Help finding a driver

[stevewinthrop]

So I have slowly been buying parts to make an LED light for my grow tent, buying parts here and there every paycheck.

I got 4 of these LEDs and want to know what the best option for a driver would be. The eBay link is http://m.ebay.com/itm/251473242983?cmd=VIDESC

As you can see they show the voltage being 30-34v (which is consistent with them being 10x cree)
The DC current is 1.5A and then it says current 350ma-1.5A

So to power 4 of these I'll either need to find a 120v output 1A driver or I'll have to use several drivers, correct?

I'm new to this, so any scoops on good drivers would be nice.

Thank you,
Steve

 

[exploziv]

120V DC is a lot of power and it's not so safe, so they are not so easy to find. You may find one, but I'd go with 4 drivers, one for each led. At least, if the driver fails, you got only 25% of your light missing, not 100%. And, besides that, transporting DC current over wires is unefficient, better to have it transformed from AC to DC as close to the led unit as possible.
Found some cheap drivers searching: "" 50W High Power Led Driver Power Supply Waterproof Output DC 25-36V 1.5A "" --- 9.99$ per piece

 

[stevewinthrop]

Ok, I thought that was probably what I would have to do. Thank you for pointing me the right way!