Unclefishstick's Guide to Home Bicycle Repair

[Hammerhead]

same for me I just don't. have the space and time for that right now. I have seeds cookin multiple plants of my PF looking for a keeper mom


Burkle in flower/veg
BHOG---Discontinued grew this for 2 years plus. I have the last girl curing
GG#4--in veg
headband.....in flower/veg


The OG X Mango's, GG#4 X HB, OG Mango x HB, Purple frostbyte, Peyote Purple, GSC X Q...Some of these are prego

All of these are in flower as well. I already harvested 1 GSC X Q. She is very potent but has no Terpene profile to speak of. all hash plant. Earthy,musky hashy aroma and flavor.



With cuts of all of these in the cloners .

 

[Smokin Joe]

Hell I have about 20 packs that were in my top 5 to be popped. Now I have 12 sour dabney seedlings and I only see 4 with desirable traits at this point so I think I may scrap that project early and just flower out the 4 after cloning just encase 1 shines and chunk the other 8 They just dont have any structure. Would make good poles I guess lol I have a few clones on the way and a few seeds to crack and more in the oven Maybe I should pick up the plan I was workin on last year and rent the country house.

 

[unclefishstick]

i have a nice looking cindy from the f3's,at least one that is,the sssdh are coming along as well,at least one of the mental floss already in flower is stacking up nicely,the other one looks good too,just leafy so far,and the lone strawd female at least look like it has potential..

 

[DHF]

lol .... if its got tits or wheels .... its gonna cost ya !!!

If it flies , floats , or fucks , RENT IT !!!!!!.....

Hope yer mendin well Unc....You`re tough old bird though huh ?.....Fastest movin thread I`ve ever tried ta keep up with....Ya`ll keep strokin.....and oh.....

Hey JW you old fart..... ain`t seen you down round vert-ville in a while......Don`t be a stranger.....

Peace....DHF..........

 

[unclefishstick]

the knee scrapes? naw,that didnt even hurt when i fell. my wrecks tend to be more along the lines of "why,he fell right over didnt he?,not "dude,that was gnarly!"

 

[calientecarlos]

Unc were you out hotdoggin doin wheelies in front of hot babes again??? Radical can be dangerous don't forget!!!

 

[unclefishstick]

not this time! took a wrong turn on the trail,just wasnt paying attention,found myself in deep gravel...its funny though,i just got cleats put on the bike so now i can bunny hop the bike and i admit i bounce around on the suspension like a kid bouncing on a bed...but thats not really showing off cause i dont care whos watching....this place is sort of the hotspot for local mountain bikers though,hasnt been a single visit i didnt run into other people up there,plenty of girls up there....too bad i suck at mountain biking...

 

[thewhitelotus]

little late to the party! Morning duders!

I too use a 3x3 botanicare tray inside of a 4x4 tent.....works like a champ, although reaching the big ole colas in the back of the tent isnt the easiest

did a few hours of trimming quarter sized nugs yesterday and theyre drying awaiting jars!

Just wanted to say thanks again to everyone who helped along the way. This thread is abso fuckin lutely incredible because each and every one of ya....so thanks

 

[dansbuds]

Mornin SUKers

thats exactly how i feel this morning too ..... Blahhhhhh
woke up with a cramp in my back cuz i fell asleep with the window open ..... ughhhhhh feel like i'm 80 fer christs sake
ok enough bitchin




still have them 818's to trim today , tonight & probably all day tomorrow too .... bushy bitch she is ... gotta hit the PO & the bank first .... maybe a GG puff or 2 will help change my attitude today

 

[pinkus]

Yesterday I was riding hard and this was stuck in my head-loop

King Tubby with Sir Nineys rock... I furgot they won't let us post vids...

 

[Grizz]

If it flies , floats , or fucks , RENT IT !!!!!!.....

Hope yer mendin well Unc....You`re tough old bird though huh ?.....Fastest movin thread I`ve ever tried ta keep up with....Ya`ll keep strokin.....and oh.....

Hey JW you old fart..... ain`t seen you down round vert-ville in a while......Don`t be a stranger.....

