Palindrome
King of Schwag
Thanks for all help guys!! i must to think about it
@palindrome what kind of nozzles can i use? what type of pipes can i use? i talking for aero... hpa
Any PE80 pipe should do, you might have to calculate the pressure destribution depending on pump, length and manifold size. You will need to google this, it's math and I cant remember the formulars n shit. Do some research, my guess is 25 mm PE80 pipe will be perfect.
For the misters, any 360 degree micron mister around 80 micron should do fine. I used a 60-100 micron mister/fogger, that give about 80 micron mist at 5 bar. I would pick something that fit's, the international PE standard. Another good choice, would be a mister/fogger thats easy to change.
I would use this butterfly
And fit them with the 7 L/h misters like on the pic below. Often sold as Dan foggers or cross foggers, im sure you can find them online.
Foggers/micron misters clogs up, so you will need a micron prefilter on your feedline, id say 120 micron should be all right. But still even with that, they clog from nutrient build-up. Why I like the butterfly mounted misters, as you can easy remove and replace it. If one clog during the grow, you don't need to run a cleaning solution with plants in your system. You just replace the mister, put the clogged one in some vinegar and it's good as new next time you'll need it.
So get extra misters!
Cross fogger, with the same 7 L/h mister head