Help setting up cls please!

[Kg35590]

Hey guys. So I was recently left out to dry by a former extractor sponsor on ic mag. Still haven't gotten two of my four machines. And now I have to drop another 1000 on steel bellows for my vac ovens, which I already paid, but he has no record of. Take a guess who.

So being that I never received the free lesson I was promised for dropping thirty some odd thousand in parts and extractors, I'm reaching out to whomever has any knowledge and can help me piece this machine together. It's mainly just the tubing from extractor to recovery, mt69, and the tank. Just don't know which color for where. Let me do my wake and bake then I'll post some pics.

Also! I'm on a time constraint because I wanna over night ship from across international so if anyone knows the answer to this question by 12:30 west coast time it'd be super appreciated!

Can I use a 't' connector on an e2m30 and hook it up to two 1.9 AI ovens? Would a ball valve be required so that only one pulls at a time?

Last but not least, I know this is a very silly question, but does the cls require a vacuum pump, and if so, is the e2m30 sufficient or too strong? Sorry for the rookie questions guys, I was promised a complete walk through and tutorial and it never happened.

Thanks for any and all help!

 

[Chonkski]

Should have went with terppextractors..


I use one vac for my ovens, no ball valves although that wouldnt hurt..

yes you will need a vac for your system, and yes your model will do fine.

Go to terppextractors.com ( I assume its okay to share there link because they are a sponsor here at ic) and I believe they have some tutorials there.

If you need further help, just ask. You are at the right spot..

I'm assuming you're talking about an MKIII?

 

[Kg35590]

Red beards spin on it I believe. Thank you for the helpful info!

 

[blastfrompast]

I was wondering what happened to the banner.....Did he ever fix his website lol

 

[krunchbubble]

Hey guys. So I was recently left out to dry by a former extractor sponsor on ic mag. Still haven't gotten two of my four machines. And now I have to drop another 1000 on steel bellows for my vac ovens, which I already paid, but he has no record of. Take a guess who.

So being that I never received the free lesson I was promised for dropping thirty some odd thousand in parts and extractors, I'm reaching out to whomever has any knowledge and can help me piece this machine together. It's mainly just the tubing from extractor to recovery, mt69, and the tank. Just don't know which color for where. Let me do my wake and bake then I'll post some pics.

Also! I'm on a time constraint because I wanna over night ship from across international so if anyone knows the answer to this question by 12:30 west coast time it'd be super appreciated!

Can I use a 't' connector on an e2m30 and hook it up to two 1.9 AI ovens? Would a ball valve be required so that only one pulls at a time?

Last but not least, I know this is a very silly question, but does the cls require a vacuum pump, and if so, is the e2m30 sufficient or too strong? Sorry for the rookie questions guys, I was promised a complete walk through and tutorial and it never happened.

Thanks for any and all help!

Blast Redbeard on his IG. He's on there all the time....

 

[krunchbubble]

I was wondering what happened to the banner.....Did he ever fix his website lol

He ripped people off on here, including the OP...

Took peoples money, never sent the stuff and left this website...

But apparently he is God on IG, I see him all over the place touting his new "clear"...

 

[Kg35590]

Might come to that. Have his number and ware house addy. No return calls and he's always not there when I pop by.

 

[krunchbubble]

Might come to that. Have his number and ware house addy. No return calls and he's always not there when I pop by.

Text him and tell him you will blow his name up, if you dont get what you paid for!

 

[krunchbubble]

Might come to that. Have his number and ware house addy. No return calls and he's always not there when I pop by.

Redbeard is in Sacramento, right?

Maybe take a 90 minute drive to BHOgarts's in San Jose. Buy what parts you need from them, and they can show you in person how to run a CLS...

 

[icdog]

KG can you provide a list of what you've got, 30k for 4 mk3's and a few other things doesn't add up.

Yes a cls needs a vac pump, not sure if the e2m30 is too strong, unlikely for just pulling vac. It also needs a recovery pump.

Its not hard to put it all together as long as you have all the parts. There have been other posts from RB's customers who didn't receive everything. Why are people still buying from that guy.

 

[Chonkski]

I knew it was redbeard too haha.. when you said guess who..



I'm kind of in your area, I would be able to help out my next trip in that direction

 

[djelliott916]

I am in Sacramento if you need help.

