Register ICMag Forum Menu Features Search Today's Posts Mark Forums Read
You are viewing our:
Forums > Marijuana Growing > Indoor Grows - Soil > ALL ABOUT BONSAI MOMS/MUMS

Thread Title Search
Click for great deals at MB Ferts
Post Reply
ALL ABOUT BONSAI MOMS/MUMS Thread Tools Search this Thread
Old 07-21-2006, 06:27 AM #1

Posts: n/a

This article was originally written by OG member Oldtimer1, and it has already been partially posted in the grow faq submissions thread but I feel it would be helpful to post the entire article with the pictures included. Hope somebody finds this and it helps

Part 1

This Article was originally published at 27/6/2000. Revised and archived 20/10/03 by Oldtimer1.
Now we will deal with every aspect of the care and maintenance of Mums including root and branch pruning as well as the renovation on an old mother well past her sell by date.

"Tired of huge unwieldy mothers that take up too much space? As I've shown before, a fully established bonsai mum only takes 8 inches x 8 inches."

This bonsai mother, if well fed, produce 10 to 30 good cuttings every 14 days under an HID or every 20 days under fluorescent shop light. This means a 4 ft x 2 ft shoplight with 18 Mums, could produce an output of over 9500 cuttings a year.

Typical Bonsai Mum

We are not talking about intensive production here but it shows just how flexible and efficient the system can be. What it does for the connoisseur is allow them to keep a good selection of varieties in a relatively small space. If you don't fancy growing one for 6 months or a year it doesn't matter. All she will need is regular maintenance.

Lets start with Mumming up a plant from a rooted cutting, once again this is simple. You will find that with every batch of cuttings a few will stand out, being sturdier and generally looking better all round, pick one or two of these to make your Mums, not some wimpy left over reject. Remember this mum will provide you with cuttings 4 to 18 times a year for the next 3 to 15 years, so only the best will do. Pick a fully rooted through cutting from the plug tray and pot on into a 2.5 inch square pot. I find square pots much easier to deal with when it comes to root pruning, as you will see later.

Grow it on for a few days so it can start rooting through then trim its top back to leave 3 or 4 side shoots.

These little branches to be will make the main framework of your Mum. Ideally as they grow they should form an open cup shape. The top 2 will grow the fastest and when they get to about 5 inches pinch or snip out their growing tips to just above a leaf node. This will allow the second pair to catch up in a day or so, then pinch them out as well. This will encourage side shoots to form, any that grow into the central cup shaped space pinch out.

You will now have 6 to 8 leading shoots coming up. When they reach 4 to 6 inches they can be taken as your first set of cuttings. You cut them back to just above the first leaf node of the new growth. So after the cuttings have been taken the mum is only a tiny bit larger than the last time she was cut back but the main branches will be starting to get thicker.

Now is the time to move up to the next pot size and a 3 inch sq is ideal. The next set of leading shoots will tend to be 12 to 16, plus there will be others coming up from lower nodes so in total there may be 30 or more. Any really thin ones or any growing into the centre either cut back to one node or remove altogether.

In the picture above from the left:- [one], is the trimmed cutting from above. [two], Has had 2 sets of cuttings taken off and is more than ready to move to a 3 inch pot. As you can see it is a little short of N showing its better to move after only taking one set of cuttings. [three] in a 3 inch pot 12 cuttings have been taken with 2 left on to show where to cut back to. [four] is a five year old Mum that has just had 32 cuttings taken off and could do with some more small twiggy bits removed. She is in a 1 litre pot and has been since she was 3 months old.

Note how all have an open centre, this allows light to both the centre and the outside. It will fill in between taking cuttings but if pruned back to this form, makes better and more even growth giving more good cuttings each time. Water only is used while forming the Mums and no fertiliser. It is not until they are in their final 1 litre pots and a set or two of cuttings have been taken that feeding starts.

The general care and maintenance for fully formed mother plants.

The Mums need just enough fertiliser to keep them healthy. Feed of half strength fertiliser twice a month, using say a 6-2-4 fish mix as about right [its not critical]! This keeps them in good general health but doesn't over feed them. If you want faster production at any point change to a full strength feed once or twice. Every 2 to 4 weeks a new batch of cuttings are taken even if they are not needed and just put in the worm bin. You can think of it as being like having to mow the lawn and keeps the mum the same size and form for years. Because so much is taken away they can get short of macro nutrients so every month or so give them a foliar spray using maxicrop. Judge this by how the plants are looking not by a time table.