Peace....DHF..........

your so right freds, rent them, use them hard and give them back, always get top insurance though.

been lurking the vert section as I really don't have much to say,

 

[Grizz]

here is the white fly guard, the only thing I have ever found that really worked

 

[dansbuds]

Oh man .... i wish i had seen this before i signed in this morning .... it is so fitting for todays mood !!!

 

[unclefishstick]

well bloody hell,now i cant find the valve stem chingus...theres another 15 bux down the drain...

 

[calientecarlos]

Unc sounds like ya just getting used to the ol' girl!!! My fullsusp kicked n bucked til I tamed er / grew a set... but bouncin around the woods is way better than getting rattled to shit either way...

 

[Dr. Purpur]

well bloody hell,now i cant find the valve stem chingus...theres another 15 bux down the drain...

Whats that? The valve stem remover?

I remember when me and a couple of my buddies got new Gitane Interclubs with high pressure sew up tires glued onto super thin aluminum Mavic rims.

We ran 110 PSI, which was unheard of back then. Everyone else was riding schwinn varsitys and stingrays with banana seats. The tires were real thin, and had to be partially removed from the rim to repair a flat. I would cut the thick thread about 2 inches, and pull out the thin light weight tube inside to repair.

Sewing it back up without sticking the tube was a bitch, so in addition to a full sew up repair kit, I always carried a whole extra new tire/tube, folded up small and tucked under my seat.

We did one long day trip in 1970, and found a whole case of beer along side the road. We stashed it, and completed out trip up into the hills, then retrieved it on the way back, tying the cans up into out sweat shirts like bags. What a great trip.

 

[Dr. Purpur]

Hotdog Deutch Arborist tool

Hotdog Deutch Arborist tool

Over the years, Ive jealously watched Pro Landscapers and Arborists use these small light weight top handle saws. Ive always wanted one. (They are over $600.00)

Most of Stihl's saws are made in America, if not all, with exception to this one. It has a special design, high output motor, that gets 20% better fuel effeciency and runs super clean. Far better for the environment, then most all other saws.

Little tiny light weight saw with high RPMs and about 2 1/2 horsepower.

It made short work of about 1/3 cord of wood yesterday. It cuts real fast with some hi RPMS.

A million times better then the saws Ive owned before.

Im going out to attack the Headband, OGMango, and gorilla plants from last years grow.

Theres some nice wood on the OGMango plant to make a craft with.

 

[unclefishstick]

Unc sounds like ya just getting used to the ol' girl!!! My fullsusp kicked n bucked til I tamed er / grew a set... but bouncin around the woods is way better than getting rattled to shit either way...

i did a bunch of bunch of mountain biking 15 years ago in alaska but its a totally different thing than out here in the desert...so basically a noob at it and i just put the spd pedals on the bike the other day so yeah,just getting the saddle hours in doing it,i assume in 6 months time i will have bought my skill level up quite a bit just like with road riding...

Whats that? The valve stem remover?

I remember when me and a couple of my buddies got new Gitane Interclubs with high pressure sew up tires glued onto super thin aluminum Mavic rims.

We ran 110 PSI, which was unheard of back then. Everyone else was riding schwinn varsitys and stingrays with banana seats. The tires were real thin, and had to be partially removed from the rim to repair a flat. I would cut the thick thread about 2 inches, and pull out the thin light weight tube inside to repair.

Sewing it back up without sticking the tube was a bitch, so in addition to a full sew up repair kit, I always carried a whole extra new tire/tube, folded up small and tucked under my seat.

We did one long day trip in 1970, and found a whole case of beer along side the road. We stashed it, and completed out trip up into the hills, then retrieved it on the way back, tying the cans up into out sweat shirts like bags. What a great trip.

you know how the valve stem is on the tube? im going tubeless so i need the replacement valve stem that just screws into the rim...

 

[bugman52]

my sour power mom, just took a bunch of cut, an gave away.
I just up potted to 4 gal pot, gotta get this one in bud before she get any bigger.

yeah buddy !!! mine trippled in height when i put them in !! i hope ya have the headroom
.

I got this one in another room maby 7 ft hight, ill spread it out & tie it back or down lol

 

[dansbuds]

I hope the 2 pheno's are close , the one i had was superb !!! frosty as as hell .... & nice fat buds of stanky sour goodness !!