oh yeah,my glue and swtc99 cuts are popping roots now,another day or so and they should be big enough to put in cups...another generation of glue on its way...damn i love that plant!!
You too ?
im having a hell of a time hanging my carbon scrubber....what do you guys use to support it when hanging from roof/ceiling?
build base for where its gona hang with 2x4s or whatever attached to studs. after thats done buy a pulley and attach to base of where your gona hang it. the pulley works with rope so make sure that you attach a secure handle a 5 feet away where you can knot th rope and stop before you hit the pulley. you need the base of the structure to have 4 hooks one in each corner with motorcycle straps so as yo have one loop on each side. so you raise the carbonfilter by attaching the rope to the carbon scruber , not just in the middle but make something so that it lifts evenly up. like rope around it on one side then the other and a rope that attaches both of them down the center where you can attach the rope for the pulley. so now you got the motorcyle straps hangin about 4 feet down and your raising the scrubber slowly. go about a few inches above the bottom part of the strap and knot the pulley rope on your stop handle few feet away. now wrap the motorcycle straps underneath the carbon filter on both sides and shorten them up as to support some of the weight of the filter. now move the filter up slowlye with the pulley rope and keep tighting the motorccycle straps for support until there little room to take the pulley out. probably about a foot. so now you got the pulley out and rope out all that should be left is the motorcycle straps on each end. tighten each side inch at a time so as to not let it fall out one end all the way to where you want it. you dont have to pull it all the way up if you dont wantas the motorcycle straps are super safe.
im having a hell of a time hanging my carbon scrubber....what do you guys use to support it when hanging from roof/ceiling?
pappy run the wire your self it not that hard, just make sure the power if OFF when your doing that conection.I didnt know there was more than one Bushy Older.
The PowerPack 600 came today. That was fast. They must have overnighted it. If anybody was wondering what it looks like
View Image
I guess I'm lucky dan. I have this in the basement, and its only about 10 feet from where I think i would run it up to the attic. Then Id drop it into the grow room.
Heres where some stuff goes upstairs. You cant tell in the pic, but theres some cables and wires going up there too.
My first choice is gonna be to try and either find an electrician to install a 20 amp circuit box in the grow room, using those 2 open slots. Hell, i think there's 3 open slots, i might as well use them all. Or if it sounds uncomplicated enough, I might try to do that myself. If I cant find a good choice for an electrician that is. And then if I cant do either of those 2 things, Im pretty sure I would be alright using a GOOd extension cord, plugged into that basement outlet, and up to the grow room.
And I took a look at my washer/dryer outlet. It looks like just a regular outlet to me. But whatda I know. Not that it matters. Im not planning on using it in any scenario, anyways.
DR P I love your outdoor stuff.Remember Doc, GOAT stands for Greatest Of All Time.
And when it comes to outdoor, theres no question who's the GOAT around this bike shop
and i love your kiefing skills too.
YOU ALL SUK!!!!
i know you guys have been waiting eagerly to see the latest addition to the cactus collection
the common name is a fishhook barrel cactus ...
this one is about 12 inches tall and about 18 across...