Peat's Tumbler - Page 2 - Growroom Designs & Equipment - International Cannagraphic Magazine Forums

pontiac · 04-05-2009, 04:37 PM

Nice work Peat

winkdogg · 04-05-2009, 08:13 PM

and a nug for your troubles

t33to · 04-10-2009, 02:27 AM

What exactly does this do? Trim buds?

winkdogg · 04-10-2009, 03:57 AM

SEPERATES THE "KEIF" OR "KIF" FROM TRIM OR BUDS

smokesalot420 · 04-30-2009, 09:47 PM

Nice idea, I was just thinking of how to make one of these myself.

FreezerBoy · 04-30-2009, 10:47 PM

Quote:

Originally Posted by Peat

I then took an oversized piece of 150u fabric & tacked it around the bottom disc. I just tacked & glued a few inches at a time...keeping the fabric as tight and straight as posible...And, letting it dry in between.

Why oversized? I see it's tight around the discs to prevent spillage. Why all the slack in the middle?

05-01-2009, 12:29 AM

Yeah, It's a little slack...
...just my level of craftsmanship, I suppose.

I built it a while back ...ran it a couple of times....

It's a little loud...& rickety....& slow....didn't get much yield...

But, maybe someone can use the idea.

zaaboot · 05-26-2009, 06:23 PM

Agree with you ther Peat - the idea is definately there - i will be rubbish and doing this sort of thing - but one of my mates will knock one up for me - he is a carpenter - so should have no issues.

If he gets round to doing it ever - i will post it back here.

Thanks for the initial hard work

05-26-2009, 07:26 PM

Good luck to ya, zaaboot!
Let us know how it goes!

Hey randude,
I think the speed is ok. It just seemed to take a long time.
But, I honestly don't have anything to really compare it to.

05-26-2009, 07:52 PM

Thanks man!

But I'm just working with what others have figured out before me.

04-05-2009, 04:37 PM	#11
pontiac Pass That S**t! Join Date: Mar 2006 Location: Under the Northern Lights Posts: 1,349	Nice work Peat __________________ ▲►▼◄▲►▼◄▲►▼◄▲►▼◄▲►▼◄▲►▼◄▲►▼◄▲► ▼◄▲►▼◄ {150w HPS All-in-One Micro Cab} ~Mazar Kush~ {10 Clone Ebb & Flow SOG Diary} (06/17/09)(ACTIVE) Stealth Dresser-250w HPS + 40w CFL ~ICE & Chrystal~ DWC LST (04/04/07)(ABORTED) 400w HPS/MH ~AK48~ DWC ScrOG (04/09/06)(First Grow)(HARVESTED) ▲►▼◄▲►▼◄▲►▼◄▲►▼◄▲►▼◄▲►▼◄▲►▼◄▲► ▼◄▲►▼◄ ICMAG'S OFFICIAL ~DIY~ LINK-O-RAMA OG refugee OverGrow GROW FAQ don't be pissed quit playin! hindsight is always 20/20..........change "if only" to "next time" and you're set homie! - USER NAME
	Quote

04-05-2009, 08:13 PM	#12
winkdogg Member Join Date: Mar 2009 Location: northeast usa Posts: 90	thanks for the link and a nug for your troubles
	Quote

04-30-2009, 09:47 PM	#15
smokesalot420 Member Join Date: Oct 2008 Posts: 890	Nice idea, I was just thinking of how to make one of these myself. __________________ My 800W CMH 400W HPS Multi-Strain Perpetual Grow https://www.icmag.com/ic/showthread.php?t=111138 I get coughin fits when I take fat ass hits from my bong!!!!
	Quote

04-10-2009, 02:27 AM	#13
t33to Member Join Date: Sep 2008 Posts: 492	What exactly does this do? Trim buds?
	Quote

04-10-2009, 03:57 AM	#14
winkdogg Member Join Date: Mar 2009 Location: northeast usa Posts: 90	SEPERATES THE "KEIF" OR "KIF" FROM TRIM OR BUDS
	Quote

05-01-2009, 12:29 AM	#17
Peat Guest Posts: n/a	Yeah, It's a little slack... ...just my level of craftsmanship, I suppose. I built it a while back ...ran it a couple of times.... It's a little loud...& rickety....& slow....didn't get much yield... But, maybe someone can use the idea.
	Quote

05-26-2009, 06:23 PM	#18
zaaboot New Member Join Date: Apr 2009 Posts: 3	Agree with you ther Peat - the idea is definately there - i will be rubbish and doing this sort of thing - but one of my mates will knock one up for me - he is a carpenter - so should have no issues. If he gets round to doing it ever - i will post it back here. Thanks for the initial hard work
	Quote

05-26-2009, 07:26 PM	#19
Peat Guest Posts: n/a	Good luck to ya, zaaboot! Let us know how it goes! Hey randude, I think the speed is ok. It just seemed to take a long time. But, I honestly don't have anything to really compare it to.
	Quote

05-26-2009, 07:52 PM	#20
Peat Guest Posts: n/a	Thanks man! But I'm just working with what others have figured out before me.
	Quote