Nuttso's Mini Cabinett

[nuttso]

Hello everybody,

This is my first time to post on this forum. I wan't to build an micro-fluo cabinet for a good friend of mine. I'm sure i'll need some help later. For now i only can share some cheap pics made with my mobile cam.

Here is what i think would fit nicely in this closet:

LIGHTNING:

4 x Osram T5 FQ 39W/827 HO High Output LUMILUX INTERNA G5 3100 Lumen 2700K

4 x Osram T5 FQ 39W/865 HO High Output LUMILUX Daylight G5 2850 Lumen 6500K

2 x Osram EVG QTP5 2x24-39 Quicktronic Professional for T5 HO

4 x Osram Starter 30-65W 230V Safety

4 x T5 Reflektor

4x light socket

VENTING:

4 x Pc cooling (not sure wich i'm gonna use) (85 m³/h) (<20db)

MEDIUM & NUTES:


1 x Canna Pack

* 1 Liter Canna Terra Flores
* 1 Liter Canna Terra Vega
* 1 Liter Canna PK 13-14 Phosphor-Kaliummischung
* 1 Liter Cannazym
* 1 Liter Canna BioBoost

1 x Canna Terra Professional (not sure on this, any advice?)

1 x ppm/ec ph meter

1 x filter for the water to get the ec at 0.2-0.4 before mixing (advice too pls.)

First run will be with canna, but i wan't to do everything simple and organic later.

Here some pics of the closet:

 

[FreezerBoy]

What size is the fan and what size are the intake holes?

Hard to say with the lack of specs but, IF that's a 4" fan and IF those are 1/4 inch holes you'd need 550 of them to feed the fan properly. The easiest way to achieve negative pressure with adequate airflow is to punch 3 equal sized holes in the cab. Two passive intakes at the bottom, one at the top for the fan.

 

[nuttso]

 

[nuttso]

What do u think about this?

 

[Melkor420]

Very cool box bro! Can't wait to see what kind of plants and what kind of grow medium you are going to use! Good luck!

 

[Shackleford Rus]

where did u get that bong? its like the one in rocknrolla. sweet.

 

[Tleom]

Thanks for sharing your pics. It looks like you are going to have a sweet grow going on.

Those reflectors look sharp.