 

[Kg35590]

KG can you provide a list of what you've got, 30k for 4 mk3's and a few other things doesn't add up.

Yes a cls needs a vac pump, not sure if the e2m30 is too strong, unlikely for just pulling vac. It also needs a recovery pump.

Its not hard to put it all together as long as you have all the parts. There have been other posts from RB's customers who didn't receive everything. Why are people still buying from that guy.

Here's the list:

4 e2m30's. 3600$ total
4 five gallons of oil 600$
Clamps and o rings 160$ *never got these
Shipping. 350$
4 six ft stainless vac tube 1080$
2 2.5 lb systems. 6500$ only received 1
2 5 lb systems. 9500$ only received 1
4 1.9 cu AI ovens. 7108$
8 Extra shelves. 472$
4 kf fitting. 600$ never got these
Shipping. 600$

Aside from shipping it's a tad shy of 30. I went through rb as the distributor for Edwards and ai

 

[Kg35590]

Oh! And 2 ref tec handi vacs for 5200. But that wasn't through him.

 

[Kg35590]

I am in Sacramento if you need help.

Do you also have his style extractor?

 

[icdog]

Man I don't know what to say. Did Rb recommend the reftecs? He was the guy who first promoted them, then he said they weren't as good as he originally thought so don't use them, I think the one he tested died quickly. This was around January or Feb. When did you order this?

Did you receive all the parts for your 2.5 and 5lb systems? If so your generally ok.

What are the clamps and o rings and KF fittings that you didn't get used for?

What are the shelves made of?

What are the 6ft stainless vac tubes for? Is this the vent tubes, he still uses tube instead of ptfe hose for some reason. Interesting that he charges separately for this.

You should be able to use a T connector for the e2m30 and 2 vac ovens, those things are pretty strong. Likely you can pull vac on all 4 of your ovens with 1 e2m30.

 

[djelliott916]

Do you also have his style extractor?

I had an MKIII, sold it a few months ago. Shouldn't have. Waiting on parts to build another one now.

 

[Gray Wolf]

Here's the list:

4 e2m30's. 3600$ total
4 five gallons of oil 600$
Clamps and o rings 160$ *never got these
Shipping. 350$
4 six ft stainless vac tube 1080$
2 2.5 lb systems. 6500$ only received 1
2 5 lb systems. 9500$ only received 1
4 1.9 cu AI ovens. 7108$
8 Extra shelves. 472$
4 kf fitting. 600$ never got these
Shipping. 600$

Aside from shipping it's a tad shy of 30. I went through rb as the distributor for Edwards and ai

Check out http://skunkpharmresearch.com/the-mk-iva-phoenix-terpenator/ for information on the design Redbeard copied his design from.

Also http://skunkpharmresearch.com/mk-iii-terpenator/ for generic information.

What are the six foot stainless vac tubes at $270 each?

 

[mendo420]

Hey guys. So I was recently left out to dry by a former extractor sponsor on ic mag. Still haven't gotten two of my four machines. And now I have to drop another 1000 on steel bellows for my vac ovens, which I already paid, but he has no record of. Take a guess who.

So being that I never received the free lesson I was promised for dropping thirty some odd thousand in parts and extractors, I'm reaching out to whomever has any knowledge and can help me piece this machine together. It's mainly just the tubing from extractor to recovery, mt69, and the tank. Just don't know which color for where. Let me do my wake and bake then I'll post some pics.

Also! I'm on a time constraint because I wanna over night ship from across international so if anyone knows the answer to this question by 12:30 west coast time it'd be super appreciated!

Can I use a 't' connector on an e2m30 and hook it up to two 1.9 AI ovens? Would a ball valve be required so that only one pulls at a time?

Last but not least, I know this is a very silly question, but does the cls require a vacuum pump, and if so, is the e2m30 sufficient or too strong? Sorry for the rookie questions guys, I was promised a complete walk through and tutorial and it never happened.

Thanks for any and all help!

does the cls require a vacuum pump?????
Maybe you should leave extractions to the experts.

 

[soysoz]

does the cls require a vacuum pump?????
Maybe you should leave extractions to the experts.

Kinda what was going through my mind as I read this thread...