So heres the plan. Trying to set up this setup to harvest one 4x8 tray every month. Each tray with approximately 40-44 clones in 6x6 rockwool cubes with drip lines.
Starting off with the veg room. Very simple
1000w MH
435cfm exhaust out of room w/ passive intake
4x4 tray with 54g res flooding every 8hrs for 5 mins.
Lights on 24hrs.
Pics are at day 20 of tray life after being transplanted from 1in RW cubes into 6x6 RW cubes.
Been feeding Nutriplus Grow A&B, Sugar Daddy, Diamond Nectar, Superthrive foliar every now and then.
PPM between 1000-1500 entire grow, been recently seeing some nute burn due to low res water level. Have corrected the problem.
So veg room is under control. Stays nice and cool during winter months.
Onto the veg Room
Here i have a lot going on.
4-1000w HPS in a row for my
2-4x8 trays with drip manifold for 40-45 sites, cooled by
2-435cfm 6" centrifugal fans. lights have in/out take out of room
30-2.5g ebb/flow buckets w 55g res
I am planning on every month moving my veg tray clones (45) to my 4x8 trays for a perpetual sog type grow. I am stuck on a few setup things:
1. should i use one reservoir for both 4x8 trays, or two separate?
the plants will all be flowering but at different stages, should i
keep two reservoirs to better handle the nutes for each tray or just one res for both trays?
2. if one for each, how many gallons should each be?
if one for both im thinking a 115g res. is it enough?
3. the buckets do not need anything. they will use leftover light coming from 1k's to help with blooming.
ive included some pics of veg room and plans for completion of flowering room. take a look and feel free to ask.
buckets will get either bubba kush clones or cuts from a mother OG im preparing.
please ask questions as i feel like im missing few things and could always use another set of eyes on this project.
thanks icmag
Starting off with the veg room. Very simple
1000w MH
435cfm exhaust out of room w/ passive intake
4x4 tray with 54g res flooding every 8hrs for 5 mins.
Lights on 24hrs.
Pics are at day 20 of tray life after being transplanted from 1in RW cubes into 6x6 RW cubes.
Been feeding Nutriplus Grow A&B, Sugar Daddy, Diamond Nectar, Superthrive foliar every now and then.
PPM between 1000-1500 entire grow, been recently seeing some nute burn due to low res water level. Have corrected the problem.
So veg room is under control. Stays nice and cool during winter months.
Onto the veg Room
Here i have a lot going on.
4-1000w HPS in a row for my
2-4x8 trays with drip manifold for 40-45 sites, cooled by
2-435cfm 6" centrifugal fans. lights have in/out take out of room
30-2.5g ebb/flow buckets w 55g res
I am planning on every month moving my veg tray clones (45) to my 4x8 trays for a perpetual sog type grow. I am stuck on a few setup things:
1. should i use one reservoir for both 4x8 trays, or two separate?
the plants will all be flowering but at different stages, should i
keep two reservoirs to better handle the nutes for each tray or just one res for both trays?
2. if one for each, how many gallons should each be?
if one for both im thinking a 115g res. is it enough?
3. the buckets do not need anything. they will use leftover light coming from 1k's to help with blooming.
ive included some pics of veg room and plans for completion of flowering room. take a look and feel free to ask.
buckets will get either bubba kush clones or cuts from a mother OG im preparing.
please ask questions as i feel like im missing few things and could always use another set of eyes on this project.
thanks icmag
