What's new

trying to plan a nft system

well hello there guys
so here it goes
the room dimensions are 1 meter by 1.60 hight 2.50
i wanted to build a two floor nft system
i have either use 250w lights,400 or 600
i thought the 400 would be ideal but i have right now a 400w and a 250w waiting to be used
i have three cooltubes,although not vertical set ones but i think that with adding a ring holder and attaching it to the base you can get the same effect generally

my question was what do you think of the dimensions
i do want the possibilty of growing sativa clones or indica clones
not at the same time of course but i'm guessing i would be limited by the space i have so i would always have to match the genetics to the size i built
i have inside the room a sewer drain so i can easily dump all the water in the system and fill her up again.
by what i heard the best air intake is not a direct air intake,meaning you shouldn't push in air directly at the plants,rather let the room get it passive or far from the plants,and the outtake of the room can only be to a larger room and not outside

the system is designed to work mainly in the winter her because in the summer it just wont get enough fresh air from the a/c working all the time
hopefully i will be able to get two solid crops from the room and that should be more than enough for a solid crop

so i have one 400w hps(i might buy a new bulb because it's already been used for a few cycles)
another 250w hps(totaly new)
a 250w mh (for the mothers) in a small 80X80 tent
and right now i still have the 600w hps that i might use to flower a few mothers or see of grean,still not sure what to do with it because i just don't have the space to build an optimal setup for it,maybe later if i clear another room in the house i can start using it again,but for now it's just not giving me enough product compared to the setup so it's just a waste

טוב עכשיו בעברית
החלטתי לנסות ולבנות מערכת אנ אפ טי לייחורים
הרעיון הוא להפעיל אותו רק בתקופה של החורף בארץ
בתקווה להצליח לגדל שני סבבים של ייחורים בחורף אחד וזה אמור להספיק לי
מידות החדר הם מטר על מטר שישים על שתיים וחצי מטר
יש לי מנורה 600וואט אייץ פי אס
400 וואט אייץ פי אס
250 וואט איץ פי אס
250 אמ אייץ
הרעיון הוא לגדל את האימהות על 250וואט אמ אייץ
להישתמש או במנורה של 400 ומנורה אחד של 250 או להביא עוד מנורה מאחד מהמידות
תלוי מה יותר אידיאלי לשטח של הארון
הרעיון הוא שאין לי איך להגדיל את השטח הזה אז עדיף לי פשוט להתאים אליו את המנורה
ולהוציא מזה את המקסימום שניתן
רוב הסיכויים שזה ייתן לי הרבה יותר משקל ממה שאני מוציא כרגע בכל מקרה
יש בחדר הזה ניקוז של ביוב כך שאין לי שום בעיה להיפטר מכל המים במערכת ולהכניס מים חדשים בלי להיתאמץ
מבחינת האיוורור הבנתי שכניסת אוויר פאסיבית או אקטיבית אבל העיקר שלא יהיה ישירות על הצמחים אלה במקום מרוחק יותר והיציאה של האויר החם תהייה ישירות לחדר
החדר עצמו בחורף נשאר פתוח ולכן נשאר מאוד מאוורר והטמפרטורה יחסית נמוכה כך שזה מאפשר לי להגיע בחורף דיי בקלות לטמפרטורות שאני רוצה,אפילו הייתי צריך לנתק את היציאה של האויר החם בחורף כמה פעמים כדי לשמור על טמפרטורה סבירה בארון

השאלה היא איזה מנורות לדעתכם מתאימות לחלל וישאירו לי מקום לגדל גם ייחורים אינדיקות וגם ייחורי סאטיבות(לא במקביל כמובן)אבל שהמידות כן יאפשרו לי להיתגמש קלוש ולא להיות נעול רק על זן אחד
כמובן שאני צריך לתכנן מראש ולדעת איזה גודל הזן מגיע בערך כדי לדעת את המגבלות אבל מה שאני לא רוצה זה להיצטרך להחליף את המנורות באמצע בגלל שריפה של העלים
חשבתי גם אולי להישתמש במנורה אחד של 400 אולי בחלק העליון של הארון וב-250 בחלק התחתון ואז זה יתן לי קצת מקום עבודה לזוז
או להיפך
בכל מקרה אני אשמח להמלצות בעניין

נ.ב.

