What's new
  • Happy Birthday ICMag! Been 20 years since Gypsy Nirvana created the forum! We are celebrating with a 4/20 Giveaway and by launching a new Patreon tier called "420club". You can read more here.
  • Important notice: ICMag's T.O.U. has been updated. Please review it here. For your convenience, it is also available in the main forum menu, under 'Quick Links"!

otis' vertical experiments and other projects

O

otis33

542g from the tent... one plant was almost a total loss due to pm, another was pretty bad. those wifi bu ds are so dense, they can be deceiving...I didn't think this harvest would be to good, but I'm pretty happy about it....I hoped for a pound when I set it up, so....:biggrin:
 
O

otis33

alright guys, I've got a bunch of sour bubble clones that are getting way too big.... I'm re doing the tent to accommodate more plants. I'm just going to get some cinder blocks and either some wood planks or cheap shelves of some sort and build shelves around the parameter... probably just do a row on the floor then another about 2' up, at least 16 plants and maybe more if 16 doesn't fill the space. I'll be doing multi feed dtw. I'm trying to decide the best way to build the manifold. I was thinking about just getting some octa-bubblers or maybe a pico style pvc w tophat grommets. I'm going to have to figure out a way to make the shelf and the plants by the door movable so I can manage the canopy. I'm also going to have to figure out how to plumb the waste. for this I was thinking I would get a bunch of cheap dr ip trays and maybe use some left over tire valve stems from an older ppk build and use them connected to 1/4" poly to drain. any suggestions from all you diy guys would be helpful. going to Lowe's to get the shelves, so pics well come soon. thanks for any input.
 
O

otis33

alright guys, I've got a bunch of sour bubble clones that are getting way too big.... I'm re doing the tent to accommodate more plants. I'm just going to get some cinder blocks and either some wood planks or cheap shelves of some sort and build shelves around the parameter... probably just do a row on the floor then another about 2' up, at least 16 plants and maybe more if 16 doesn't fill the space. I'll be doing multi feed dtw. I'm trying to decide the best way to build the manifold. I was thinking about just getting some octa-bubblers or maybe a pico style pvc w tophat grommets. I'm going to have to figure out a way to make the shelf and the plants by the door movable so I can manage the canopy. I'm also going to have to figure out how to plumb the waste. for this I was thinking I would get a bunch of cheap dr ip trays and maybe use some left over tire valve stems from an older ppk build and use them connected to 1/4" poly to drain. any suggestions from all you diy guys would be helpful. going to Lowe's to get the shelves, so pics well come soon. thanks for any input.
 
O

otis33

wifi beds
picture.php
picture.php
 
O

otis33

bought some of this to try and keep the pm on my flowering plants at bay...
picture.php

I must have been high or the directions are confusing, or both
picture.php

I'm still not clear on the application rate for this stuff.(1/3gal/100gal?). it stopped the advance of the pm, but if burnt my plants up.... or maybe I didn't let them dry completly before turning the lights on. the pistols are alll burnt up and the leaves are crispy. ok be harvesting the bottom in a week or 10 days so we'll see what happens. I have eagle 20 for the mom's and veg room.
 
O

otis33

so about 6-8 months ago, a friend mentioned that he was going to give me a clone of this plant called gak that was supposed to be super fire and I was not to hand it out.... he ended up going to prison and I never got it. fast forward a few months and my wife's friend, who also buys a fair amount our pot, comes over with this plant she got from her ex called gak... she's pretty ditzy and can't remember exactly what it's made up of(og kushx ak47), she thinks... anyway, here she is. I put her in a couple weeks ago. she says her ex claims a50 day flowering. well see. I have four more I will probably put in my small ppk get in a few days...
picture.php
picture.php
 
O

otis33

finally got around to cutting down and taking apart the big ppk room. I have to change the lay out or something. I'm making hash as I update, there was a bunch of hash material in addition to the 5 pound or so that I harvested so far...I still have some limbs hanging that look to be at least a half pound... it's slow going with eight grocery bags stuffed full of materiel using 5 gal bags
picture.php
 
O

otis33

a glimpse of what's to come in the tent. I'm going to stuff as many sour bubbles as possible in this thing. I've got some bigger ones that will go on the bottom and smaller ones on the shelves. Kind of a bold move with an unproven never flowered before plant. I've never heard someone complain about a shitty sour bubble pheno, so hopefully this will turn out good
picture.php
 
O

otis33

in the square pots are wifi;I will veg them for a couple two weeks or so and then they will go in the donut stacks. Scott's og is as good as wifi, but harder to grow. .. she is just an unruly, lanky, stretch machine. so wifi will be getting monocropped in several locations until something better comes along. Scott's will solo be grown, but not on a large scale. I have a BUNCH of seed plants and I'm excited to see how all these sour bubbles turn out...I trashed my madness mom... she was nice, but just wasn't the full package.
picture.php
 
O

otis33

my new dtw donut stack is coming together. I've been up all night working on grow related shit... the story of my life lately. this year I'm aiming to get more organized. this year was good; I made a lot of money, but it could have gone smoother. I could have had more harvests. winter is coming. with mmj on the horizon here my days of selling 4000$ lbs are numbered... time to tighten up my game and squeeze as many grams as possible from these bitches.:biggrin:
picture.php
picture.php
picture.php

I'm deciding whether to go with the pico top hat grommet pvc style or use the octabubblers I have laying around.... I'd like to have this thing automated today. I bought one of those 30$ timers flat 9 shared in the big plant ppk thread so I just need to figure out the manifold. I have tons of 1"pvc top hat grommets ts and 1/4" drip tube... everything I need I should have
 
O

otis33

went to the hydro whore to pick up some clay balls,a pump and some drip tube and then to Lowe's to buy a brute and some pvc. I'm going to use a couple of the octa bubblers I. already had. I should have this thing buttoned down before I go to bed.
picture.php
picture.php
 
O

otis33

shot of the bed, the only thing I've got going at the other house. I think 7 or 8 days in. they are looking healthy. I'm happy.
picture.php
picture.php
 
O

otis33

Been quite a while since an update...I had to be away for a couple weeks at the beginning of the month and only had 5 lights going; the wifi bed, my tent and one light finishing off a new strain. I haven't snapped a pic of the beds since I flipped them at the beginning of December. I underestimated stretch and didn't visit the site for 10 days and upon my return the plants had stretched nearly into the light. I will snap a pic later when I refill res tonight. the tent can be seen in my BOG by Otis thread... it's a clusterfuck, but I should get a decent amount of sour bubble from it. I'm flipping my small home ppk with a mix of 2wifi, 1 sour bubble, and two rare dankness commerce city kush which I believe is his take on og chem. this is a pic of the above left to right
picture.php
 
O

otis33

I have 16 wifi like this that willbe going into the donut stacks soon.
picture.php

along with tons of plants from a massive seed pop.
picture.php
 
D

DHF

Gladta have yas back around O....Hope all ducks get in a row for yas......

Peace....DHF....:ying:....
 
You must log in or register to reply here.

Latest posts

Latest posts

Top