Unclefishstick's Guide to Home Bicycle Repair

[dansbuds]

Dinners done & cleaned up , now its time to smoke a fatty & go in & tackle that last GG4 . still have the 2 818's too , but i doubt i'll get to them tonight . gotta see if my guy even wants them , if not .... into the hash bin they go . got way to much other stuff going to worry about a couple week ass strains .

 

[Dr. Purpur]

Both of my female headband s1s are very potent. I am disappointed in the flavor of one of them. It's just kind of bland. The other has a great sour d type of flavor, but goes grape koolade, after about 75 days.
I still think that the GG4$ x Headband will put out some great keepers

 

[dansbuds]

thats why i'm callin it 818's Doc , so as to not confuse it with yours .

 

[unclefishstick]

after some tinkering around i got the rack mount figured out for the trailer,had to take off the rack and rack trunk and the fender on the trailer to make it work,but i think its good to go basically...its certainly awkward in a way,not much road testing yet but im pretty sure this will work....

[FONT=Arial, Helvetica, sans-serif]

[/FONT]


the only mod i want to do on this is make a plywood mounting plate,or two of them,bolt them together one on each side of the mesh to spread the load out and then bolt the rack and aluminum plate through that....think once i do that,and lash the bike in place it will be fairly stable to ride....

[FONT=Arial, Helvetica, sans-serif]

[/FONT]

new headlamp set up,new one is top right....i think 3 lights will be enough....
[FONT=Arial, Helvetica, sans-serif]

[/FONT]

 

[unclefishstick]

oh yeah,the garden....

plants gettin big-nified...

[FONT=Arial, Helvetica, sans-serif]

[/FONT]

the clones and seedlings finally pulling through after being ignored for too long,sprang back in a couple of days,in another week they all should be fully recovered...

[FONT=Arial, Helvetica, sans-serif]

[/FONT]
[FONT=Arial, Helvetica, sans-serif]

[/FONT]
[FONT=Arial, Helvetica, sans-serif]

[/FONT][FONT=Arial, Helvetica, sans-serif]

[/FONT][FONT=Arial, Helvetica, sans-serif]

[/FONT]

 

[unregistered190]

Good evening y'all....just caught up. Hope everyone had a good weekend!

Not long until I get to harvest my third grow...for my next round, 4 Satoris from clone are looking great and will get 12/12 starting tomorrow or the next day. Excited about this grow as all 4 will be the same plant so should be easy to manage.

But, the babies (started from seed 12/18) are not really looking to good...dunno if I accidently mixed up nutrients when watering them last time as in giving them 1100 ppm that should have gone to adult flowering plants.
Only two I am really worried about as they are SLH that I paid $ for...the rest are bagseed but still would suck to lose them.

Pics to follow.....looking for advice y'all!

 

[dansbuds]

the only mod i want to do on this is make a plywood mounting plate,or two of them,bolt them together one on each side of the mesh to spread the load out and then bolt the rack and aluminum plate through that....think once i do that,and lash the bike in place it will be fairly stable to ride....

is mounting it there going to mess with the tote you keep in there or are ya gonna be able to take it out if your not using it ?

& your garden SUX .... as usual
I hate you guys with all that headroom !!! which means pretty much all of ya
just got done workin in mine .... can't ya tell ?

 

[unclefishstick]

is mounting it there going to mess with the tote you keep in there or are ya gonna be able to take it out if your not using it ?

& your garden SUX .... as usual
I hate you guys with all that headroom !!! which means pretty much all of ya
just got done workin in mine .... can't ya tell ?

it wont work with the tote,i normally just shop with that because i can haul more...i could leave the plywood plates in place and just take the bike mount off when im not using it,its just 3 bolts...think of it as a snap in trailer hitch,just for towing a bike along,you can see theres still plenty of space on the trailer for something like a drybag or two,and im pretty sure my 6 liter water bag would fit behind the forks and with the racks and panniers on the bike i should have plenty of space...
anyway,i think its cooler than shit if it all works...theres still space for a small cooler and a hibachi grill....

