Bumble Buddy
Active member
Holds about an ounce.
How to..the pictorial making of "Beer Bottle BHO"®
- Thread starter Maximo
- Start date
Holds about an ounce.
Bumble Buddy
Active member
Nope, I've done about 10 runs with it no problems, though I did crack the neck of another bottle trying to recap it- just needed better technique 
- now I just crimp it if needed then snap it on with my thumb 
- now I just crimp it if needed then snap it on with my thumb guerrillafarmer
New member
I know, old thread. But a goodie!
My question is this: Instead of normal 12 oz and can of butane, could a 40 oz and three cans of butane be sub'd for a larger production run?
My question is this: Instead of normal 12 oz and can of butane, could a 40 oz and three cans of butane be sub'd for a larger production run?
Maximo
Member
I've not done that with a big bottle but have always wanted to cram an empty 5th and shoot 3-4 cans thru it, I have done it with a big stainless tubes (200+gms) back in the OG days and used 3 cans of tane if I remember right and had no problems.
I saw pics of a huge stainless tube about 3' (1m) round and 6'(2m) tall in mexico, they hooked up a propane system to it and made gallons of oil, which they then used to make some kind of jelly hash, they had a butt load of this stuff, had me drooling at the scale of it.
I saw pics of a huge stainless tube about 3' (1m) round and 6'(2m) tall in mexico, they hooked up a propane system to it and made gallons of oil, which they then used to make some kind of jelly hash, they had a butt load of this stuff, had me drooling at the scale of it.
guerrillafarmer
New member
Aha! So a foh-oh is feasable! Or at least in theory. Gonna have to get myself in a postion to try.
I made one of those ,,( thanks for the inspreation Maximo) just like bumble buddy did . I been enjoying BHO for the first time. A really clear high. I do have one question ....I cut the bottom of the bottle off and stuffed the bottle full of popcorn buds and a little trim, Used one can of butane ..Vector... Should I have used more butane??? I need to make some more .....
coloradomedical
Member
Very nice piece of work, but miller? C'mon man, your not in highschool anymore. 
lol.
lol.Rullerdennu
New member
Just made my own BHO axtractor, and did a little test run. I didn't fill the bottle at all, and i didn't grind my popcorn buds before extracting. I used about half a bottle of buthane lighter gas, bud no oil came out, only the butane...
So where do i go from here?
Do i grind the weed before bho'ing AND does it have to be jam packed to have an effect?
So where do i go from here?
Do i grind the weed before bho'ing AND does it have to be jam packed to have an effect?
I used to BHO with a pvc tube but changed to a ss turkey baster program for the potential health concerns pvc may have. I just tried the beer bottle extraction and have a question. How much liquid should come through into my collection container? I use 10 oz bottles of vector and seem to get 2 oz or so that comes through. And not alot of product. Most seems like it is still in the material and not coming through. I noted this problem using the baster also.
The old pvc tube seemed to drain alot more tane into the container and have alot more product for an end result. The pvc system was capped with pull off ends and the drain end had a few holes in it with coffee filter. There was always a alittle pressure in the tube with this method. Does pressure help to keep the tane in liquid form? Longer contact and better drainage?
I have enjoyed making and utilizing BHO for 10 years. Just curious to gain some thoughts on my observations
The old pvc tube seemed to drain alot more tane into the container and have alot more product for an end result. The pvc system was capped with pull off ends and the drain end had a few holes in it with coffee filter. There was always a alittle pressure in the tube with this method. Does pressure help to keep the tane in liquid form? Longer contact and better drainage?
I have enjoyed making and utilizing BHO for 10 years. Just curious to gain some thoughts on my observations
great idea i was just looking online for glass tubes to use....
for those of ya'll w/o a dremel tool
1.fill the bottle half way with water.
2.hold(by the neck of bottle) in one hand w/the rim of the bottle just barely above the top of your fist.
3.use your dominant hand and w/the lower palm strike the rim of the bottle. the pressure from the strike should knock the bottom of the bottle off. if not you will hear a donk from the bottle. try a little harder..... but be careful not to bruise your hand. this will also make for a great bar trick.
for those of ya'll w/o a dremel tool
1.fill the bottle half way with water.
2.hold(by the neck of bottle) in one hand w/the rim of the bottle just barely above the top of your fist.
3.use your dominant hand and w/the lower palm strike the rim of the bottle. the pressure from the strike should knock the bottom of the bottle off. if not you will hear a donk from the bottle. try a little harder..... but be careful not to bruise your hand. this will also make for a great bar trick.
coloradomedical
Member
it just hurt my hand, good luck.
take it to a Japanese restaurant and let them cut the bottle bottom off with a katana
There are videos on youtube about cutting bottles with string, water and acetone.
beer bottle is too wide really, baster should be ok tho.. too wide a tube, not much tane makes it thru it seems.
