[frostqueen]

Originally Posted by Mikell

I bought a bottle of whiskey the other day to celebrate and have been as hot as the Irish ever since.

If that doesn't explain away helicoptering the meat and two veg, I have no follow up.

Drink?

Mmmmm: whiskey.

Stay hot, my friend.

[Principante 8]

Originally Posted by Ichabod Crane

Your volumes is off.

Here is the calculation for those doing it by hand.

c1(v1)=c2(v2)

c1 is the starting concentration
v1 is your starting volume
c2 is final concentration
v2 is final volume

Since you want to figure out starting volume that becomes x. so the new formula is then:
c1(x)=c2(v2)

so the numbers look like this:

0.35x=0.10(3785) or 0.10(3785)/0.35=1081.4

So add 1081.4ml to a gallon jug then top off to a gallon. This will give you a 10% h2o2 solution.

I think it was just a decimal error from greyskull.

Are you spraying a 10%solution? I've sprayed out of the brown bottles @3%and it worked. Also I tried cutting that in half and it also worked. My experience with it is limited so I have much to learn. Have you tried lower dilution ratios without having success? Or did you start with 10%? Any burning at that strength? I have a friend in need of my non sage-like advice.. Thanks

[George]

Originally Posted by krunchbubble

They probably tested for all those, I was only concerned and asked for myclobutanil...

I buy DHN clones,so no need to spray for bugs....

I wouldn't make that claim lol. I did a nice 1000+ mile round trip in 1 day specifically for DHN clones and brought home russet mites from elemental wellness. Enormous waste of time that became, not only for the jacked up drive but the fact that I ended up tossing everything I had because of it. DHN clones might be clean but the non DHN clones they're sitting and being handled next to won't always be. Been there done that. I'm sure you have a different hook up or maybe deal with them direct, but your average joe going into a dispensary that deals with DHN and non DHN clones could lead to a disaster (I'm the average joe) Regardless, I appreciate the test with eagle 20 as I gotta deal with PM now. I feel much safer using the stuff after reading this thread. Russet mites, white flys and now PM. if I can check off broad mites and aphids I'll really be in the mix lol

[Lyfespan]

potassium silicate will help with PM when used foliarly and systemically.

question jumped in my head while shopping chems, what if its a combonation of chems that is keeping things at longer half lives?

[balsamfirgreen]

Has anyone noticed that the Eagle 20 reduces the efficacy of biofungicides for the flowering period, since one thing we can all agree on is E20 is no good in flowering, we must deal with some sort of biological foliar defense against grey mould/botrytis, after the PM is taken care of by the Eagle, will the eagle knock down the efficacy of something such as MycoStop or actinovate or any other bio-fungicides (as a foliar spray for bud rot)? Any experience in using the two on the same grow from anyone?

[krunchbubble]

Another round drying, ready to get tested....

This is another crop I sprayed 2 weeks before harvest...

[paladin420]

Now if you could just source a spray for haters n asshats...





Love to see that warning label... ~
Good work Krunch

[Biosynthesis]

I am a grower in southern Oregon. Thanks for all the great information!

[Chimera]

Originally Posted by krunchbubble

Another round drying, ready to get tested....

This is another crop I sprayed 2 weeks before harvest...

2 weeks before harvest.... might I suggest you have SC Labs test for residual Myclobutanil rather than Steep Hill, steep hill has had some very questionable results....

[krunchbubble]

Originally Posted by Chimera

2 weeks before harvest.... might I suggest you have SC Labs test for residual Myclobutanil rather than Steep Hill, steep hill has had some very questionable results....

I tried to go through them, fuck they are lazy people...