 

[dansbuds]

well thats why i mentioned it . before you get it fully mounted why not see if you can rig up some kind of quick release for just the fork mount . or maybe just some wing nuts & lock washers for the whole dealy so ya can take it off if your not using it to tow. .

wingnut ..... i'm pretty sure you know what that is

 

[unclefishstick]

its got to be bolts,indeed i will probably need to use locktite or something like it to keep them from rattling loose and maybe use a ratchet strap to lock the bike in place,even going down paved roads theres a lot of vibration on everything so it all wants to rattle loose...and really,how hard is it to undo 3 bolts to swap it out? not very long really,i carry all the tools needed to do it roadside anyway...a matter of minutes in the shop,and im talking 1/2 inch ply and only like an 8x6 plate so it wont weigh much...just drill 3 holes through that and i have a mounting plate ready to go,i have two kick stands on the trailer so the whole rig stands up by itself... i will let you know tomorrow after riding it around town for a bit...i think theres a husky tool tote that will fit in the front,i can lock the bike to the mount and would be able to lock stuff in the tool tote and they are pretty watertight....my version of an rv with a harley on a trailer...


lol,already thinking spring and summer camping,getting a down sleeping bag/blanket,good down to freezing at least only 27 oz and a bivi sack so i will have a sleeping system under 3 lbs,or i have a one man tent which only means 4 1/2 lbs,all of which would fit in a small pack so i could do summer quick over night trips with all night riding to beat the heat...

 

[unregistered190]

Pics

Pics

Here are my 4 Satoris about to get 12/12 next couple of days. They seem to be happy.

Unlike my little ones.......

 

[unregistered190]

Seedlings

Seedlings

Here are my seedlings....need to run ph"d water w/o nutes?

Here are the two I am most interested in....SLH. And they look the worst out of the bunch

 

[dansbuds]

Unc is pretty good at diagnosing problems , I'll let him holler at ya . they do look pretty sad though . the ones in the tote look good , what differences are there in the way you treat/feed the 2 sets of plants ? start there .

 

[unregistered190]

Dans...the ones in the tote are clones i took...two of my "keeper" Satori I am so proud of, haha (all I have so gotta be proud of something).

But, the difference is seeds were started in and are in organic soil and clones in pro-mix/perlite, however been feeding them the same. approx 300 ppm ph'd to 5.9.

Thanks for your reply my friend

 

[unclefishstick]

its lock out,your ph is locking out your P and thats causing your leaf symptoms,bring your ph up to 6.4 or so,feed them 1/4 strength nute at ph 6.4 ....actually at 300 ppm you should be good,but bring your ph up

 

[unregistered190]

Thanks Unc! They are getting 6.4 1st thing in the morning.

 

[Treetroit City]

Don't worry 190. It's not like they're gonna die on ya, these plants are resilient. You can treat them like shit for months and within two weeks have them humming and purring. Not that I recommend that kind of treatment but I do it all the time.
Since you're just starting your clones flowering I'm guessing you don't need them for a bit.

Holy lollypopping day. Did eight did girls today including the four gg I got at day 14. Also got the next round of OG's and a big ass RHS that will be run by itself under a light in 7 gallons of coco.

SPG are smelling sweeter and sweeter ev ers day at this point. Better than my swt 99 now and that was delicious. Dans I don't know if you remember the snatch pheno but she was right there with the muffin.

Hope to get my desktop back online this week as I got pics to post.

Oh yeah, got white OG and flaming cookie seeds up and looking cute.

 

[pinkus]

If you are making plywood faces to that mesh, couldn't you mount the fork receiver to the plywood and then just have bolts go through the slots in the mesh at the "corners"? That way the forces would be distributed across the whole face of the mesh....depending on how you attached the fork receiver... maybe I'm tooo baked to help lol

 

[unclefishstick]

ummm,thats what i said basically,plywood,mesh sandwich,bike mount on top bolted through...there will be pics in a couple hours of the finished tested rig...

 

[pinkus]

lol I started writing about how to attach the fork receivers but never got there... mounting that to the plywood... I think if it's not, it's gonna fuck with that mesh given any time and riding.


BUT you got it. continue... I shouldn't try to post when I'm testing cannacaps

and somewhere along the line I was gonna throw in Lock washers instead of locktight for removal purposes.