ICMAG'S OFFICIAL ~DIY~ LINK-O-RAMA - Page 27 - Growroom Designs & Equipment - International Cannagraphic Magazine Forums

Black-King · 03-17-2016, 12:48 AM

Yes better make this a sticky so it doesnt get lost

hoopla · 11-24-2016, 01:07 AM

Thank you very much! Super informative!!

justanotherbozo · 09-17-2017, 11:06 PM

...how the fuck is this not a Sticky? ...how the hell else are the noobs suposed to find it?

bozo

Yuno.Who · 10-14-2017, 03:06 PM

^^^^^ agreed. This link was probably the ONLY thing that helped the learning curve. I went from clueless, to a 1000w tent, now I have an 8kw sealed room with a feed system for my hempys that runs effortlessly (yeah right) but if it wasn't for the threads on the link-o-rama I'd still be using cfls in a hot closet with tons of deficiency.

I just wish I could find a thread about chop/dry/cure that is similar to what I have going on.
I let my plants die on the vine, then hang whole plants for 16 days at 60° and 60%rh like the jungle boys. Does anyone else have experience with this process?

justanotherbozo · 10-15-2017, 06:35 AM

Quote:

Originally Posted by Yuno.Who

^^^^^ agreed. This link was probably the ONLY thing that helped the learning curve. I went from clueless, to a 1000w tent, now I have an 8kw sealed room with a feed system for my hempys that runs effortlessly (yeah right) but if it wasn't for the threads on the link-o-rama I'd still be using cfls in a hot closet with tons of deficiency.

I just wish I could find a thread about chop/dry/cure that is similar to what I have going on.
I let my plants die on the vine, then hang whole plants for 16 days at 60° and 60%rh like the jungle boys. Does anyone else have experience with this process?

...sounds a little like how Kog does it if i remember right.

https://youtu.be/NHyZXxmMa7o

peace, bozo

Yuno.Who · 10-15-2017, 05:53 PM

It's been so long I don't remember how to quote on here anymore. But KOG has basically the same idea just a more primative approach. I leave very little foliage on my girls during flower to avoid the mess later, heavily lollied about 5 days before they go in for flower and then I do some thorough fan pulling about every 3 days depending on growth and strain. If I have a 9-10 weeker after flush I tend to let them dry out in their pot for about another week until they are for sure...dead. at that time I pull what I can off that has close to no medicinal value then the plants get chopped from the main stem to be hanged in a dry room I keep at 60° and 60% rh and have the air in the room recycling completely every 6-7mins but no direct air flow on plants. They just kind of slow dry and pull moisture out and evaporate it at such a slow rate (about 16 days) that they seem to cure up a little as well. From there they hit the trim machine then bags or bins depending how I'm feeling.

This is the system I mirrored on a slightly smaller scale lol
https://youtu.be/mtk9-NjcIJA

11-24-2016, 01:07 AM	#262
hoopla Newbie Join Date: Sep 2013 Posts: 12	Thanks Thank you very much! Super informative!!
	Quote

09-17-2017, 11:06 PM	#263
justanotherbozo on the bus ride of life. Join Date: Jun 2008 Posts: 1,606	...how the fuck is this not a Sticky? ...how the hell else are the noobs suposed to find it? bozo __________________ "If a law is unjust, a man is not only right to disobey it, he is obligated to do so." .....Thomas Jefferson "Those that give up Liberty to have temporary Security deserve Neither"......Benjamin Franklin. "The further a society drifts from the truth, the more it will hate those that speak it." ..... George Orwell
	Quote 2 members found this post helpful.

10-14-2017, 03:06 PM	#264
Yuno.Who Member Join Date: Jul 2011 Posts: 186	^^^^^ agreed. This link was probably the ONLY thing that helped the learning curve. I went from clueless, to a 1000w tent, now I have an 8kw sealed room with a feed system for my hempys that runs effortlessly (yeah right) but if it wasn't for the threads on the link-o-rama I'd still be using cfls in a hot closet with tons of deficiency. I just wish I could find a thread about chop/dry/cure that is similar to what I have going on. I let my plants die on the vine, then hang whole plants for 16 days at 60° and 60%rh like the jungle boys. Does anyone else have experience with this process?
	Quote 1 members found this post helpful.

03-17-2016, 12:48 AM	#261
Black-King Newbie Join Date: Mar 2016 Posts: 5	Yes better make this a sticky so it doesnt get lost
	Quote

10-15-2017, 05:53 PM	#266
Yuno.Who Member Join Date: Jul 2011 Posts: 186	It's been so long I don't remember how to quote on here anymore. But KOG has basically the same idea just a more primative approach. I leave very little foliage on my girls during flower to avoid the mess later, heavily lollied about 5 days before they go in for flower and then I do some thorough fan pulling about every 3 days depending on growth and strain. If I have a 9-10 weeker after flush I tend to let them dry out in their pot for about another week until they are for sure...dead. at that time I pull what I can off that has close to no medicinal value then the plants get chopped from the main stem to be hanged in a dry room I keep at 60° and 60% rh and have the air in the room recycling completely every 6-7mins but no direct air flow on plants. They just kind of slow dry and pull moisture out and evaporate it at such a slow rate (about 16 days) that they seem to cure up a little as well. From there they hit the trim machine then bags or bins depending how I'm feeling. This is the system I mirrored on a slightly smaller scale lol https://youtu.be/mtk9-NjcIJA
	Quote