in or out.The size of the room would be 3m x 3m and 2.2m in height. For the first run i would use two 600w hps with cooltubes and the cooltubes would be ducted from one and to the nother so it could vent out most of the heat. I'm gonna setup a 3.2kw split clima but i hope its not going to run too much, so theres gonna be a dehumidifier with 16l/day capacity.If heating needed i have a 2.7kw oil radiator with a thermostat. For the smell i planing to use an 1500m3/h carbon filter on a dimmable 2500m3/h fan. For the co2 i would use a standard timer to dose when the lights on. Whats y'all opinions on this setup? is it overthinked a bit or im gonna have problems with the heat, humidity or anything im not thought about?