Applesauce
Member
What 8 bulb t5 fixture will fit in a 2x4 tent? The envirogro is 26". The listed widths on some of these fixtures is not accurate. For instance, the aforementioned is listed @ 19".
What 8 bulb T5 fits in a 2x4?
- Thread starter Applesauce
- Start date
PetFlora, what do you have that light in?
I'm curious if any of them would fit. I got an htgsupply 4' 8bulb for my clonebox large. Since the clone box is 2'x4' i thought it would fit since the dimensions i thought were just under 2'x4'. Turns out the frame of the clonebox is whats stopping it from fitting in mine. If i were to get a 4' 6bulb, it would work.
Its a little more expensive, but you could always buy multiple smaller lights. At least in my experience with my 150 cab, i couldnt get a 2' 6 bulb to fit, due to the dimensions. But 6 of the 2' 1bulbs or 3 of the 2' 2bulbs would fit with room to spare. Good luck and let us know if you find something that works.
I'm curious if any of them would fit. I got an htgsupply 4' 8bulb for my clonebox large. Since the clone box is 2'x4' i thought it would fit since the dimensions i thought were just under 2'x4'. Turns out the frame of the clonebox is whats stopping it from fitting in mine. If i were to get a 4' 6bulb, it would work.
Its a little more expensive, but you could always buy multiple smaller lights. At least in my experience with my 150 cab, i couldnt get a 2' 6 bulb to fit, due to the dimensions. But 6 of the 2' 1bulbs or 3 of the 2' 2bulbs would fit with room to spare. Good luck and let us know if you find something that works.
Applesauce
Member
I was told the quantum would fit. I was looking for a more economical choice. What about the 8 bulb sun blaze? Width?
That should not be the question. The question should be what are actual interior dimensions of the tent you are interested in
Applesauce
Member
I see agromax makes a 2x4 that is actually 28" wide. Out of stock though..
Sleeper7784
Active member
Sun Blaze 48 fits perfect 47.75"x22.50". It's what I was going to run before I decided 400w air cooled mh
D
Dr. Cannastein
Im rocking a 2x4 lighthouse tent, originally I got the sunblaze48 cuz it fits above but I found my tent would suck in around it to tightly when I ran my exhaust fan. Almost the same issue with the sunblaze46 but I solved it by running ducting from my inlet fan down around the light.
Attachments
