Personal record for yield!!!!!!

[Waxmasta Flex]

Though this may be correct, the amount of people making budder in a harmful way is much higher then those whipping nicely purged shatter into budder for god knows why, so yeah, its true but doesn't matter.

so yea its true but doesnt matter? yea spoken like a true troll..

 

[Waxmasta Flex]

mines over 60% w kief

 

[Gray Wolf]

I would be interested in checking that out.

Thought someone might, but the ad seems to be gone, so I suspect it is.

 

[420mike]

Theres always next time...

 

[420mike]

Malfunction.. see next post.. LOL

 

[420mike]

Looking at this extra large extractor for now..

 

[jump117]

Weight may vary depending on the density of packing,
more correct indicate the internal volume
or dimensions of ID and length.

 

[Gray Wolf]

Looking at this extra large extractor for now..

[URL="https://www.icmag.com/ic/picture.php?albumid=43319&pictureid=1019877&thumb=1"]View Image[/URL]

Are you able to get the internal dimensions of the column?

 

[420mike]

I sent them an email last night with that same question. Will see if they get back to me.

 

[montroller]

The site says 50mm x 15".

 

[jump117]

If so, then the weight 200g on label is exaggerated about three times.

 

[420mike]

The response I got states: The glass is about 1/4" thick. The inner dimensions are 50 mm minus about 1/4" by a 15" length.

 

[Gray Wolf]

The response I got states: The glass is about 1/4" thick. The inner dimensions are 50 mm minus about 1/4" by a 15" length.

1.46" ID is too large for efficient single pass column extraction. I prefer to stay under 1" because it hard to pack evenly enough to not have the butane find easy ways through and to adequately wet the injection end.

1.46" X 1.46" X .7854 X 15"= 25.1 cubic inches. At our 10 mesh prime bud packing density of 4.2 grams per cubic inch, it would hold about 105 grams.