One of the main things that all growers need to learn is regular close observation. To know when they are healthy and need nothing to the first signs of deficiencies appearing. The one thing they may run short of is magnesium even if dolomite lime is used in the compost, this is easily dealt with by one watering plus a foliar spray, using 1 ounce of Epsom salts dissolved in a gallon of water.

They will need root pruning once or twice a year. This depends on how intensively they are fed and how good your water quality is. Despite what is normally quoted it is virtually impossible to flush out salt build up from a root ball. A temporary over fertilisation yes but the gradual crystallisation of salts and carbonate deposits no! If your water supply is heavily contaminated with minerals I recommend a small Reverse-Osmosis filter to clean your water for both your Mums and your production plants.


"Now root pruning and Mum renovation. "

The method of root pruning is the same for routine maintenance or renovation.

Here we are dealing with a 7 year-old mum that hasn't been root trimmed for nearly a year. I have deliberately neglected her for the last 10 weeks for purposes of showing you the recovery. She has been on a diet of R/O water only, no other feed of any sort. This is to show you how tough Cannabis is and how far you can let things slide and still get a mum back into productivity. Its not a recommended practice and continual abuse like this will eventually kill a mum.

As you can see there is little residual fertiliser left in the compost. It is what we call spent (worn out). The first thing we do is trim back nearly all the top growth back to the main framework branches. Leaving one or two tiny shoots at the tip of each branch to draw sap and keep the branch alive. If all the shoots and buds are removed, 99 times out of a 100 die back sets in-- and once that starts the whole plant usually dies within a month or two. It doesn't matter if the small shoots are yellow from lacking N, they will soon start to grow and green up as the new roots start forming!

Next the rootball should have 3/4 of an inch cut off each side and an inch off the bottom. This reduces the 4.5 x 4.5 x 4.5 inch rootball to 3 x 3 x 3.5 inches high after the loose compost is scraped from the top. This means that two-thirds of the soil is being replaced. A good full strength organic compost is used when repotting and it only takes a day or two for the roots to really start growing into the new compost.

Set the bottom of the rootball on about 3/4 of an inch of compost then pack out the sides and finally cover the top with a 1/4 to 3/8 of an inch. This means the mum is planted round a 1/4 inch deeper every time root pruning is done about 1/2 an inch a year. In a couple of years from now I will cut down vertically and split the plant in two as the side branch will have a root system of its own. Using this method the roots are constantly being replaced and as well the main trunk replaced slowly. This seems to keep the Mums healthy for many years.

The second mother of our selected "ES" line lasted for just over 15 years using this method. Interestingly if you want to hold a plant long term in a small pot say a 2.5 inch sq this can be root pruned the same as the 1 litre plant but only taking off about 1/4 of an inch all round. I keep Dads in this pot size and some are over 5 years old.

NOTE: it is very important to make sure there are no voids or air gaps left when packing the sides, use a pencil or small dibber, fill slowly and firm lightly.

The last picture is 12 days after the root and top pruning- It tells it's own story! Already there are enough nice leaders to make 10 good cuttings. I have to admit to putting her under an sodium light to speed up her development and make this Issues deadline. Even so, the recovery wouldn't have taken much longer in the mum box.

Thats it you should have all the info you need to make and root cuttings in compost the make and maintain bonsai mother plants, its easy, give it a go! .

Last edited by guerilla1018; 07-21-2006 at 07:01 AM..

59 members found this post helpful.
Old 07-21-2006, 06:40 AM #2

Posts: n/a
thnx 1018

1 members found this post helpful.
Old 07-21-2006, 06:47 AM #3

Posts: n/a


"A lot of interest has been shown in the methods we use to keep mother plants, how we make them, manage them and how we do our cuttings production." - Oldtimer1 1999.
Article originally published at April 30 2000 this article is revised and archived 5/8/03

This issue we will we will cover our soft tip cuttings system in detail and a brief outline about our mother plants! Every grower can get the same results by imitating our easy organic system.

As an outline our mother plants are kept root restricted, i.e. using some standard bonsai methodology and techniques. It is an excellent method for keeping mother plants long term and has proved a very reliable system since we developed this method some 24 years ago. The longest a mother has lived like this without having to be replaced is just over 15 years. On average pure indicas need replacing every 3 years, hybrids every 4 to 5 years and pure sativas every 6 to 7 years! Of course it depends on the care they are given! Male plants can be kept in the same way and in fact will stand more abuse than mother plants.

Clone, Mum and Dad box.
Its a double deck with 2 times 4ft x 2 ft lights each with 4 x 40w coolwhite fl lights Close up of tray top left
270 rooted cuttings, in plugs ready to go into pots. Close up of top tray right
100 cuttings at the start of rooting.

