B
Bud Bug
So lets see some of the ways you have improved on your grow tent designs. I have quite a few ideas but don't want to release them till I test it out first 
But here's my first contribution.
I needed some way to hang my 8" Honeywell fans and this is what I came up with.
This is done using 1/2 Conduit Body tee and 1/2" Metal Conduit Pipe. What you have to do is file down the inside of the Conduit Body which is really soft metal in oerder to get it over the tent poles. A small round file will do it and it only takes 30 second per tee. Once thats done and you slip the tee's over the poles you can use the metal screws to hold the tee down onto the tent poles. If the screws are too small you can used the longer screws from a cable connector.
Then you take the conduit pipe and cut it down to size and install it horizontally.
Here are the photos of the finished product. Since its held in by screws its easy to move it up and down.
But here's my first contribution.
I needed some way to hang my 8" Honeywell fans and this is what I came up with.
This is done using 1/2 Conduit Body tee and 1/2" Metal Conduit Pipe. What you have to do is file down the inside of the Conduit Body which is really soft metal in oerder to get it over the tent poles. A small round file will do it and it only takes 30 second per tee. Once thats done and you slip the tee's over the poles you can use the metal screws to hold the tee down onto the tent poles. If the screws are too small you can used the longer screws from a cable connector.
Then you take the conduit pipe and cut it down to size and install it horizontally.
Here are the photos of the finished product. Since its held in by screws its easy to move it up and down.
