What's new

The Farmhouse

D

DHF

Thanks g..I needed to be able to disconnect to pull forward for trimming. I think it will work pretty good. The Drain pipes just pop on and off are not glued so as to be able to remove the bottom res for cleaning etc. Now i just need to work on ventilation and or seal up the hoods. I have 2 exhaust fans and at 2x a minute air exchange, yet the temps at canopy level are still hovering at 80deg. I want 77! Then its cloning time!

Ive been reading alot on AL B FUCTS"s tHREAD over on RIU. Hes a master at Sog grows and its helping alot.

Cheers mates!
Knowledge is power my buddy , and you actively seeking out different aspects and points of view only shows how hungry and dedicated yas are to ultimate perfection......if.....

There is such a place.........but......80`s light`s on is cool with the air exchange FHC , and it`s not gonna force yer plants ta stretch more , but rather accept the inherent CO2 in the air exchange for increased metabolism and ultimate increased swellage when the time comes......anyways.....

You`re getting there Bro......

Peace.,.....Freds......:ying:......:blowbubbles:
 
Knowledge is power my buddy , and you actively seeking out different aspects and points of view only shows how hungry and dedicated yas are to ultimate perfection......if.....

There is such a place.........but......80`s light`s on is cool with the air exchange FHC , and it`s not gonna force yer plants ta stretch more , but rather accept the inherent CO2 in the air exchange for increased metabolism and ultimate increased swellage when the time comes......anyways.....

You`re getting there Bro......

Peace.,.....Freds......:ying:......:blowbubbles:

This makes me happy! It will save me alot of work for sure.

TANKS AGAIN my Friend! :tiphat:
 
G

GMax

I am sure you already mentioned this but where did you get that green fencing??? I wanna make a drying rack with it....

also..in the low 80s isn't that bad... if you are worried about temps are you gonna insulate/reflectix the sog system and/or rez
 
The fencing is at home depot. I think it's called rabbit or poultry fencing...cheap enough.

I'm High G.....BUT, I envisioned reflectix months ago in a stoned dream! The reflectix will be layed upon the top and holes cut for plants. The res side will have a removable wall of reflectix that also covers the res.
 
D

DHF

The fencing is at home depot. I think it's called rabbit or poultry fencing...cheap enough.

I'm High G.....BUT, I envisioned reflectix months ago in a stoned dream! The reflectix will be layed upon the top and holes cut for plants. The res side will have a removable wall of reflectix that also covers the res.
EVERYTHING that ain`t green covered in reflectix is yer friend , and......

Makes the grow area it`s own air-cooled reflector bouncing lumens up , down , and all around ftw bet on it.........regardless if it`s a flat or vertical setup..........

I love the attention to detail with the mad "DIY" skills Bro.......Keep dialin FHC....can`t wait ta see a flat canopy of budsicles.......

Peace....Freds......:ying:.........
 

Cayenne

Member
Thanks g..I needed to be able to disconnect to pull forward for trimming. I think it will work pretty good. The Drain pipes just pop on and off are not glued so as to be able to remove the bottom res for cleaning etc. Now i just need to work on ventilation and or seal up the hoods. I have 2 exhaust fans and at 2x a minute air exchange, yet the temps at canopy level are still hovering at 80deg. I want 77! I should be taking clones right now...but im waiting to finish this room so i can just clone in there for now. This will give me time after i clone to work at setting up the mother and clone tent.

Ive been reading alot on AL B FUCTS"s tHREAD over on RIU. Hes a master at Sog grows and its helping alot.

Cheers mates!

Fantastic reference good sir
 

Hydrosun

I love my life
Veteran
The fencing is at home depot. I think it's called rabbit or poultry fencing...cheap enough.

I'm High G.....BUT, I envisioned reflectix months ago in a stoned dream! The reflectix will be layed upon the top and holes cut for plants. The res side will have a removable wall of reflectix that also covers the res.

Prodex is a much better product than reflectix. Google "insulation for less" great stuff.

:joint:
 
D

DHF

Prodex is a much better product than reflectix. Google "insulation for less" great stuff.

:joint:
You know........It`s funny you bring up "Prodex" HS.......Some folks`re remodelin a beach house down the way from mine , so I went up and checked it out the other day while I was walkin the dawg and......

The carpenters were putting it on the roof decking as a "radiant barrier" before the standing seam metal roof was to be installed......so.....

I asked the Contractor about the shit , and he proceeded to tell me that it has a higher R value than reflectix and comes in 6' rolls instead of 4' with reflectix , and it`s like squishy clear foam on the inside compared to bubblewrapped thicker reflectix......that said......

If it has more insulative qualities than reflectix , covers more sq ftg per roll , and reflects/disperses/diffuses light , and blasts lumens up , down , and all around the rooms "better" or at least equal to reflectix , then......

I`m all about upgrades that have a longer shelf life guaranteed cuz it`s stronger and sturdier than reflectix.........I mean.....Yas couldn`t use reflectix as a radiant barrier on a roof and then install a metal roof on top of it cuz all the bubbles would pop , so......

I`ve not been to insulation4less.com( I think that`s what was on the pkgs.) outta Texas to compare prices , but thanks for bringin it to the table HS......Anything that helps the grower`s bottomline production efforts is what I`m all about..........

Good lookin out Bro......:tiphat:....but........I wouldn`t want a FedEx or UPS truck pullin up in front of my grow op with however many rolls of that shit it took to cover everything that ain`t green in it , cuz yas can`t get that shit at Lowes and Home Depot and no one round my parts have even heard of it.....

The homeowner found it online and had like 12 rolls shipped in for that roof , so a safe addy or livin in medville with a scrip comes ta mind before orderin Prodex....but......looks like some good shit.......

Peace.....Freds......:ying:.....
 
Last edited:

MaynardG_Krebs

Active member
Veteran
I just found Prodex on eBay.. They want $225.00 for 1000 square feet (4' X 250')... that's not that bad, but they want another $125 for shipping to my area.. maybe less for someone closer to the lister.. looks like interesting stuff, but I'd have to source it more locally to avoid that shipping cost.

mgk :tiphat:
 

Hydrosun

I love my life
Veteran
Keep watching their website, they have free shipping sales every now and again. It is a great product.

:joint:
 
Here's what i'm striving for. I moved my mothers under a 600 to try and speed up and fatten the future clones. Just waiting a few more days and then its time to get started.

sog.jpg
 

Attachments

  • sog.jpg
    sog.jpg
    131.3 KB · Views: 13

Avinash.miles

Caregiver Extraordinaire
Moderator
ICMag Donor
Veteran
who wouldnt strive for something like that? ??
vegn under the 6 will get u tough lil ladies, good move cat
 
Lights on at 76...but 62 night? I never needed a heater but dam... i want this cake to come out right. I turned off the ex fan but i dont think it will help much.
 
:coffee: It just occurred to me that i have a dehumidfier in the room, and i can turn it on. :laughing: the humidity could come down a bit too. Friday.....this is what you get wen you go to the bar at 11am.
 
D

DHF

Tighten up over there yas drunk......:moon:......I never allowed my lights off temps to go below 72 regardless of lights on conditions.......

Burn some meat and sober up my buddy......and.....ALWAYS have environmental equipment in place to maintain goody in the grow areas......

Peace.....Freds....:ying:....
 
But... I love to tighten my screws with a stiff drink. LOl

Rainy daze and pretty waitresses' wearin skimpy outfits... Days like this are priceless.
 
Top