One of the big advantages using bonsai mother plants, is that each only needs a maximum of 8 x 8 inches. So a 2 ft x 2 ft x 2 ft high box with a 4 tube fluorescent shoplight can hold 9 mothers. We call the plants we keep Mums and Dads! Not to be confused with chrysanthemums (that bit is for you Cha Cal).

Some of the quotes I have read in High Times saying that you get genetic degeneration by keeping mother plants long term, this is total rubbish!

Degeneration can certainly occur if a mother plant gets infected with a reversion virus. I will cover this later! The grass produced today from our mother plants is just as potent and smells just as good as when it was first grown out from seed many years ago. In fact it is better now, we have better lighting and superior growing techniques, allowing the clones to express their potential more fully.

I am going to start by showing you our largest mum, this time from above. She is in a 1-litre pot (the largest size used). With all the top growth pictured she is about 13 inches tall and ready to take cuttings. Inset is a cutting being clipped out see below.

The type we take are small soft tip cuttings, 2.5 to 3.5 inches long. It is important that there is no lignification at all. When I first discussed this with friends on the net some 3 years ago was with some disbelief, and a lot of amusement at the idea of toothpick sized cuttings. How on earth was I going to get a decent crop of buds? Well, soft tip cuttings have an unrestricted growth potential and grow much faster than semi hard or fully lignified hard wood cuttings. At the end of the day we get a much higher crop weight using the soft tip cuttings.

I use fine point scissors for trimming the plants, they are fast and easy to use. Quick enough to do 2 to 3 cuttings a minute. Forget the stories that they bruise the stem and cause rot, it's rubbish! They do need to be sharp, so buy a new pair and keep them just for this task. As far as hygiene is concerned, providing all you Mums are free of virus, simply put them through the dishwasher after every session to get rid of the sap build up. This keeps them free and easy to use.

How to prepare the cuttings

Inserting cuttings and covering with bag

To Summarize

Preparing the cutting:-

[one] - typical tip cutting ready to prepare.

[two] - snip off the side shoot and leaf the node you want to root.

[three] - cut just below the node you want to root.

[four] - dip the trimmed node in rooting hormone.

Inserting the cuttings:-

-3.5 inch square pots are used to root in

-Filled with half perlite and half universal compost or allmix

-The mix is pre-soaked with water dosed with 1 ml of 35% or 2ml per litre of 17.5% H2O2 and 5 ml of maxicrop

-Then the cuttings are dibbed in to the compost, 9 to 12 per pot

-The dibbed cuttings are then watered in using a fine rose same mix as above to settle them in.

-Cover with a plastic bag and put under constant 24-hour lighting

-Preferably cool-white fluorescent lighting at 20 w per sq foot and a temperature of 75 degrees fahrenheit.


"There are a number of reasons for not rooting directly into plug trays."
Lets look at what we need from a rooted cutting... We want one that is suited to growing in a confined space i.e. a pot. They are as closely matched as possible. To get good yields from a grow, uniformity is the rule. It is no good having one plant that produces 50 grams when its 2 neighbours only produce 15 grams each. They are identical stock but this is what is often seen in grow after grow. It is much better to try and get all the plants averaging 35 grams well within the capacity of the stock line of a plant that can make 50 grams.

Remember we are talking about growing in soil based or soilless compost mixes. The root type that the cutting produces is very important, lots of fine feeder roots are the ideal, anchor and tap roots are totally unwanted when growing in a pot. Remember the amount feeder root mass directly effects the potential crop weight

The 3.5-inch pots are 4 inches high; the rooting mix is very open with low nutrient content. This encourages early taproot development. Not all the cuttings will have rooted at the same time, so when they are transferred to the plug trays the root balls are trimmed to the same size and the tap root is removed, this goes a long way towards equalising the clones. Once they are transferred as below they tend to stay pretty even and grow on rapidly. To show what we are looking for some equalised clones grown on and just put into flower. There are several varieties in this grow and there is not more than an inch or so between plants in each variety. They are placed by variety to make a stadium effect and make maximum use of light.

Around ten days later the cuttings will have rooted through. The rootball is gently broken up, each cutting has its roots trimmed back to equalise the cuttings and make them fit the plug tray! Full strength peat or coir compost using organic base fertilisers, are used for this.

Then they are put back in the Clone/Mother box for about 5/6 more days until thoroughly rooted through, this is very important at all stages of repotting! Fully rooted plants just jump ahead when moved on-- we have found that plants moved into bigger pots too early typically produce 25% to 30% less final crop weight!