הייחורים אני יכול לגדל או על עדן החלון בהתחלה ואז לחדר פלורוסנטים או ישר בחדר פלורוסנטים עם פרוגרטור ומפיץ לחות

the clones are either going to be grown under sun light and then cfl's or directly to cfl's and i have a humidifier and a progrator to keep the humidity in the first days of the clones

אני אשמח לכמה שיותר עצות כדי שאני יוכל לתכנן הפעם כראוי וסוף סוף יהיה לי סיבוב שפוי
 

SoG

Member
here you go, NFT Aero cloner plans


attachment.php


enjoy





:ying:
 

Attachments

  • aerocloner_II.jpg
    aerocloner_II.jpg
    45 KB · Views: 10
sog - thanks but i think i forgot to mention the plant is for a vertical nft system like heath's
i want to know which light i can get in their and what tube size and hole seperation
stuff like that
do you have one of a vertical setup?
 

SoG

Member
no such thing; Heath is showing you the concept,
you will need to custom fit your environment.

with that in mind; you will need to gear up for clone production
enough to fill up your system at once etc...
 

bombadil.360

Andinismo Hierbatero
Veteran
SoG, if you or Angel were to ask me, I'd say, that hydroponics is way too complex and that Angel should follow the Keep It Simple method...

instead of hydro, he could go with a blend of coco-coir and organic mix substrate.

instead of vertical, he could use two 400w bulbs with six plants with the space he has.

he could end up with over 200 grams each harvest, less troubles, and enough for his personal needs. with 800w, he could even get better... shit, I'd say, with two 250w, in a regular, six plant grow, with screens, he could get dried 200gs.....

enough for his head and in case anything goes wrong, like pests etc... no need for such complex systems imo.

what say you guys?

peace
 
אני בטוח לא יכול לעזור לך אבל רוצה לעשות שינוי אצלי כדי לעבור את החצי גרם וקצת לוואט שאני מוציא עכשיו.

מערכת כמו זאת שאתה מעוניין לבנות די גדולה עלי כרגע.

האוהל שלי מחולק לשתיים כשכל צד בערך באותן מידות של הארון שלך.

אני מעוניין להוריד את מספר הצמחים מתשע לחמש,מקסימום שש בכל צד של האוהל.

אני חושב על למתוח רשת ולעשות סקרוג מתחת למנורת 600 וואט.

שלושה שבועות צמיחה מחוץ לאוהל מתחת לפלורסנטים,עוד שלושה שבועות של צמיחה ומילוי של הרשת מתחת למנורת 600 בתוך האוהל,ואז פריחה אחרי שכל הרשת מלאה.



בעתיד הקרוב אני מתכנן לבנות יחידה אחת כזאת ולראות מה ההבדל בין אדמה להידרו.

http://www.youtube.com/watch?v=105e3eALKPs

אצלך יש גם גישה לביוב מה שהופך הכל ליותר קל...שיהיה בהצלחה אנג'ל,אני בהחלט יעקוב אחרי ההתפתחויות כאן:biggrin:
 
אני מאוד אוהב לדוג.....כשרק התחלתי לדוג הייתי יושב על המזח זורק חוט ניילון עם קרס ובצק ויושב ומחכה לדג.......יום אחד ראיתי כמה חברה זורקים חכה קצרה ומז'רז'רים במהירות...הלכתי לראות מה הם עושים וגיליתי סוג פתיון חדש...בובות פלסטיק שמדמות דגים חיים,מעניין....שבועיים לאחר מכן היתה לי חכת ז'ירז'ור ושתי בובות למתחילים....מאז עברו כמה שנים,חוט הניילון התחלף בחוטי פיירליין,הבובות השתנו...למדתי לעשות מלכודות וקשירות חדשות וטובות יותר וכו'....ככל שהזמן עבר התחביב התפתח ואני השתפרתי...אני מקווה שגם כאן כל הנסיונות ישתלמו בסופו של דבר....

בכל אופן תודה על כל העזרה,הקישורים והעצות המועילות:biggrin:
 

Latest posts

Latest posts

Top