-
Happy Birthday ICMag! Been 20 years since Gypsy Nirvana created the forum! We are celebrating with a 4/20 Giveaway and by launching a new Patreon tier called "420club". You can read more here.
-
Important notice: ICMag's T.O.U. has been updated. Please review it here. For your convenience, it is also available in the main forum menu, under 'Quick Links"!
DIY PVC 4x8 Stand With Wheels!
- Thread starter Treetroit City
- Start date
You can still see the pictures if you search Google Images using the header that Third World used for each photo. for instance search "And here are the connectors I will use in the position they will be used." and you will find the photo of all the connectors.
Here are the pictures on google
https://www.google.com/search?q=Thi... Coast DIY PVC 4x8 Stand With Wheels&tbm=isch
https://www.google.com/search?q=Thi... Coast DIY PVC 4x8 Stand With Wheels&tbm=isch
Yep some of those are it. You can get a pretty good idea from those.
I've since went to version 2.0
I changed out the corner pieces and middle T's so that they now accept vertical posts for my scrog.
This table closest I made do with 1" pvc and the 1 1/4" corners. Will upgrade after harvest to 1 1/4" all around like I have with the table in the backround.
Another tip is that they, in my case anyway, need a cross brace to make two 4x4 sections. I've found without one the table does sag in the middle. With the brace it stays much more level.
I've since went to version 2.0
I changed out the corner pieces and middle T's so that they now accept vertical posts for my scrog.
This table closest I made do with 1" pvc and the 1 1/4" corners. Will upgrade after harvest to 1 1/4" all around like I have with the table in the backround.
Another tip is that they, in my case anyway, need a cross brace to make two 4x4 sections. I've found without one the table does sag in the middle. With the brace it stays much more level.