Moving the rooted cuttings to plug trays.
Cuttings in plug trays a few days later ready to move on to their first pots.
Showing a cutting out of the plug tray, fully rooted out and ready to go.

Cutting like this can be taken from any plants in veg. That's it you are ready to grow!

28 members found this post helpful.
Old 07-21-2006, 06:51 AM #4

Posts: n/a
Your very welcome vh Ghost. I wish we could both thank oldtimer himself for this well written article. I hope that this helps you in your ventures.

If anyone has any suggestions or anything to add about bonsai moms or bonsai period, please feel free to post it. Also I need some feedback on my posts, I was thinking of using the thumbnail pics but I usually like the full size so as not to keep clicking then closing etc. But if most people like the thumbs I would be happy to change it.

keep it green

Old 07-21-2006, 11:26 AM #5

Join Date: Feb 2006
Posts: 43
mmartine is on a distinguished road
Damn mon i think you just made my life easier.............thanx for this great i also add very god thread very well documented........
mmartine is offline Quote

Old 07-21-2006, 11:43 AM #6
Closet Funk
CeRtIfIeD OrGaNiC!

Closet Funk's Avatar

Join Date: Feb 2006
Location: The Lake
Posts: 1,828
Closet Funk has a spectacular aura aboutCloset Funk has a spectacular aura aboutCloset Funk has a spectacular aura aboutCloset Funk has a spectacular aura aboutCloset Funk has a spectacular aura about
Good thread. Bonsai mums rock. I made a few mums from seed. I grew out some seeds and selected my best two plants. Luckily they turned out female. I had them in 1 gallon pots. I topped at about the 4th node and let some side branches form. Once side branches formed I choose two main branches and chopped the rest. I then cut the top stem off where the two branches grew from. This way two side branches are my main frame. I then transplanted them into 1/2 gallon square pots. I trimmed the roots. I put them in regular potting soil with a pinch of Plant-Tone, Lime, and Gypsum. I just water them when needed and take cuts every month. One of them died from unknown reasons. Possibly from the one watering with tap water or root rot. My other mum is healthy. I gave her some Maxi Crop today because she looked like she needed some. I'm going to take more cuts in about a week. I plan on having a few bonsai mums. She will be a good starting point when I start in the fall. Take some clones, root them, and flower them out.
"Smoke Good, Eat Good, Live Good"

Certified Organic!
Closet Funk is offline Quote

Old 07-22-2006, 10:43 AM #7

Posts: n/a
Thanks for the kind words. As I already said all praise is due to oldtimer1 for this great article. Im glad you found it helpful. I love how to threads with big pics myself, much easier to go through IMO.

1 members found this post helpful.
Old 07-22-2006, 11:35 AM #8
End Cannibis Prohibition Now Realize Legalize !!

Maj.PotHead's Avatar

Join Date: Mar 2006
Location: in the astroplane
Posts: 6,634
Maj.PotHead has much to be proud ofMaj.PotHead has much to be proud ofMaj.PotHead has much to be proud ofMaj.PotHead has much to be proud ofMaj.PotHead has much to be proud ofMaj.PotHead has much to be proud ofMaj.PotHead has much to be proud ofMaj.PotHead has much to be proud ofMaj.PotHead has much to be proud ofMaj.PotHead has much to be proud ofMaj.PotHead has much to be proud of
thankyou for reposting this and for saving it in the 1st place guess i have another project turn 1 or 2 of my purple shaq clones into a bonsai right on duder
Man made booze God did not
God made pot man did not
The Old Farmers Almanac
U.S. State By State Laws on our hobby

Beneficial Insects
sick plant ??? <-- mynamestitch's work

Informative threads by I.M. Boggled

PotHeads BunKer 2011
Maj.PotHead is offline Quote

Old 07-22-2006, 02:02 PM #9

Posts: n/a
well smack my ass, thanks oldtimer1, this has been in my, ahem, "filing cabinet" for years now & have been using bonsi cuttings rather successfully for years now, cheers oldtimer1

its the original publication of this info, with added coffee & paint for, em,er,em,er preserving it i guess.....

Last edited by ayhev-jezvarted; 07-22-2006 at 02:04 PM..

Old 07-22-2006, 05:13 PM #10

Join Date: Feb 2006
Posts: 242
Bermyboy is on a distinguished road
Great addition of information to the board!
Bermyboy is offline Quote

Post Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT +2. The time now is 02:05 AM.

This site is for educational and entertainment purposes only.
You must be of legal age to view ICmag and participate here.
All postings are the responsibility of their authors.
Powered by: vBulletin Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.